Filter by brands
1 Channel 12V Low Level Trigger Relay Module for Arduino
In stock
₹70.00 (Incl. GST)Specifications
250VAC 10A, 28VDC 10A
Indicator LEDs
12V control voltage
Module size: 43mm x 17mm
1 Channel 12V Low Level Trigger Relay Module for Arduino
In stock
₹70.00 (Incl. GST)Specifications
250VAC 10A, 28VDC 10A
Indicator LEDs
12V control voltage
Module size: 43mm x 17mm
1 channel 5V 10A Relay Control Board Module with Optocoupler
In stock
₹62.00 (Incl. GST)Specifications:
Channel: 1 channel
Relay Voltage: 5V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator
In stock
₹78.00 (Incl. GST)Specifications:
Voltage range: DC6V – 28V
Current range: Within 3A
Switch function: None
Speed range: 0-100%
Dimension: 65 x 30 x 15mm
Weight: 25 g
12V 4 Channel Relay Module (with Optocoupler)
In stock
₹190.00 (Incl. GST)Features :
This Board can be used to Control Solenoids, Motors, Lamps, etc,
Input Logic: 12v level from MUC
Indication LEDs for relay output status.• 12V 4-Channel relay board controlled directly by micro-controller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) need 50-60mA driver current
Input IN1, IN2, IN3, IN4 signal line active low, 4-channel relay output module, relay output contact is maximum 250A 10A
Input Pin connected to Burg stick. High-current, AC250V 10A, DC30V 10A.
12V 8 Channel Relay Module (with Optocoupler)
In stock
₹402.00 (Incl. GST)Specifications:
Operating Voltage: 12V DC
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
A freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED status indicators to indicate the relay ON/OFF status
Mounting holes provided
12V Sugar Cube Relay
In stock
₹25.00 (Incl. GST)Specification:
Product type: SPDT sugar cube relay
Voltage: 12v
Number of pins: 5
Pin type: through hole
Package contains: 1 X sugar cube SPDT relay switch
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In stock
₹244.00 (Incl. GST)Specifications:
Adjustable frequency PWM up to about 1.6 KHz
12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
Configurable push-pull or an open-drain output
The output enable pin to quickly disable all the outputs
Terminal block for power input
Reverse polarity protection on the terminal block input
Green power-good LED
24V 10A Sugar Cube Relay
In stock
₹25.00 (Incl. GST)Specification:
Product type: SPDT sugar cube relay
Voltage: 24v
Number of pins: 5
Pin type: through hole
Package contains: 2 X sugar cube SPDT relay switch
24V 4-Channel Relay Module (with Light Coupling)
In stock
₹156.00 (Incl. GST)Specifications:
Operating Voltage: 24V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
Mounting holes provided
3V 6V 12V 24V 35V PWM DC Motor Speed Regulator
In stock
₹79.00 (Incl. GST)Specifications:
Operating voltage: DC 4.5V- DC 35V
Output current: 0-5A
Output power: 90W (max)
Quiescent current: 7uA (standby)
PWM duty cycle: 1% -100%
PWM frequency: 20khz
Size: 30mm x 26mm x 14mm
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In stock
₹542.00 (Incl. GST)Specifications
Module Type: 4 Channel Solid State Relay
Control Voltage (Input): 5V DC
Control Signal Current: 5–12 mA per channel
Load Voltage (Output): 100–240V AC
Load Current (Output): Up to 2A per channel
Trigger Voltage: 0–2.5V (Low), 3–5V (High)
Isolation: Opto-isolated inputs for protection
Dimensions: ~ 73mm × 55mm × 25mm