Showing 109–120 of 128 results
Sensors Modules
TEC-1 12706 40*40mm Thermo-Electric Cooler 6A Peltire Module
In stock
₹170.00 (Incl. GST)Specifications:
Model number: TEC1-12706
Operating Voltage: 12V
Maximum Voltage- Umax (V) : 15.4V
Maximum Current- Imax (A) : 3A
Maximum Power : 92 W
Maximum Temperature : 138°C
Power Cord: 200mm
Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino
In stock
₹50.00 (Incl. GST)Operating voltage: 3.3 to 5VDC
Ball Rolling type of tilt sensor.
This small module is easy to use.
A fixed bolt hole for easy installation
Wide voltage LM393 comparator
TP5000 3.6V/4.2V 1A Lithium Battery Charger Module
In stock
₹83.00 (Incl. GST)Single Battery Charger Module
Programable Charge Curren Form 0.1A to 2A
Programable Precharge Current Form 10% to 100%
Based on Tp5000 Battery Charger IC
TSOP 1838 IR Receiver Module – IR Sensor for Remote Control Systems
In stock
₹20.00 (Incl. GST)
TTP223 Capacitive Single Touch Sensor Module (Red)
In stock
₹8.00 (Incl. GST)Specifications:
Input Voltage : 2 Volt – 5.5 Volts DC.
The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
Sensitivity can adjust by the capacitance(0~50pF).
Stable touching detection of the human body for replacing traditional direct switch key.
Provides direct mode toggle mode by pad option(TOG pin).
After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
TTP223B Capacitive Single Touch Sensor Module
In stock
₹31.00 (Incl. GST)Specifications:
Power supply voltage(VCC): 2.0, 3, 5.5 V.
Output high VOH: 0.8VCC V
Output low VOL: 0.3VCC V
Response time (touch mode) : 60 mS
Response time (low power mode) : 220 mS
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy installation
TTP224 4-way Capacitive Touch Switch Module
In stock
₹75.00 (Incl. GST)Onboard TTP224 capacitive touch sensor IC 4 keys
4 board-level status indicator
Working voltage: 2.4V-5.5V
Advanced Pins breakout, so that the output mode and working mode selectable.
Low power selection
Turbidity Sensor with Module
In stock
₹571.00 (Incl. GST)Specifications:
Operating Voltage: 5VDC.
Current: 30mA (MAX).
Operating temperature: -30 ° C to 80 ° C.
Compatible with Arduino, Raspberry Pi, AVR, PIC, etc.
Measuring Range: 0 ~ 1000 NTU.
U-blox NEO-6M GPS Module with EPROM
In stock
₹250.00 (Incl. GST)Specifications:
Standalone GPS receiver
Anti-jamming technology
UART Interface at the output pins (Can use SPI ,I2C and USB by soldering pins to the chip core)
Under 1 second time-to-first-fix for hot and aided starts
Receiver type: 50 Channels – GPS L1 frequency – SBAS (WAAS, EGNOS, MSAS, GAGAN)
Time-To-First-fix: For Cold Start 32s, For Warm Start 23s, For Hot Start <1s
Maximum navigation update rate: 5Hz
Default baud rate: 9600bps
EEPROM with battery backup
Sensitivity: -160dBm
Supply voltage: 3.6V
Maximum DC current at any output: 10mA
Operation limits: Gravity-4g, Altitude-50000m, Velocity-500m/s
Operating temperature range: -40ºC TO 85°C
Ultrasonic sensor
In stock
₹66.00 (Incl. GST)Specifications:
Working Voltage : 5V (DC)
Output Signal : 5V
Sensor Angle : Less than 15 Degrees
Detection Distance : 2 cm to 450 cm
Input Trigger Signal : 10µs TTL impulse
Echo Signal : Output TTL PWL Signal
Theoretical Measuring Distance : 2cm to 450cm
Practical Measuring Distance : 2cm to 80cm
Accuracy : 3mm
Measuring angle covered : <15°
Operating Current : <15mA
Operating Frequency : 40Hz
High sensitivity ultrasonic range sensor
Works with Arduino board
US-100 Ultrasonic Sensor Distance Measuring Module with Temperature Compensation
In stock
₹198.00 (Incl. GST)Voltage: DC 2.4V – 5V
Average Current Consumption: < 2mA
Output mode: level or UART
Detection distance: 2cm – 450cm
Working temperature: -20°C to +70°C
It features temperature compensation.
Provides two output modes level or UART.