Showing 241–252 of 377 results
Shop
Mini USB ATmega32U4 Pro Micro 5V 16MHz Board Modules
In stock
₹450.00 (Incl. GST)Microcontroller: ATmega32U4, 16MHz
Memory: 32KB Flash, 2.5KB SRAM
USB: Mini USB for power and communication
GPIO: Digital, analog, and power pins
USB: Direct USB HID functionality
MLX90614ESF Non-Contact Human Body Infrared Temperature Measurement Module
In stock
₹795.00 (Incl. GST)Features:
Small size,low cost
Easy to integrate
Factory calibrated in wide temperature range: -40 Celsius to 85 Celsius for sensor temperature and -70 Celsius to 380 Celsius for object temperature
High accuracy of 0.5 Celsius over wide temperature range (0-50 Celsius for both Ta and To)
High (medical) accuracy calibration
Measurement resolution of 0.02 Celsius
Single zone version
SMBus compatible digital interface
Customizable PWM output for continuous reading
Voltage 5V
Simple adaptation for 8 to 16V applications
Power saving mode
Different package options for applications and measurements versatility
Automotive grade
Board Size:19.38*11.2mm
Mobile Power Boost DIY 18650 Lithium Battery Digital Dual USB
In stock
₹226.00 (Incl. GST)Specifications :
USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
Charging display: intelligent digital display
Batteries Type: liquid lithium-ion batteries (18650) 3.7 lithium-ion batteries only
Protection circuit: Overcharge protection: 4.250V Overcharge protection release: 4.100V
Protection circuit: Over-discharge protection: 2.900V Over-discharge protection release: 3.000V
Idle time before LCD switch off: 60secs.
Mornsun Power B2424S-1WR3 : 1W, 24V to 24V – Isolated DC-DC Converter – PO-2366-D
In stock
₹232.00 (Incl. GST)Part Number : B2424S-1W
Input Voltage : 24V
Output : 24V
Current : 4mA to 42mA
Efficiency : 79%
Isolation : 1KVDC
Temperature Range: -40°C ~ +85°C
RoHS Compliance
MPR121 Breakout V12 Capacitive Touch Sensor Controller Module I2C Interface keyboard Development Board for Arduino
In stock
₹90.00 (Incl. GST)Specifications:
Operating Voltage: 2.5 to 3.6v
Connection Interface: I2C.
Operating Voltage: 2.5-3.6 VDC
Application: Capacitive Touch Sensor Controller
Number of touch inputs:12
MPU-6050 3-Axis Accelerometer and Gyro Sensor Module
In stock
₹210.00 (Incl. GST)Specifications:
MEMS 3-aixs accelerometer and 3-axis gyroscope values combined
Power Supply: 3-5V
Communication : I2C protocol
Built-in 16-bit ADC provides high accuracy
Built-in DMP provides high computational power
Can be used to interface with other IIC devices like magnetometer
Configurable IIC Address
In-built Temperature sensor
MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module
In stock
₹450.00 (Incl. GST)Accelerometer, Gyroscope, and Magnetometer
Power Supply: DC3.3V-5V
Chip: MPU9250
Size: 22 mm x 17 mm.
Gyro range : ± 250 500 1000 2000 ° / s
Acceleration range: ± 2 ± 4 ± 8 ± 16g
Magnetic field range: ± 4800uT
9 DOF modules
MQ-135 Module (Ammonia, Sulphide and Benzene Gas Sensor)
In stock
₹135.00 (Incl. GST)Specifications:
Wide detecting scope
Fast response and High sensitivity
Stable and long life
Operating Voltage is +5V
Detect/Measure NH3, NOx, alcohol, Benzene, smoke, CO2, etc.
Analog output voltage: 0V to 5V
Digital output voltage: 0V or 5V (TTL Logic)
Preheat duration 20 seconds
Can be used as a Digital or analog sensor
The Sensitivity of Digital pin can be varied using the potentiometer
MQ-137 Ammonia Gas NH3 Sensor Module
In stock
₹1,430.00 (Incl. GST)Specifications :
Wide detecting scope
Fast response (less than 1s)
High sensitivity( 3%)
the circuit voltage: DC5V
Stable and long life
Operating Voltage is +5V
Detect/Measure NH3, Ammonia
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
In stock
₹105.00 (Incl. GST)Operating Voltage is 5V
Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
Can be used as a Digital or analog sensor
The Sensitivity of Digital pin can be varied using the potentiometer
Long life and low cost
Simple drive circuit
MQ-3 Alcohol Detector Gas Sensor Module
In stock
₹120.00 (Incl. GST)Specifications:
Operating voltage: 5V
Load resistance: 200KΩ
Heater resistance:33Ω ± 5%
Heating consumption:<800mw
Sensing Resistance:1 MΩ – 8 MΩ
concentration Scope:5 – 500 ppm
Preheat Time: Over 24 hour
MQ-4 Module (Methane ,CNG Gas Sensor)
In stock
₹94.00 (Incl. GST)Specifications:
Sensor Type Semiconductor
Power requirements: VCC – 5V±0.1
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output: 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detection Gas: Natural gas/Methane
Detection Concentration: 200-10000ppm (Natural gas / Methane)
Interface: 1 TTL compatible input (HSW), 1 TTL compatible output (ALR)
Heater consumption: less than 750mw
Operating temperature: 14 to 122 °F (-10 to 50°C)
RH Related humidity less than 95%Rh
O2 Oxygen concentration is 21% (standard condition) – Oxygen concentration can affect sensitivity
Load resistance: 20KΩ
Sensing Resistance Rs: 10KΩ- 60KΩ (1000ppm CH4)
Preheat time:Over 24 hour
Standard Encapsulation Bakelite, Metal cap