Showing 1–12 of 31 results
Shop
12x12x17mm Tactile Switch – 4 Leg Through Hole PCB Mount – SPST
In stock
₹10.00 (Incl. GST)Specifications
Type : Tactile Push Button
Color : Black / Sliver
Material : Plastic
Length (mm) : 12
Width (mm) : 12
Height (mm) : 17
Number Of Legs : 4
12x12x5mm DIP Tactile Push Button Switch
In stock
₹8.00 (Incl. GST)Specifications:
Operating Voltage: 12V DC
Operating Current: 50mA
Switch Type: Momentary
Operating Temperature Range: -20°C to +70°C
Through-hole design.
Shaft Shape: Round
Function: Push to ON
High operating force (3.0N or 3.6N) suited to automotive equipment requirements
The long life of 300,000 cycles realized despite the high operating force
Middle stroke (1.05mm)
12x12x8mm DIP Tactile Push Button Switch
In stock
₹8.00 (Incl. GST)Specifications:
Operating Voltage: 12V DC
Operating Current: 50mA
Switch Type: Momentary
Operating Temperature Range: -20°C to +70°C
Through-hole design.
Shaft Shape: Round
Function: Push to ON
High operating force (3.0N or 3.6N) suited to automotive equipment requirements
The long life of 300,000 cycles realized despite the high operating force
Middle stroke (1.05mm)
16mm Head Latching Emergency Push Button Switch 3Pin Red
In stock
₹270.00 (Incl. GST)Mounting Hole Size: 16mm
Switch Type: Latching (maintains ON/OFF state)
Connection Pins: 3 Pin
Actuator Color: Red
Material: Metal/Plastic construction (durable body)
Operation: Push to lock, release/reset manually
Current Rating: Typically 3A–5A @ 250V AC (varies by model)
Applications: Emergency stop control, machinery panels, robotics, DIY electronics
3 Pole Mehta Switch
In stock
₹15.00 (Incl. GST)Specifications
Application Used to isolate or control power in 3-phase circuits — commonly installed in industrial panels, motor control centers, and heavy machinery systems for load isolation, switching, and safety disconnection.
Color Black
Brand Mehta
Phase Three Phase
Material Copper
3.5″ inch ILI9486 TFT Touch Shield LCD Module 480×320 for Arduino Uno
In stock
₹859.00 (Incl. GST)3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
It can control the backlight to connect the transistor to a digital pin
480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
4-wire resistive touchscreen
8-bit digital interface, plus 4 control lines
6X6X7MM Tact Switch DIP 2Pin
In stock
₹4.00 (Incl. GST)Specifications:
Size: 6X6X7MM Size
Terminals: 2
Terminals lengths: 7mm
Height: 7mm
length: 6mm
Width: 6mm
Type: DIP
ARDUINO LELY PAD BIG ATMEGA328P
Out of stock
₹372.00 (Incl. GST)Features
Microcontroller : ATmega168V or ATmega328V
Operating Voltage 2.7-5.5 V
Input Voltage 2.7-5.5 V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
Flash Memory 16 KB (of which 2 KB used by bootloader)
SRAM 1 KB
EEPROM 512 bytes Clock Speed 8 MHz
Arduino Mega 2560 R3 Board A16U
In stock
₹1,199.00 (Incl. GST)Features
Microcontroller : ATmega2560
Operating Voltage : 5V
Input Voltage (recommended) : 7-12V
Input Voltage (limit) : 6-20V
Digital I/O Pins : 54 (of which 15 provide PWM output)
Analog Input Pins : 16
DC Current per I/O Pin : 20 mA
DC Current for 3.3V Pin : 50 mA
Flash Memory : 256 KB of which 8 KB used by bootloader
SRAM : 8 KB
EEPROM : 4 KB
Clock Speed : 16 MHz
LED BUILTIN : 13
Arduino Sensor Shield V5 Expansion Board
In stock
₹95.00 (Incl. GST)Quick Overview:
Retain the merits of the V4.0 version
Laminated design
PCB immersion gold processing technology
IIC interface
Bluetooth module communication interface
SD card module communication interface
APC220 wireless rf modules communication interface
RB URF v1.1 ultrasonic sensors interface
12864 LCD string of line and parallel interface
32 servo controller interface
Compatible With Arduino Uno
Arduino Uno R3 DIP
In stock
₹467.00 (Incl. GST)Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)
The Arduino Uno R3 is an open-source microcontroller board based on the ATmega328 chip. It features 14 digital input/output pins, 6 analog input pins, an onboard 16 MHz ceramic resonator, a USB connection port, a DC power jack, an ICSP header, and a reset button for the microcontroller. This board includes everything needed to support the microcontroller, making it easy to get started—simply connect it to a computer via a USB cable or power it with a DC adapter or battery.
Unlike previous models, the Uno does not use the FTDI USB-to-serial driver chip. Instead, it incorporates the Atmega16U2 (or Atmega8U2 up to version R2) as a USB-to-serial converter. The Arduino Uno can be powered through the USB connection or an external power supply, with the power source selected automatically.
External power can be supplied via an AC-to-DC adapter (wall-wart) or battery. The adapter connects through a 2.1mm center-positive plug into the board’s power jack, while battery leads can be connected to the GND and VIN pin headers of the power connector. The board can operate on an external supply ranging from 6 to 20 volts. However, if supplied with less than 7V, the 5V pin may output less than five volts, potentially leading to instability. Conversely, using more than 12V could cause the voltage regulator to overheat and damage the board. The recommended voltage range for the Arduino Uno is 5V to 12V.
Features
Operating Voltage: 5V
MCU: ATMEGA 328P
Input Voltage (recommended): 7-12V.
Input Voltage (limit): 6-20V.
Digital I/O Pins: 14
PWM Digital I/O Pins: 6
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB
Flash Memory for Bootloader: 0.5 KB
SRAM: 2 KB
EEPROM: 1 KB
Clock Speed: 16 MHz
Arduino Uno R3 with Cable
In stock
₹520.00 (Incl. GST)Specifications:
ATmega328 Controller
Digital IO 13
PWM Channel 6
Working Freq. 16MHz
DC current / IO 40mA
DC current / IO 50mA (3.3V)
Input Voltage 6V to 20V DC
Flash 32Kb
SRAM 2Kb
EEPROM 1Kb