Showing 1–12 of 19 results
Programmers / Interface Modules
ADS1115 16 Bit I2C ADC Analog to Digital Converter Module
In stock
₹164.00 (Incl. GST)Specifications:
Single-shot mode: automatically turns off
Low current consumption: Continuous mode 150 μA
Wide supply voltage range: 2.0V to 5.5V
Interfacing is done via I2C
Programmable data rate: 8SPS to 860SPS
Low drift internal voltage reference
Internal Oscillator
Internal PGA up to 860 samples per second (SPS)
Four single-ended or two differential inputs (ADS1115)
Operating temperature: -40 ° C to + 140 ° C
Programmable comparator
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
In stock
₹59.00 (Incl. GST)- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Microcomputer with cold start reset button
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software and Driver
In stock
₹234.00 (Incl. GST)Features:
Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
With 24/25 status indicator lamp
Support USB to TTL conversion support 24EEPROM and 25 SPI flash 8pin/ 16pin chip
Recognize 25 series chip automatically
Supports download STC series procedure of single chip
SPI pin to support expanding the utility
STC microcontroller supports a full range of program download
Support expanding the utility by SPI pin
With SOP8 SOP16 to DIP8 converter board
Supports Windows XP, Vista, Win7 and Win8 (32/64bit) system
Provide 5V-3.3V power supply output
CP2102(6-pin) USB 2.0 to TTL UART serial converter
In stock
₹110.00 (Incl. GST)Specifications:
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector.
All handshaking and modem interface signals.
Baud rates: 300 bps to 1 Mbps.
Byte receives buffer; 640 bytes transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Works with existing COM port PC Application
ENC28J60 Ethernet LAN Network SPI Module(10 Pin)
In stock
₹320.00 (Incl. GST)Features:
3.3 V power supply pin.
SPI Interface with Clock Speeds Up to 20 MHz
The board 25MHZ crystal
Fully Compatible with 10/100/1000Base-T Networks
Integrated MAC and 10Base-T PHY
Supports One 10Base-T Port with Automatic Polarity Detection and Correction
Supports Full and Half-Duplex modes
Programmable Automatic Retransmit on Collision
SPI Interface with Clock Speeds Up to 20 MHz
For Arduino, SPI, AVR, PIC, LPC, STM32.
MAX485 TTL To RS485
In stock
Original price was: ₹30.00.₹25.00Current price is: ₹25.00. (Incl. GST)Specifications :
Operating voltage: 5V
On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
A low power consumption for the RS-485 communication
Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
All pins of the chip have been lead to can be controlled through the microcontroller.
Convenient RS-485 communication wiring
Multiple Units can be connected to the same RS-485 bus wiring.
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
In stock
₹91.00 (Incl. GST)Specifications :
Input Supply voltage: 5V
Input Supply Current: 5 mA
Communication Rate: 1 Mbps
Support CAN V2.0B technical standard, communication rate 1Mb / S.
0 to 8 bytes long data field.
Use High-speed CAN transceiver TJA1050
SPI control for expanding Multi CAN bus interface
Use serial port could view the communication data
With the independent key, LED indicator, Power indicator
With power pin
Positioning screw hole center spacing 23 mm x 38 mm
The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
PCF8574 IO Expansion Board
In stock
₹80.00 (Incl. GST)Specifications:
8-Bit I/O Expander For I2C-Bus
PCF8574 On Board
PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial
In stock
₹103.00 (Incl. GST)Specifications:
Built-in TTL COM PC-PL2303HX Chip.
Standard USB type and TTL 4 pin connector
Simple and Easy way to give USB support to your designs
Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
Cable Length: 1Meter
Weight: 30gm
PL2303 USB To TTL(Serial) Converter Module
In stock
₹75.00 (Incl. GST)Specifications :
Adopt imported controller PL2303HX, which can stabilize the flash with high speed
500mA self-recovery fuse for protection.
Two data transmission indicator can monitor data transfer status in real time.
Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power.
The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside.
The electrostatic package ensures the board will not be damaged before use.
Support WIN7 system.
RS232 To TTL Serial Converter Module
In stock
₹55.00 (Incl. GST)Specifications:
IC Chip: MAX3232
Operating Voltage: 3.3-5.5V
Operates up to 250 kbit/s
Power supply: external dc
interface: TXD, RXD, GND, VCC
Dimensions: 33mm*32mm*16mm
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
In stock
Original price was: ₹421.00.₹399.00Current price is: ₹399.00. (Incl. GST)Features:
5V power supplied by a USB connector
USB 2.0 full speed compatible interface
USB standard A to mini B cable
1.65V to 5.5V application voltage supported on SWIM interface
SWIM low speed and high-speed modes supported