Shop

100A Current Sensor SCT013 Non-Invasive Ac Current Split Core Type Clamp Meter Sensor

In stock

363.00 (Incl. GST)

Specifications:

Input Current : 100A
Frequency: 50HZ-150KHZ
Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
Output Plug 3.5mm
Dielectric Strength 6000V AC/1min
Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection

125 KHZ RFID Keyfob

SKU: S-068b

In stock

12.00 (Incl. GST)

QUICK OVERVIEW

Material: ABS
Dimension (LxWxH): 39.9×31.9×3.8mm
Response Frequency: 125Khz
Chip type: EM4305
Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.

125khz RFID Card Thin (2 Pieces)

SKU: S-068a

In stock

15.00 (Incl. GST)

Specifications:

Anti-Collision
Data transfer: 106 k bit/s
Data integrity: 16 Bit CRC, parity, bit coding bit counting
Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
Operating frequency: 125KHz
Contactless transmission of data and supply energy (no battery needed)

14 PIN MALE BOXHEADER

In stock

14.00 (Incl. GST)

14 Pin Box Header Male Straight
Arrangement: 7 x 2 pins
Pitch: 2.54 mm
Current Rating: 3 A max
Working Voltage: 250V AC

2.2Inch Flex Sensor

SKU: S-055

In stock

270.00 (Incl. GST)

Specifications:

Operating voltage of FLEX SENSOR: 0-5V
Can operate on LOW voltages
Power rating : 0.5Watt (continuous), 1 Watt (peak)
Life: 1 million
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Bend Resistance Range: 45K to 125K Ohms(depending on bend)
Compatiable with Arduino

3.3V/5V MB102 Breadboard Power Supply Module

SKU: S-069

In stock

60.00 (Incl. GST)

Specifications:

Compatible with 5V, 3.3V.
Input Voltage :6.5-12V (DC) or USB power.
Output voltage: 3.3V, 5V switchable.
Maximum Output Current: <700ma.
Two-way independent control.
Can be switched to 0V, 3.3V, 5V.
On-board Two sets of 3.3V, 5V DC output pins, Facilitate the external leads.

41F Hall Effect Sensor &ndash Magnetic Proximity Switch

In stock

20.00 (Incl. GST)

Operating Voltage: 3V – 24V DC (typical)

Output Type: Digital (ON/OFF switching)

Current Consumption: < 10 mA (typical)

Output Current: up to 20 mA

Response Time: ≤ 1 µs (fast switching)

Operating Frequency: up to 100 kHz

4X4 Matrix Membrane Keypad

SKU: SB-130

In stock

40.00 (Incl. GST)

Specifications:

Operating Voltage (V): 12 DC
Operating temperature: 32 to 122 °F
Maximum Rating: 24 VDC, 30 mA
Keypad Dimensions: 6.9 cm X 7.9 cm
Cable dimensions: 2.0 cm X 8.8 cm
Maximum rating: 24 VDC, 30 mA
Pin counts: 8
Compatible with: Arduino, controller, processor etc

650nm 6mm 5V DC 5mW Mini Laser Dot Diode

SKU: S-054b

In stock

20.00 (Incl. GST)

Overview

Output Power: 5mW
Working Voltage: 5V DC
Working temperature: -10 ℃~+40 ℃
Housing material: Copper
Working life: more than 2000 hours
Spot mode: Dot Facula (continuous output)
Laser wavelength: 650nm red-colored
Operating current: <40mA
Power lead length: 120mm

6DOF Robotic Arm- Full metal DIY Robotic arm Kit without Servos

In stock

3,500.00 (Incl. GST)

Specifications
Item Type: Mechanical Arm (Frame Kit Only)

Color: Black

Machine Torsion (Supported): 10kg.cm

Limit Angle: 180°

Wire Length (Supported Servos): 30cm

Gear Material: Metal

Dead Time: 5µs

Steering Gear Performance: General

7483 4-bit Binary Full Adder Ic 74LS83

SKU: D015

Out of stock

147.00 (Incl. GST)

Specifications:
4-bit Full Adder with Carry Out
Nominal Operating Voltage: 5V
Maximum Operating Voltage: 5.5V
Output Propagation delay: 16nS
Maximum Input Low Voltage: 0.8V
Minimum Input High Voltage: 2V
Available in 16-pin PDIP, CDIP,SOIC, TSSOP packages

7Semi BNO055 9-DOF Absolute Orientation Sensor Breakout I2C Qwiic

SKU: S-186

Available on backorder

1,350.00 (Incl. GST)