Showing 1–12 of 143 results
Shop
125 KHZ RFID Keyfob
In stock
₹12.00 (Incl. GST)QUICK OVERVIEW
Material: ABS
Dimension (LxWxH): 39.9×31.9×3.8mm
Response Frequency: 125Khz
Chip type: EM4305
Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
125khz RFID Card Thin (2 Pieces)
In stock
₹15.00 (Incl. GST)Specifications:
Anti-Collision
Data transfer: 106 k bit/s
Data integrity: 16 Bit CRC, parity, bit coding bit counting
Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
Operating frequency: 125KHz
Contactless transmission of data and supply energy (no battery needed)
2.2Inch Flex Sensor
In stock
₹270.00 (Incl. GST)Specifications:
Operating voltage of FLEX SENSOR: 0-5V
Can operate on LOW voltages
Power rating : 0.5Watt (continuous), 1 Watt (peak)
Life: 1 million
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Bend Resistance Range: 45K to 125K Ohms(depending on bend)
Compatiable with Arduino
2.54 mm 2×40 Pin Female Double Row Header Strip
In stock
₹20.00 (Incl. GST)QUICK OVERVIEW
Double row.
2.54mm pitch.
2 x 40 pins.
Through-hole mount.
2.54mm 1×40 Pin Female Single Row Header Strip
In stock
₹8.00 (Incl. GST)Specifications:
Single row.
2.54mm pitch.
1 x 40 pins.
Through-hole mount.
2.54mm High Quality 1*40pin Straight Single Row Round Pin Header
In stock
₹8.00 (Incl. GST)Specifications:
Pins: 40
Pin Spacing: 2.54mm
Weight: 15 gm.
2.54mm pitch 40×2 Pin Height Male Double Row Straight Long Header Burg Strip
In stock
₹20.00 (Incl. GST)Specifications:
Double row.
2.54mm pitch.
2 x 40 pins.
Through-hole mount.
2mm 1×40 Pin Male Single Row Header Strip
In stock
₹12.00 (Incl. GST)Specifications:
Single row.
2mm pitch.
1 x 40 pins.
Through-hole mount.
2mm Pitch 40×1 Female Berg Strip
In stock
₹12.00 (Incl. GST)Specifications and Features:
Number of Pins: 40.
Pin Spacing(pitch): 2 mm.
Strip Length: 80.60 mm.
Strip width : 2.49 mm.
Strip Height: 4.4 mm(Only Plastic Part).
Strip Height: 6.8 mm (with contact Points).
Pin height: 2.2mm.
3.3V/5V MB102 Breadboard Power Supply Module
In stock
₹60.00 (Incl. GST)Specifications:
Compatible with 5V, 3.3V.
Input Voltage :6.5-12V (DC) or USB power.
Output voltage: 3.3V, 5V switchable.
Maximum Output Current: <700ma.
Two-way independent control.
Can be switched to 0V, 3.3V, 5V.
On-board Two sets of 3.3V, 5V DC output pins, Facilitate the external leads.
4X4 Matrix Membrane Keypad
In stock
₹40.00 (Incl. GST)Specifications:
Operating Voltage (V): 12 DC
Operating temperature: 32 to 122 °F
Maximum Rating: 24 VDC, 30 mA
Keypad Dimensions: 6.9 cm X 7.9 cm
Cable dimensions: 2.0 cm X 8.8 cm
Maximum rating: 24 VDC, 30 mA
Pin counts: 8
Compatible with: Arduino, controller, processor etc
5.5 x 2.1mm Female DC Power Jack PCB Mount
In stock
₹10.00 (Incl. GST)Specification:
Plug Type: 5.5 x 2.1mm
Rating : DC 30V 3A
Insulation Resistance : ≥100MΩ (DC250V)
Insertion And Extraction Force : 3 – 20N