Showing 85–96 of 128 results
Sensors Modules
MQ-7 Module (Carbon Monoxide Gas Sensor)
In stock
₹110.00 (Incl. GST)Specifications :
circuit voltage: 5V±0.1
Heating voltage (high): 5V±0.1
Heating voltage (low): 1.4V±0.1
Load resistance: Adjustable
Heating resistance: 33Ω±5%
Heating time (high): 60±1 seconds
Heating time (low): 90±1 seconds
Heating consumption: About 350mW
Using temperature: -20°C-50°C
Storage temperature: -20°C-50°C
Relative humidity: Less than 95%RH
Oxygen concentration: 21%(stand condition) the oxygen concentration can affect the sensitivity characteristic
MQ-8 Module (Hydrogen Gas Sensor)
In stock
₹110.00 (Incl. GST)Specifications:
Power supply needs: 5V
Interface type: Analog, Digital
High sensitivity to Hydrogen (H2)
Small sensitivity to alcohol, LPG,cooking fumes
Stable and long life
Size: 32x20mm
Circuit voltage: 5V±0.1
Heating voltage: 5V±0.1
Load resistance: 10KΩ
Heater resistance: 31±5%
Heating consumption: less than800mW
Using Temperature: -10°C-50°C
Storage Temperature: -20°C-70°C
Related humidity: less than 95%Rh
Oxygen concentration: 21%(standard condition)Oxygen concentration can affect sensitivity
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module
In stock
₹110.00 (Incl. GST)Specifications:
Input voltage: DC 5V
Power: 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
O output: 0.1-0.3V (relatively clean), the highest concentration voltage is about 4V.
Suitable for home or factory gas leakage monitoring devices.
Have better sensitivity to Carbon Monoxide, Methane and LPG Gas.
High quality dual-panel design, with power indicator and TTL signal output instructions.
DO switching signal (TTL) output and AO analog signal output.
TTL output valid signal is low. (When the output low signal is on, it can be directly connected micro-controller or relay module.)
Analog output voltage: the higher concentration, the higher voltage.
Multifunction soil probe ZTS-3002-TR-ECTHNPKPH-N01, PH, NPK, conductivity, temperature and humidity RS485
In stock
₹8,850.00 (Incl. GST)Key features:
Soil temperature measurement
Accurate moisture measurement (gravimetric)
Electrical Conductivity (EC) – an indicator of salinity and ion concentration
Soil pH monitoring – acidity / alkalinity
Nutrient measurement NPK (nitrogen, p, potassium) – in mg/kg
Communication interface RS485 (Modbus RTU)
Robust and waterproof construction – suitable for permanent outdoor use
Compact dimensions, integrated probe with steel tips
Specifications:
Model: ZTS-3002-TR-ECTHNPKPH-N01
Power supply: 4.5-30 V DC
Interface: RS485, Modbus RTU
Baud rate: 2400/4800/9600 – default 4800
Soil temperature: -30 to +70 °C
Soil moisture: 0–100% RH
soil pH: 3-9 pH
Electrical Conductivity (EC): 0-10000 µS/cm
NPK content: 0-1999 mg/kg for each element
Probe material: stainless steel + ABS
Protection: IP67 (waterproof)
Probe dimensions: approx. 123x45x15 mm (without cable)
Cable length: usually 1.2 m
NVIDIA® Jetson Orin™ Nano Super Developer Kit
Available on backorder
₹34,999.00 (Incl. GST)- Model: Jetson Orin Nano Super Developer Kit
- AI Performance: 67 TOPS, Ampere GPU, 1024 CUDA cores
- CPU: 6-core ARM Cortex-A78AE
- Memory: 8GB LPDDR5
- Storage: SD card & external NVMe support
- Connectivity: Gigabit Ethernet, USB 3.2, M.2, 2x MIPI CSI-2
PIR Sensor Module HC-SR501
In stock
₹59.94 (Incl. GST)Wide Working Voltage Range: DC 4.5V- 20V
Current Drain: <60uA
Detection Angle: <140°
Detection Distance: 3 to 7m (can be adjusted)
Blockade time: 2.5s (Default)
Work temperature: -20-+80°C
PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor
In stock
₹392.00 (Incl. GST)Features:
Power supply voltage: DC5 ± 2V
Sensitivity: 0.5V / (0.1mg / m3)
The minimum detection level of particles: 0.8 m
Clean air voltage: 0.9V typ.
Low consumption current (Icc: MAX. 20 mA)
The presence of dust can be detected by the photometry of only one pulse
Enable to distinguish smoke from house dust
PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library
In stock
Original price was: ₹399.00.₹380.00Current price is: ₹380.00. (Incl. GST)Specifications:
Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI, and HSU modes
Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of the last version
Built-in PCB Antenna, with 5cm~7cm communication distance
On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
Work as an RFID reader/writer
Work as a 1443-A card or a virtual card
Compatible with Arduino Board.
PS2 Joystick Module Breakout Sensor
In stock
₹40.00 (Incl. GST)specifications:
2 potentiometers for 2 axes
Connector: +5Vcc – GND – VRx – VRy – SW
Dimensions:4 X 2.6 X 3.2CM
1 x switch
PT1000-S Waterproof 1m 30mm Stainless Steel Pole Probe Temperature Sensor
In stock
₹158.00 (Incl. GST)Model number: FTARP05 series.
Mounting form Polish rod probe
The Probe material: Stainless steel.
Probe diameter: 4mm.
Length of the probe: 30mm.
Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated).
Accuracy ±(0.3°C+0.5%|t|).
Thermal response time: <0.5 sec.
R307S Optical Fingerprint Reader Sensor Module
In stock
₹866.00 (Incl. GST)Specifications:
Supply voltage: DC 4.2 ~ 6.0V
Working current: 50mA (typical)
Peak current: 80mA
Fingerprint image input time: <0.3 seconds
Window area: 14×18 mm
Matching mode:1: 1 and 1:N
Characteristic file size: 256 bytes
Template size: 512 bytes
Storage capacity: 1000 pieces
Security Level: 5 (from low to high: 1,2,3,4,5)
Fake rate (FAR): <0.001%
Refusal rate (FRR): <1.0%
Search time: <1.0 seconds (1: 1000 hours, mean value)
Host interface: UART USB1.1
Baud rate (UART): (9600xN) bps Where N = 1 ~ 12 (default N = 6, ie 57600bps)
Compatible with Raspberry Pi, Arduino
Raindrop Water drop Sensor
In stock
₹60.00 (Incl. GST)Specifications:-
Function: rain detection and rainfall intensity measurement and monitoring
Weight: aprx 8g
PCB or module size: 30mm x 16mm
Control board size: 54mm x 40mm
Colour and shape: as shown in image