Showing all 7 results
Shop
38Pin CP2102 ESP-32 WiFi + Bluetooth Development Board with Type-C USB Interface
Out of stock
Original price was: ₹492.00.₹450.00Current price is: ₹450.00. (Incl. GST)- Supply Voltage: 2.2 V ~ 3.6 V
- GPIO Pins: 38
- Current: 80 mA
- Data Rate: 54 Mbps.
- Flash Memory: 32Mbits
- Frequency: 2.4 GHz.
ESP-WROOM-32 38 Pins WIFI Bluetooth Networking Smart Component Development Board
In stock
₹415.00 (Incl. GST)Specifications:
NodeMCU based on ESP-WROOM-32 module
ESP32 is a dual core 32-bit processor with built-in 2.4 GHz Wi-Fi and Bluetooth
Wi-Fi:802.11 b/g/n
Bluetooth V4.2 – Supports BLE and Classic Bluetooth
520KByte RAM
3.3V Operating voltage range
Maximum Operating Frequency : 240 MHz.
Analog Input Pins: 12 bit, 18 channels.
Based on ESP32 DEVKIT DOIT
30 GPIO Version
4MByte flash memory
In breadboard-friendly breakout
USB micro B for power and Serial communication, use to load program and serial debugging
ESP-WROOM-32 WIFI Bluetooth Networking Smart Component Development Board-30 Pins
In stock
₹355.00 (Incl. GST)Specifications:
Ultra-low-power management.
4 MB Flash.
Current: 80 mA.
Supply Voltage: 3.0 V ~ 3.6 V.
Data Rate: 150 Mbps.
Frequency: 2.4 GHz.
ESP32 (38 Pin) WiFi + Bluetooth NodeMCU-32 Development Board
In stock
₹450.00 (Incl. GST)ESP32 Development board is based on the ESP WROOM32 WIFI + BLE
Module.It’s a low-footprint, minimal system development board powered by
the latest ESP-WROOM-32 module and can be easily inserted into a
solderless breadboard.
It contains the entire basic support circuitry for the ESP-WROOM-32,
including the USB-UART bridge, reset- and boot-mode buttons, LDO
regulator and a micro-USB connector. Every important GPIO is available
ESP32-CAM WiFi + bluetooth Camera Module Development Board ESP32 With Camera Module OV2640
In stock
Original price was: ₹665.00.₹650.00Current price is: ₹650.00. (Incl. GST)Specifications:
Power Supply Range: 3.6V to 5V
Bluetooth: 4.2 BR / EDR and BLE standards
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Custom IO Port: 9
Low-power dual-core 32-bit CPU for application processors
RAM: 520KB SRAM +4M PSRAM
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
UART Baudrate: Default 115200 bps
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Operating Temperature (°C): -20 to 80
Support OV2640 and OV7670 cameras with built-in flash
Support for images WiFI upload
Support TF card
NEO-M8N GPS Module with Ceramic Active Antenna
In stock
₹899.00 (Incl. GST)Specifications:
Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm.
Module Size : approx. 26 x 36 x 4 (LxWxH) mm.
Net weight : approx. 16 gm.
Gross weight : approx. 17 gm.
Mounting : approx. 3 mm.
The default baud rate : 9600.
U-blox NEO-6M GPS Module with EPROM
In stock
₹259.00 (Incl. GST)Specifications:
Standalone GPS receiver
Anti-jamming technology
UART Interface at the output pins (Can use SPI ,I2C and USB by soldering pins to the chip core)
Under 1 second time-to-first-fix for hot and aided starts
Receiver type: 50 Channels – GPS L1 frequency – SBAS (WAAS, EGNOS, MSAS, GAGAN)
Time-To-First-fix: For Cold Start 32s, For Warm Start 23s, For Hot Start <1s
Maximum navigation update rate: 5Hz
Default baud rate: 9600bps
EEPROM with battery backup
Sensitivity: -160dBm
Supply voltage: 3.6V
Maximum DC current at any output: 10mA
Operation limits: Gravity-4g, Altitude-50000m, Velocity-500m/s
Operating temperature range: -40ºC TO 85°C