RS232 To TTL Serial Converter Module
In stock
₹55.00 (Incl. GST)Specifications:
IC Chip: MAX3232
Operating Voltage: 3.3-5.5V
Operates up to 250 kbit/s
Power supply: external dc
interface: TXD, RXD, GND, VCC
Dimensions: 33mm*32mm*16mm
SanDisk Micro SDXC USH-I 64GB Class 10 Memory Card
In stock
₹1,111.00 (Incl. GST)It has a memory size of 64GB
It has a data transfer rate of 98Mb/sec.
It is a Class 10 micro SD card.
The high speed SD Card is compatible with mobile phones and even Raspberry pi.
It has 5 years of manufacturing defect Warranty given by SanDisk.
The SD card does not come with pre-installed NOOBS. If you want the SD card to be installed with NOOBS, then select the OS given in the drop down.
SanDisk Ultra Micro SD 32GB UHS-I, 120MB/s R , Class 10 Memory Card
In stock
₹826.00 (Incl. GST)- SanDisk 32GB Memory Card
- Card Type: Ultra Micro SD
- Speed: up to 98MB/s
- Class: 10
- High-speed Card can be used for both Mobile phone and Raspberry Pi
- 5 years of manufacturing defect Warranty Given by Sandisk.
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
In stock
Original price was: ₹421.00.₹399.00Current price is: ₹399.00. (Incl. GST)Features:
5V power supplied by a USB connector
USB 2.0 full speed compatible interface
USB standard A to mini B cable
1.65V to 5.5V application voltage supported on SWIM interface
SWIM low speed and high-speed modes supported
STM32F103C8T6 Minimum System Board Micro-computer STM32 ARM Core Board
In stock
₹180.00 (Incl. GST)Specifications:
2.0-3.6V power, I/O.
Operating voltage:3.3V
Analog inputs:10
Digital I/O pins:37
DC source/sink from I/O pins:6mA
Flash memory (KB):64/128
SRAM:20KB
Frequency (clock speed):72MHz max.
Communication:I2C, SPI, UART, CAN, USB
STM32F401CCU6 Minimum System Board Microcomputer STM32 ARM Core Board
Out of stock
₹304.00 (Incl. GST)Specifications:
Item Type: Other Board
Based On: STM32 Based
USB Connector: Type-C
Length (mm): 53
Width (mm): 20
Height (mm): 5
Weight (g): 7
STM32F411CEU6 Minimum System Board Microcomputer STM32 ARM Core Board
Out of stock
Original price was: ₹520.00.₹299.00Current price is: ₹299.00. (Incl. GST)100% Brand new and high-quality STM32 Board
Model: STM32F411CEU6
Core: ARM 32 Cortex-M4 CPU.
Debug mode: SWD.
72MHz work frequency.
512K flash memory, 128K SRAM.
TJA1050 CAN Controller Bus Driver Interface Module
In stock
₹77.00 (Incl. GST)Features :
Onboard TJA1050 CAN controller interface chip
Chip commonly used pin has led, convenient connection to use
Pin 5 v to the power supply
PCB board size: 22 (mm) x11.5 (mm)
Fully compatible with the ISO 11898 standard
High speed (up to 1 Mbaud)
Very low Electro-Magnetic Emission (EME)
Differential receiver with wide common-mode range for high Electro-Magnetic Immunity (EMI)
An unpowered node does not disturb the bus lines
Transmit Data (TXD) dominant time-out function
A silent mode in which the transmitter is disabled
Bus pins protected against transients in an automotive environment
Input levels compatible with 3.3 V and 5 V devices
Thermally protected
Short-circuit proof to the battery and to ground
TTL to RS485 Power Supply Converter Board 3.3V 5V Hardware Auto Control Module
In stock
₹95.00 (Incl. GST)Specifications:-
Operating Voltage (VDC):3 ~ 30
Compatible Signals:3.3V and 5.0V
Working Temperature Range (°C):-40 to 85
Baud Rate:110 to 256000bps
Support multi-machine communication, at least 40 nodes can be connected to the same network
can be hot-swapped and there will be no signal thrombosis.
With standard 2.54 pitch pin headers
UNO R3 CH340G ATMega328P compatible with arduino + Cable
In stock
₹280.00 (Incl. GST)A basic Arduino Kit including everything to get started.
It includes a quality proven Arduino Cable.
Microcontroller ATmega328 (SMD) – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Digital I / O Pins 14 (of which 6 provide PWM output)
Analog Input Pins: 6
Uno R3 CH340G ATMega328P Development Board Compatible with Arduino
In stock
₹230.00 (Incl. GST)Specifications:
Microcontroller ATmega328 (SMD) – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 5-20V
Digital I / O Pins 14 (of which 6 provide PWM output)
Analog Input Pins: 6
USB to RS485 Converter Adapter Support WIN7 XP Vista Linux Mac OS
In stock
₹70.00 (Incl. GST)Specifications:
USB to RS485 Converter Adapter
USB connector: to your PC
RS485 connector: to your RS485 device
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side)
Better than using CH341D chip or similar chip to support the laptop USB port
Communication distance up to 1.2KM, with the anti-jamming performance of the industrial site
No need external power, powered by USB port