Showing 73–84 of 128 results
Sensors Modules
MCU-758 Hall Current Sensor ACS758LCB-050B- PFF-T Linear Current Sensor Module
In stock
₹440.00 (Incl. GST)Specifications:
Working voltage: 3V-5V (MAN SV)
Static output voltage: VCCi2
Working current: 135m2A (MAX)
Small in size, with easy mounting capability.
Monolithic Hall IC for high reliability
MG811 Carbon Dioxide Sensor For Carbon Dioxide Detector Module
In stock
₹2,475.00 (Incl. GST)Specifications:-
Sensor Type: Gas Sensor
Chip: MG811
Gas Sensitive: Carbon Dioxide
Operating Voltage (V): 6V DC
Dimensions: 3.2×2.2×2.9 cms
Weight: 10 grams
Mini USB ATmega32U4 Pro Micro 5V 16MHz Board Modules
In stock
₹450.00 (Incl. GST)Microcontroller: ATmega32U4, 16MHz
Memory: 32KB Flash, 2.5KB SRAM
USB: Mini USB for power and communication
GPIO: Digital, analog, and power pins
USB: Direct USB HID functionality
MLX90614ESF Non-Contact Human Body Infrared Temperature Measurement Module
In stock
₹795.00 (Incl. GST)Features:
Small size,low cost
Easy to integrate
Factory calibrated in wide temperature range: -40 Celsius to 85 Celsius for sensor temperature and -70 Celsius to 380 Celsius for object temperature
High accuracy of 0.5 Celsius over wide temperature range (0-50 Celsius for both Ta and To)
High (medical) accuracy calibration
Measurement resolution of 0.02 Celsius
Single zone version
SMBus compatible digital interface
Customizable PWM output for continuous reading
Voltage 5V
Simple adaptation for 8 to 16V applications
Power saving mode
Different package options for applications and measurements versatility
Automotive grade
Board Size:19.38*11.2mm
MPU-6050 3-Axis Accelerometer and Gyro Sensor Module
In stock
₹210.00 (Incl. GST)Specifications:
MEMS 3-aixs accelerometer and 3-axis gyroscope values combined
Power Supply: 3-5V
Communication : I2C protocol
Built-in 16-bit ADC provides high accuracy
Built-in DMP provides high computational power
Can be used to interface with other IIC devices like magnetometer
Configurable IIC Address
In-built Temperature sensor
MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module
In stock
₹450.00 (Incl. GST)Accelerometer, Gyroscope, and Magnetometer
Power Supply: DC3.3V-5V
Chip: MPU9250
Size: 22 mm x 17 mm.
Gyro range : ± 250 500 1000 2000 ° / s
Acceleration range: ± 2 ± 4 ± 8 ± 16g
Magnetic field range: ± 4800uT
9 DOF modules
MQ-135 Module (Ammonia, Sulphide and Benzene Gas Sensor)
In stock
₹135.00 (Incl. GST)Specifications:
Wide detecting scope
Fast response and High sensitivity
Stable and long life
Operating Voltage is +5V
Detect/Measure NH3, NOx, alcohol, Benzene, smoke, CO2, etc.
Analog output voltage: 0V to 5V
Digital output voltage: 0V or 5V (TTL Logic)
Preheat duration 20 seconds
Can be used as a Digital or analog sensor
The Sensitivity of Digital pin can be varied using the potentiometer
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
In stock
₹105.00 (Incl. GST)Operating Voltage is 5V
Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
Can be used as a Digital or analog sensor
The Sensitivity of Digital pin can be varied using the potentiometer
Long life and low cost
Simple drive circuit
MQ-3 Alcohol Detector Gas Sensor Module
In stock
₹120.00 (Incl. GST)Specifications:
Operating voltage: 5V
Load resistance: 200KΩ
Heater resistance:33Ω ± 5%
Heating consumption:<800mw
Sensing Resistance:1 MΩ – 8 MΩ
concentration Scope:5 – 500 ppm
Preheat Time: Over 24 hour
MQ-4 Module (Methane ,CNG Gas Sensor)
In stock
₹94.00 (Incl. GST)Specifications:
Sensor Type Semiconductor
Power requirements: VCC – 5V±0.1
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output: 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detection Gas: Natural gas/Methane
Detection Concentration: 200-10000ppm (Natural gas / Methane)
Interface: 1 TTL compatible input (HSW), 1 TTL compatible output (ALR)
Heater consumption: less than 750mw
Operating temperature: 14 to 122 °F (-10 to 50°C)
RH Related humidity less than 95%Rh
O2 Oxygen concentration is 21% (standard condition) – Oxygen concentration can affect sensitivity
Load resistance: 20KΩ
Sensing Resistance Rs: 10KΩ- 60KΩ (1000ppm CH4)
Preheat time:Over 24 hour
Standard Encapsulation Bakelite, Metal cap
MQ-5 Methane LPG Liquid Propane Gas Sensor Module
In stock
₹95.00 (Incl. GST)Specifications :
Detecting Concentration: 300 to 10000 ppm
Input Voltage: 5 VDC
Power: 150 mA
Digital Output Voltage: TTL digital 0 and 1 (0.1 V and 5 V)
Analog Output Voltage (relatively clean): 0.1 V to 0.3 V
Analog Output Voltage (highest concentration): 4 V
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module
In stock
₹90.00 (Incl. GST)Specifications:
Operating Voltage is +5V
Can be used to detect LPG or Butane gas
Analog output voltage: 0V to 5V
Digital Output Voltage: 0V or 5V (TTL Logic)
Preheat duration 20 seconds
Can be used as a Digital or analog sensor
The Sensitivity of Digital pin can be varied using the potentiometer