Showing 25–36 of 164 results
Sensors/Modules
Filter by brands
BFD-1000 Five Channel Infrared Tracking Module Tracing Sensor
In stock
₹177.00 (Incl. GST)Input voltage: 3.0 V – 5.5 V
Output form: digital output (high and low level)
Detection distance: 0 – 4 cm (black and white line sensors)
0 – 5 cm (adjustable distance detection)
BMP 180 PRESSURE SENSOR
In stock
₹236.00 (Incl. GST)Specifications:
Vin: 3 to 5VDC
Logic: 3 to 5V compliant
Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
Up to 0.03hPa / 0.25m resolution
-40 to +85°C operational range, +-2°C temperature accuracy
This board/chip uses I2C 7-bit address 0x77.
Compatible with Andriod Board.
BUZZER MODULE (5V)
Available on backorder
₹35.00 (Incl. GST)Specifications:
SPU: MH-FMD
Material: ABS
Color: Blue
Work Voltage: 3.3-5V
PCB Dimension: 31 x 13 mm.
VCC : 3.3V-5V
GND : The Ground
I/O : I/O Interface of SCM
Case for XH-W1209 Temperature Controller
In stock
₹50.00 (Incl. GST)An acrylic case for an XH-W1209 temperature controller is a protective enclosure made of acrylic (a type of plastic) that is designed to hold and protect the XH-W1209 temperature controller. It may have openings for the various connectors and controls on the temperature controller, as well as ventilation holes to allow air to circulate and prevent overheating. An acrylic case can help to prevent damage to the temperature controller from impact, dust, and other environmental factors.
It can also improve the appearance of the temperature controller by enclosing it in a clear or colored enclosure. Acrylic cases are often used to protect and display electronic devices such as temperature controllers, Raspberry Pi boards, and other hobbyist or DIY projects. It includes all assembly hardware. It is shipped unassembled, assembly is required.
CD4053BD Triple 2-Channel Analog Multiplexer/Demultiplexer IC
In stock
₹13.00 (Incl. GST)SPECIFICATION:
Type: Triple 2-Channel Analog Multiplexer/Demultiplexer
Switch Configuration: 3 × SPDT (Single Pole Double Throw)
Supply Voltage Range: 3V to 20V (Single Supply) / ±3V to ±10V (Dual Supply)
On Resistance (RON): 125Ω typical (up to 240Ω max)
On/Off Switching Time: ~200 ns typical
Leakage Current: <1 µA
Channel Bandwidth: Up to 40 MHz
Operating Temperature Range: –55°C to +125°C
Package Type: DIP-16 / SOIC-16
Manufacturer: Texas Instruments / ON Semiconductor / Motorola
Logic Compatibility: CMOS / TTL compatible control inputs
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
In stock
₹105.00 (Incl. GST)Features:
0.1 ohm 1% 2W current sense resistor
Up to +26V target voltage
Up to ±3.2A current measurement, with ±0.8mA resolution
Senses Bus Voltages from 0 to 26 V
2C- or SMBus-compatible interface. The
Reports Current, Voltage, and Power.
CJMCU-4051 74HC4051 8 Channel Analog Multiplexer/Demultiplexer Breakoutut Board for Arduino
In stock
₹79.00 (Incl. GST)Specifications
Wide Analog Input Voltage Range: +/-5V
Low “ON” Resistance: 80 ohm (type) at Vcc = 4.5V; 70 ohm (type) at Vcc = 6.0V; 60 ohm (type) at Vcc = 9.0V.
Logic Level Translation: to enable 5V to communicate with +/-5V analog signals
Board Size: 30 x 19 mm
CJMCU-75 LM75B LM75 Temperature Sensor Module Digital I2C Breakout
In stock
₹155.00 (Incl. GST)Features:
I2C bus interface, the device address 7 slave address 1001xxx, can expand external eight devices on the same bus;
11bit ADC provides a temperature resolution of 0.125’C;
Programmable temperature threshold and hysteresis set points;
In order to reduce power consumption, the current consumption in shutdown mode is the only 1.0uA;
On power-up, the device can be used as a stand-alone temperature controller
CJMCU-GUVA-S12SD Sunlight Ultraviolet Ray Intensity UV Sensor
In stock
₹239.00 (Incl. GST)Specifications:
Power supply voltage of 2.5 V ~ 5 V
Low power consumption
Wide detection range: 240 nm to 370 nm
Wide Angle: 130 degrees
Schottky type photosensitive diode
Good linear response
High sensitivity
CJMCU-TEMT6000 An Ambient Light Sensor
In stock
₹100.00 (Incl. GST)Features:
AEC-Q101 qualified
High photosensitivity
Near-Human Eye Spectral Response
Scalable Output Voltage
Adapted to human eye responsivity
Lead (Pb)-free reflow soldering
Combo PH Electrode Probe + PH Value Detection Sensor Module 5V DC Arduino Compatible – Economy
In stock
₹1,700.00 (Incl. GST)Specifications:
Operating Voltage: 5V DC
Optimal Operating Temperature: ~25°C
Interface: BNC connector for PH Probe
Controller Connection: Analog port of Arduino or compatible controller
Indicator: Blue LED power indicator
Compatibility: Arduino and similar microcontrollers
Measurement Method: Immersion in standard solution, reading via serial monitor
Reusable: Probe can be washed for repeated measurements
CZL-601 SINGLE POINT LOAD CELL 6KG
In stock
₹295.00 (Incl. GST)Model: CZL-601
Measuring Range: 6 kg
Output Sensitivity: 1.0±0.1 mV/V