Showing 1–12 of 140 results
Shop
1 Channel 12V Low Level Trigger Relay Module for Arduino
In stock
₹70.00 (Incl. GST)Specifications
250VAC 10A, 28VDC 10A
Indicator LEDs
12V control voltage
Module size: 43mm x 17mm
125 KHZ RFID Keyfob
In stock
₹12.00 (Incl. GST)QUICK OVERVIEW
Material: ABS
Dimension (LxWxH): 39.9×31.9×3.8mm
Response Frequency: 125Khz
Chip type: EM4305
Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
125khz RFID Card Thin (2 Pieces)
In stock
₹15.00 (Incl. GST)Specifications:
Anti-Collision
Data transfer: 106 k bit/s
Data integrity: 16 Bit CRC, parity, bit coding bit counting
Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
Operating frequency: 125KHz
Contactless transmission of data and supply energy (no battery needed)
12V Sugar Cube Relay
In stock
₹25.00 (Incl. GST)Specification:
Product type: SPDT sugar cube relay
Voltage: 12v
Number of pins: 5
Pin type: through hole
Package contains: 1 X sugar cube SPDT relay switch
2.2Inch Flex Sensor
In stock
₹270.00 (Incl. GST)Specifications:
Operating voltage of FLEX SENSOR: 0-5V
Can operate on LOW voltages
Power rating : 0.5Watt (continuous), 1 Watt (peak)
Life: 1 million
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Bend Resistance Range: 45K to 125K Ohms(depending on bend)
Compatiable with Arduino
3.3V/5V MB102 Breadboard Power Supply Module
In stock
₹60.00 (Incl. GST)Specifications:
Compatible with 5V, 3.3V.
Input Voltage :6.5-12V (DC) or USB power.
Output voltage: 3.3V, 5V switchable.
Maximum Output Current: <700ma.
Two-way independent control.
Can be switched to 0V, 3.3V, 5V.
On-board Two sets of 3.3V, 5V DC output pins, Facilitate the external leads.
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In stock
₹542.00 (Incl. GST)Specifications
Module Type: 4 Channel Solid State Relay
Control Voltage (Input): 5V DC
Control Signal Current: 5–12 mA per channel
Load Voltage (Output): 100–240V AC
Load Current (Output): Up to 2A per channel
Trigger Voltage: 0–2.5V (Low), 3–5V (High)
Isolation: Opto-isolated inputs for protection
Dimensions: ~ 73mm × 55mm × 25mm
4X4 Matrix Membrane Keypad
In stock
₹40.00 (Incl. GST)Specifications:
Operating Voltage (V): 12 DC
Operating temperature: 32 to 122 °F
Maximum Rating: 24 VDC, 30 mA
Keypad Dimensions: 6.9 cm X 7.9 cm
Cable dimensions: 2.0 cm X 8.8 cm
Maximum rating: 24 VDC, 30 mA
Pin counts: 8
Compatible with: Arduino, controller, processor etc
5V 1 Channel Relay Module
In stock
₹45.00 (Incl. GST)Specification
Trigger Voltage: 5 VDC
Trigger Current : 20 mA
Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
Single Pole Double Throw (SPDT) Configuration
Power supply indicator lamp
5V 1 Channel Relay Module (with Optocoupler)
In stock
₹68.00 (Incl. GST)Features
Operating Voltage(VDC) : 5V
Max. Current(mA) : 0.20 mA
Current Capacity : 10A
Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
5V 2Channel Relay Module (with Optocoupler)
In stock
₹72.00 (Incl. GST)Features
High current relay, AC250V 10A, D 30V 10A
2 LEDs to indicate when relays are on
Supply voltage – 3.75V to 6V
Trigger current – 5mA
Current when relay is active – ~70mA (single), ~140mA (both)
Relay maximum contact voltage – 250VAC, 30VDC
Relay maximum current – 10A
Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
5V 4 Channel Relay Module (with Optocoupler)
In stock
₹135.00 (Incl. GST)Specifications:
1. Supply voltage – 3.75V to 6V
2. Trigger current – 5mA
3. Current when the relay is active – ~70mA (single), ~300mA (all four)
4. Relay maximum contact voltage – 250VAC, 30VDC
5. Relay maximum current – 10A
6. Triode drive, increasing relay coil
7. High impedance controller pin
8. Pull-down circuit for avoidance of malfunction
9. Power supply indicator and Control indicator lamp
10. Power supply and relay instructions, lit, disconnect is off
11. Input signal, signal, common Terminal and start conducting
12. Useful for appliance control
13. DC or AC signal, control, you can control the 220V AC load