Showing 1–12 of 22 results
Shop
1 Channel 12V Low Level Trigger Relay Module for Arduino
In stock
₹70.00 (Incl. GST)Specifications
250VAC 10A, 28VDC 10A
Indicator LEDs
12V control voltage
Module size: 43mm x 17mm
1 channel 5V 10A Relay Control Board Module with Optocoupler
In stock
₹62.00 (Incl. GST)Specifications:
Channel: 1 channel
Relay Voltage: 5V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
12V 4 Channel Relay Module (with Optocoupler)
In stock
₹190.00 (Incl. GST)Features :
This Board can be used to Control Solenoids, Motors, Lamps, etc,
Input Logic: 12v level from MUC
Indication LEDs for relay output status.• 12V 4-Channel relay board controlled directly by micro-controller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) need 50-60mA driver current
Input IN1, IN2, IN3, IN4 signal line active low, 4-channel relay output module, relay output contact is maximum 250A 10A
Input Pin connected to Burg stick. High-current, AC250V 10A, DC30V 10A.
12V 8 Channel Relay Module (with Optocoupler)
In stock
₹402.00 (Incl. GST)Specifications:
Operating Voltage: 12V DC
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
A freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED status indicators to indicate the relay ON/OFF status
Mounting holes provided
12V Sugar Cube Relay
In stock
₹25.00 (Incl. GST)Specification:
Product type: SPDT sugar cube relay
Voltage: 12v
Number of pins: 5
Pin type: through hole
Package contains: 1 X sugar cube SPDT relay switch
2 Channel 12V Low Level Trigger Relay Module for Arduino
In stock
₹81.00 (Incl. GST)-
Module Type: Relay Module
-
Number of Channels: 2 Channel
-
Operating Voltage: 12V DC
-
Relay Type: Electromechanical Relay
24V 10A Sugar Cube Relay
In stock
₹25.00 (Incl. GST)Specification:
Product type: SPDT sugar cube relay
Voltage: 24v
Number of pins: 5
Pin type: through hole
Package contains: 2 X sugar cube SPDT relay switch
24V 4-Channel Relay Module (with Light Coupling)
In stock
₹156.00 (Incl. GST)Specifications:
Operating Voltage: 24V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
Mounting holes provided
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In stock
₹542.00 (Incl. GST)Specifications
Module Type: 4 Channel Solid State Relay
Control Voltage (Input): 5V DC
Control Signal Current: 5–12 mA per channel
Load Voltage (Output): 100–240V AC
Load Current (Output): Up to 2A per channel
Trigger Voltage: 0–2.5V (Low), 3–5V (High)
Isolation: Opto-isolated inputs for protection
Dimensions: ~ 73mm × 55mm × 25mm
5V 1 Channel Relay Module
In stock
₹45.00 (Incl. GST)Specification
Trigger Voltage: 5 VDC
Trigger Current : 20 mA
Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
Single Pole Double Throw (SPDT) Configuration
Power supply indicator lamp
5V 1 Channel Single Relay Module 30A Power Failure Relay
In stock
₹153.00 (Incl. GST)Specifications:
Voltage version: 5V
The static current: 5mA
Working current: 190mA
Trigger current: 2-4mA
The module can be set high level or low-level trigger by the jumper
Rated current of the interface is 16A
5V 2Channel Relay Module (with Optocoupler)
In stock
₹90.00 (Incl. GST)Features
High current relay, AC250V 10A, D 30V 10A
2 LEDs to indicate when relays are on
Supply voltage – 3.75V to 6V
Trigger current – 5mA
Current when relay is active – ~70mA (single), ~140mA (both)
Relay maximum contact voltage – 250VAC, 30VDC
Relay maximum current – 10A
Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)