Showing 1–12 of 128 results
Sensors Modules
Buy sensors online from AM Electronics – Pune’s trusted electronics store. Explore a wide range of electronic sensors for Arduino, Raspberry Pi, automation, IoT, and industrial projects. Choose from motion sensors, temperature sensors, humidity sensors, IR sensors, gas sensors, ultrasonic sensors, flame detectors, and more. We supply reliable sensors for engineering students, embedded developers, robotics enthusiasts, and industrial applications. Fast delivery available in Pune and across India.
125 KHZ RFID Keyfob
In stock
₹12.00 (Incl. GST)QUICK OVERVIEW
Material: ABS
Dimension (LxWxH): 39.9×31.9×3.8mm
Response Frequency: 125Khz
Chip type: EM4305
Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
125khz RFID Card Thin (2 Pieces)
In stock
₹15.00 (Incl. GST)Specifications:
Anti-Collision
Data transfer: 106 k bit/s
Data integrity: 16 Bit CRC, parity, bit coding bit counting
Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
Operating frequency: 125KHz
Contactless transmission of data and supply energy (no battery needed)
2.2Inch Flex Sensor
In stock
₹270.00 (Incl. GST)Specifications:
Operating voltage of FLEX SENSOR: 0-5V
Can operate on LOW voltages
Power rating : 0.5Watt (continuous), 1 Watt (peak)
Life: 1 million
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Bend Resistance Range: 45K to 125K Ohms(depending on bend)
Compatiable with Arduino
3.3V/5V MB102 Breadboard Power Supply Module
In stock
₹60.00 (Incl. GST)Specifications:
Compatible with 5V, 3.3V.
Input Voltage :6.5-12V (DC) or USB power.
Output voltage: 3.3V, 5V switchable.
Maximum Output Current: <700ma.
Two-way independent control.
Can be switched to 0V, 3.3V, 5V.
On-board Two sets of 3.3V, 5V DC output pins, Facilitate the external leads.
4X4 Matrix Membrane Keypad
In stock
₹40.00 (Incl. GST)Specifications:
Operating Voltage (V): 12 DC
Operating temperature: 32 to 122 °F
Maximum Rating: 24 VDC, 30 mA
Keypad Dimensions: 6.9 cm X 7.9 cm
Cable dimensions: 2.0 cm X 8.8 cm
Maximum rating: 24 VDC, 30 mA
Pin counts: 8
Compatible with: Arduino, controller, processor etc
650nm 6mm 5V DC 5mW Mini Laser Dot Diode
In stock
₹20.00 (Incl. GST)Overview
Output Power: 5mW
Working Voltage: 5V DC
Working temperature: -10 ℃~＋40 ℃
Housing material: Copper
Working life: more than 2000 hours
Spot mode: Dot Facula (continuous output)
Laser wavelength: 650nm red-colored
Operating current: <40mA
Power lead length: 120mm
8 Way Tracking Lines Follower Module Infrared Detection
In stock
₹350.00 (Incl. GST)Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 digital I/O-compatible signals that can be read as a timed high pulse
Optimal sensing distance: 0.125″ (3 mm)
8 Way Tracking Lines Follower Module Infrared Detection
A3144 Hall Effect Sensor Magnet Detector Switch for Arduino
In stock
₹36.00 (Incl. GST)Features:
Digital Output Hall-effect sensor.
Operating voltage: typically5V.
Output Current: 25mA.
It can be used to detect both the poles of a magnet.
The output voltage is equal to the operating voltage.
Operating temperature: -40°C to 85°C.
Turn on and Turn off time is 2 μsec each.
Inbuilt reverse polarity protection.
Suitable for Automotive and Industrial Applications.
ACS712 20AMP Ac/DC Current Sensor
In stock
₹106.00 (Incl. GST)Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -20A ~ 20A
Sensitivity: 100mV/A
Low-noise analog signal path.
Power-On Time: 35us
5 µs output rise time in response to step input current.
Small footprint, low-profile SOIC8 package.
ACS712 30AMP Ac/DC Current Sensor
In stock
₹86.00 (Incl. GST)Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -30A ~ 30A
Sensitivity: 100mV/A
Low-noise analog signal path.
Power-On Time: 35us
5 µs output rise time in response to step input current.
Small footprint, low-profile SOIC8 package.
ACS712 Current Sensor 5A
In stock
₹100.00 (Incl. GST)Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -5A ~ 5A
Sensitivity: 180mV/A ~190mV/A, Typical: 185mV/A
Low-noise analog signal path.
Device bandwidth is set via the new FILTER pin.
5 µs output rise time in response to step input current.
Small footprint, low-profile SOIC8 package.
AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
In stock
₹450.00 (Incl. GST)Specifications:
Fully integrated single-lead ECG front end
Common-mode rejection ratio: 80 dB (dc to 60 Hz)
Two or three-electrode configurations
Qualified for automotive application
Single-supply operation: 2.0 V to 3.5
Fast restore feature improves filter settling