Showing 1–12 of 129 results
Shop
125 KHZ RFID Keyfob
In stock
₹12.00 (Incl. GST)QUICK OVERVIEW
Material: ABS
Dimension (LxWxH): 39.9×31.9×3.8mm
Response Frequency: 125Khz
Chip type: EM4305
Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
125khz RFID Card Thin (2 Pieces)
In stock
₹15.00 (Incl. GST)Specifications:
Anti-Collision
Data transfer: 106 k bit/s
Data integrity: 16 Bit CRC, parity, bit coding bit counting
Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
Operating frequency: 125KHz
Contactless transmission of data and supply energy (no battery needed)
2.2Inch Flex Sensor
In stock
₹270.00 (Incl. GST)Specifications:
Operating voltage of FLEX SENSOR: 0-5V
Can operate on LOW voltages
Power rating : 0.5Watt (continuous), 1 Watt (peak)
Life: 1 million
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Bend Resistance Range: 45K to 125K Ohms(depending on bend)
Compatiable with Arduino
3.3V/5V MB102 Breadboard Power Supply Module
In stock
₹60.00 (Incl. GST)Specifications:
Compatible with 5V, 3.3V.
Input Voltage :6.5-12V (DC) or USB power.
Output voltage: 3.3V, 5V switchable.
Maximum Output Current: <700ma.
Two-way independent control.
Can be switched to 0V, 3.3V, 5V.
On-board Two sets of 3.3V, 5V DC output pins, Facilitate the external leads.
4X4 Matrix Membrane Keypad
In stock
₹40.00 (Incl. GST)Specifications:
Operating Voltage (V): 12 DC
Operating temperature: 32 to 122 °F
Maximum Rating: 24 VDC, 30 mA
Keypad Dimensions: 6.9 cm X 7.9 cm
Cable dimensions: 2.0 cm X 8.8 cm
Maximum rating: 24 VDC, 30 mA
Pin counts: 8
Compatible with: Arduino, controller, processor etc
650nm 6mm 5V DC 5mW Mini Laser Dot Diode
In stock
₹20.00 (Incl. GST)Overview
Output Power: 5mW
Working Voltage: 5V DC
Working temperature: -10 ℃~＋40 ℃
Housing material: Copper
Working life: more than 2000 hours
Spot mode: Dot Facula (continuous output)
Laser wavelength: 650nm red-colored
Operating current: <40mA
Power lead length: 120mm
8 Way Tracking Lines Follower Module Infrared Detection
In stock
₹350.00 (Incl. GST)Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 digital I/O-compatible signals that can be read as a timed high pulse
Optimal sensing distance: 0.125″ (3 mm)
8 Way Tracking Lines Follower Module Infrared Detection
A3144 Hall Effect Sensor Magnet Detector Switch for Arduino
In stock
₹36.00 (Incl. GST)Features:
Digital Output Hall-effect sensor.
Operating voltage: typically5V.
Output Current: 25mA.
It can be used to detect both the poles of a magnet.
The output voltage is equal to the operating voltage.
Operating temperature: -40°C to 85°C.
Turn on and Turn off time is 2 μsec each.
Inbuilt reverse polarity protection.
Suitable for Automotive and Industrial Applications.
ACS712 20AMP Ac/DC Current Sensor
In stock
₹106.00 (Incl. GST)Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -20A ~ 20A
Sensitivity: 100mV/A
Low-noise analog signal path.
Power-On Time: 35us
5 µs output rise time in response to step input current.
Small footprint, low-profile SOIC8 package.
ACS712 30AMP Ac/DC Current Sensor
In stock
₹86.00 (Incl. GST)Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -30A ~ 30A
Sensitivity: 100mV/A
Low-noise analog signal path.
Power-On Time: 35us
5 µs output rise time in response to step input current.
Small footprint, low-profile SOIC8 package.
ACS712 Current Sensor 5A
In stock
₹100.00 (Incl. GST)Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -5A ~ 5A
Sensitivity: 180mV/A ~190mV/A, Typical: 185mV/A
Low-noise analog signal path.
Device bandwidth is set via the new FILTER pin.
5 µs output rise time in response to step input current.
Small footprint, low-profile SOIC8 package.
AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
In stock
₹450.00 (Incl. GST)Specifications:
Fully integrated single-lead ECG front end
Common-mode rejection ratio: 80 dB (dc to 60 Hz)
Two or three-electrode configurations
Qualified for automotive application
Single-supply operation: 2.0 V to 3.5
Fast restore feature improves filter settling