Showing 1–12 of 141 results
Shop
0.91 inch IIC 4-Pin OLED Display Module SSD1306 – White
In stock
₹185.00 (Incl. GST)Specifications:
Size: 0.91 inch
Resolution: 128 x 32
Controlling Chip: SSD1306
Display Area: 22.384 x 5.584mm
Driving Voltage: 3-5V
Operating Temperature: -40~70 celsius
Interface Type: IIC
Light Color: White
0.96inch 128×64 OLED 4 Pin Display Module Arduino Compatible (Blue)
In stock
₹169.00 (Incl. GST)Specifications:
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Mini Size: 2.7 x 2.8cm
Only Need 2 I/O Port Control
Full Compatible with Arduino
Working temperature: -30°C ~ 70°C
Module volume: 32 x 35.5 x 4mm
1.3 Inch IIC 128×64 OLED Display Module 4 Pin – Blue
In stock
₹289.00 (Incl. GST)Specifications:
Display Colour: Blue
Resolution : 128×48 pixels
Driver IC: SH1106
Fully Compatible with Arduino
Working temperature: -30°C ~ 70°C
Factory configured for SPI protocol (can be easily changed to IIC)
Please note: Product Images are shown for illustrative purposes only and may differ from actual product.
125 KHZ RFID Keyfob
In stock
₹12.00 (Incl. GST)QUICK OVERVIEW
Material: ABS
Dimension (LxWxH): 39.9×31.9×3.8mm
Response Frequency: 125Khz
Chip type: EM4305
Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
125khz RFID Card Thin (2 Pieces)
In stock
₹15.00 (Incl. GST)Specifications:
Anti-Collision
Data transfer: 106 k bit/s
Data integrity: 16 Bit CRC, parity, bit coding bit counting
Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
Operating frequency: 125KHz
Contactless transmission of data and supply energy (no battery needed)
128×64 LCD Green/Yellow
In stock
₹706.00 (Incl. GST)Specifications:
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Pixel Color: Yellow/Green
16×2 Character LCD Display With Yellow Backlight
In stock
₹106.00 (Incl. GST)Specifications:
Model: LCD1602
Character Color: Black
Backlight: Yellow
Supply voltage: 5V
Dimensions (L x W x H) mm. : 80 x 36 x 10
16×2 LCD Yellow-Green with I2C Module
In stock
₹169.00 (Incl. GST)Specifications:
Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
I2C adapter allows flexibility in connections
I2C Reduces the overall wirings.
16 characters wide, 2 rows
White text on the Blue background
Single LED backlight included can be dimmed easily with a resistor or PWM.
Interface: I2C
Interface Address: 0x27
Character Color: White
Backlight: Blue
Supply voltage: 5V
2.2Inch Flex Sensor
In stock
₹270.00 (Incl. GST)Specifications:
Operating voltage of FLEX SENSOR: 0-5V
Can operate on LOW voltages
Power rating : 0.5Watt (continuous), 1 Watt (peak)
Life: 1 million
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Bend Resistance Range: 45K to 125K Ohms(depending on bend)
Compatiable with Arduino
2.4 Inch TFT Touch Screen Module for UNO R3 Blue
In stock
₹823.00 (Incl. GST)Specifications:
Input voltage (V) : 3.3
Screen size ( inches) : 2.4
Screen Resolution : 240 x 320
Screen colour : 65 k
Touch Type : Resistive
Length (mm) : 40
Width (mm) : 56
Height (mm) : 12
Weight (gm) : 35
Shipment Weight : 0.037 kg
Shipment Dimensions : 8 × 6 × 2 cm
2.4 inch Touch TFT LCD Arduino Shield With Pen
In stock
₹564.00 (Incl. GST)Specifications:
2.4″ diagonal Touch LCD TFT display
240×320 resolution, 18-bit (262,000) color
8-bit digital interface, plus 4 control lines
Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3, and analog 4 and 5. Pin 12 is available if not using the microSD
Works with any Arduino UNO
5V compatible! Use with 3.3V or 5V logic
4 white LED backlights. By default but you can connect the transistor to a digital pin for backlight control
Onboard 3.3V 300mA LDO regulator
3.3V/5V MB102 Breadboard Power Supply Module
In stock
₹60.00 (Incl. GST)Specifications:
Compatible with 5V, 3.3V.
Input Voltage :6.5-12V (DC) or USB power.
Output voltage: 3.3V, 5V switchable.
Maximum Output Current: <700ma.
Two-way independent control.
Can be switched to 0V, 3.3V, 5V.
On-board Two sets of 3.3V, 5V DC output pins, Facilitate the external leads.