Showing 1–12 of 132 results
Shop
100MM, 15mm/S, 64N, 12V Mini Linear Actuator
In stock
₹3,149.00 (Incl. GST)Description
is compact mini linear actuator offers a 100mm stroke, delivering precise motion at a speed of 15mm/s. With a force capacity of 64N, it is ideal for small-scale automation projects where space is limited but reliability is crucial. Operating on a 12V DC power supply, it is suitable for a variety of applications, including robotics, medical devices, and home automation.
Features:
Stroke Length: 100mm
Speed: 15mm/s for smooth and controlled movement
Force: 64N, providing reliable lifting and pushing power
Voltage: 12V DC for efficient energy consumption
Compact Design: Ideal for applications with limited space
Durability: Built to last with high-quality materials
125 KHZ RFID Keyfob
In stock
₹12.00 (Incl. GST)QUICK OVERVIEW
Material: ABS
Dimension (LxWxH): 39.9×31.9×3.8mm
Response Frequency: 125Khz
Chip type: EM4305
Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
125khz RFID Card Thin (2 Pieces)
In stock
₹15.00 (Incl. GST)Specifications:
Anti-Collision
Data transfer: 106 k bit/s
Data integrity: 16 Bit CRC, parity, bit coding bit counting
Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
Operating frequency: 125KHz
Contactless transmission of data and supply energy (no battery needed)
150MM, 15mm/S, 64N, 6V Mini Linear Actuator
In stock
₹3,600.00 (Incl. GST)Specifications:
Input Voltage: 6V DC
Stroke Length: 150mm
Speed: 15mm/s
Max Load Capacity: 64N
Duty Cycle: 25% (max 1 minute continuous use, 3 minutes rest)
Operating Temperature: -20°C to +65°C
Protection Class: IP54 (resistant to dust and splashing water)
Connection: 2-wire configuration for easy installation
2.2Inch Flex Sensor
In stock
₹270.00 (Incl. GST)Specifications:
Operating voltage of FLEX SENSOR: 0-5V
Can operate on LOW voltages
Power rating : 0.5Watt (continuous), 1 Watt (peak)
Life: 1 million
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Bend Resistance Range: 45K to 125K Ohms(depending on bend)
Compatiable with Arduino
3.3V/5V MB102 Breadboard Power Supply Module
In stock
₹60.00 (Incl. GST)Specifications:
Compatible with 5V, 3.3V.
Input Voltage :6.5-12V (DC) or USB power.
Output voltage: 3.3V, 5V switchable.
Maximum Output Current: <700ma.
Two-way independent control.
Can be switched to 0V, 3.3V, 5V.
On-board Two sets of 3.3V, 5V DC output pins, Facilitate the external leads.
30MM, 15mm/S, 64N, 6V Mini Linear Actuator
In stock
₹2,500.00 (Incl. GST)Specifications:
Input Voltage: 6V DC
Stroke Length: 30mm
Speed: 15mm/s
Max Load Capacity: 64N
Duty Cycle: 25% (max 1 minute continuous use, 3 minutes rest)
Operating Temperature: -20°C to +65°C
Protection Class: IP54 (resistant to dust and splashing water)
Connection: 2-wire configuration for easy installation
4X4 Matrix Membrane Keypad
In stock
₹40.00 (Incl. GST)Specifications:
Operating Voltage (V): 12 DC
Operating temperature: 32 to 122 °F
Maximum Rating: 24 VDC, 30 mA
Keypad Dimensions: 6.9 cm X 7.9 cm
Cable dimensions: 2.0 cm X 8.8 cm
Maximum rating: 24 VDC, 30 mA
Pin counts: 8
Compatible with: Arduino, controller, processor etc
50MM, 15mm/S, 64N, 6V Mini Linear Actuator
In stock
₹2,708.00 (Incl. GST)Specifications:
Input Voltage: 6V DC
Stroke Length: 50mm
Speed: 15mm/s
Max Load Capacity: 64N
Duty Cycle: 25% (max 1 minute continuous use, 3 minutes rest)
Operating Temperature: -20°C to +65°C
Protection Class: IP54 (resistant to dust and splashing water)
Connection: 2-wire configuration for easy installation
650nm 6mm 5V DC 5mW Mini Laser Dot Diode
In stock
₹20.00 (Incl. GST)Overview
Output Power: 5mW
Working Voltage: 5V DC
Working temperature: -10 ℃~＋40 ℃
Housing material: Copper
Working life: more than 2000 hours
Spot mode: Dot Facula (continuous output)
Laser wavelength: 650nm red-colored
Operating current: <40mA
Power lead length: 120mm
8 Way Tracking Lines Follower Module Infrared Detection
In stock
₹350.00 (Incl. GST)Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 digital I/O-compatible signals that can be read as a timed high pulse
Optimal sensing distance: 0.125″ (3 mm)
8 Way Tracking Lines Follower Module Infrared Detection
A3144 Hall Effect Sensor Magnet Detector Switch for Arduino
In stock
₹36.00 (Incl. GST)Features:
Digital Output Hall-effect sensor.
Operating voltage: typically5V.
Output Current: 25mA.
It can be used to detect both the poles of a magnet.
The output voltage is equal to the operating voltage.
Operating temperature: -40°C to 85°C.
Turn on and Turn off time is 2 μsec each.
Inbuilt reverse polarity protection.
Suitable for Automotive and Industrial Applications.