Showing 253–264 of 377 results
Shop
MQ-5 Methane LPG Liquid Propane Gas Sensor Module
In stock
₹95.00 (Incl. GST)Specifications :
Detecting Concentration: 300 to 10000 ppm
Input Voltage: 5 VDC
Power: 150 mA
Digital Output Voltage: TTL digital 0 and 1 (0.1 V and 5 V)
Analog Output Voltage (relatively clean): 0.1 V to 0.3 V
Analog Output Voltage (highest concentration): 4 V
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module
In stock
₹90.00 (Incl. GST)Specifications:
Operating Voltage is +5V
Can be used to detect LPG or Butane gas
Analog output voltage: 0V to 5V
Digital Output Voltage: 0V or 5V (TTL Logic)
Preheat duration 20 seconds
Can be used as a Digital or analog sensor
The Sensitivity of Digital pin can be varied using the potentiometer
MQ-7 Module (Carbon Monoxide Gas Sensor)
In stock
₹110.00 (Incl. GST)Specifications :
circuit voltage: 5V±0.1
Heating voltage (high): 5V±0.1
Heating voltage (low): 1.4V±0.1
Load resistance: Adjustable
Heating resistance: 33Ω±5%
Heating time (high): 60±1 seconds
Heating time (low): 90±1 seconds
Heating consumption: About 350mW
Using temperature: -20°C-50°C
Storage temperature: -20°C-50°C
Relative humidity: Less than 95%RH
Oxygen concentration: 21%(stand condition) the oxygen concentration can affect the sensitivity characteristic
MQ-8 Module (Hydrogen Gas Sensor)
In stock
₹110.00 (Incl. GST)Specifications:
Power supply needs: 5V
Interface type: Analog, Digital
High sensitivity to Hydrogen (H2)
Small sensitivity to alcohol, LPG,cooking fumes
Stable and long life
Size: 32x20mm
Circuit voltage: 5V±0.1
Heating voltage: 5V±0.1
Load resistance: 10KΩ
Heater resistance: 31±5%
Heating consumption: less than800mW
Using Temperature: -10°C-50°C
Storage Temperature: -20°C-70°C
Related humidity: less than 95%Rh
Oxygen concentration: 21%(standard condition)Oxygen concentration can affect sensitivity
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module
In stock
₹110.00 (Incl. GST)Specifications:
Input voltage: DC 5V
Power: 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
O output: 0.1-0.3V (relatively clean), the highest concentration voltage is about 4V.
Suitable for home or factory gas leakage monitoring devices.
Have better sensitivity to Carbon Monoxide, Methane and LPG Gas.
High quality dual-panel design, with power indicator and TTL signal output instructions.
DO switching signal (TTL) output and AO analog signal output.
TTL output valid signal is low. (When the output low signal is on, it can be directly connected micro-controller or relay module.)
Analog output voltage: the higher concentration, the higher voltage.
Multifunction soil probe ZTS-3002-TR-ECTHNPKPH-N01, PH, NPK, conductivity, temperature and humidity RS485
In stock
₹8,850.00 (Incl. GST)Key features:
Soil temperature measurement
Accurate moisture measurement (gravimetric)
Electrical Conductivity (EC) – an indicator of salinity and ion concentration
Soil pH monitoring – acidity / alkalinity
Nutrient measurement NPK (nitrogen, p, potassium) – in mg/kg
Communication interface RS485 (Modbus RTU)
Robust and waterproof construction – suitable for permanent outdoor use
Compact dimensions, integrated probe with steel tips
Specifications:
Model: ZTS-3002-TR-ECTHNPKPH-N01
Power supply: 4.5-30 V DC
Interface: RS485, Modbus RTU
Baud rate: 2400/4800/9600 – default 4800
Soil temperature: -30 to +70 °C
Soil moisture: 0–100% RH
soil pH: 3-9 pH
Electrical Conductivity (EC): 0-10000 µS/cm
NPK content: 0-1999 mg/kg for each element
Probe material: stainless steel + ABS
Protection: IP67 (waterproof)
Probe dimensions: approx. 123x45x15 mm (without cable)
Cable length: usually 1.2 m
Multitec 07-SS Heavy Duty Nipper Wire Cutter
In stock
₹110.00 (Incl. GST)Specifications:
Model: 07-SS
Brand: Multitec
Type: Heavy Duty Nipper Wire Cutter
Blades: High-quality stainless steel
Handles: Ergonomic, non-slip grip (material: thermoplastic rubber)
Multitech MT-150B-SS Wire Stripper and Cutter
In stock
₹118.00 (Incl. GST)Dual Functionality: Combines wire stripping and cutting capabilities in one tool
Ergonomic Design: Comfortable grip handles for ease of use during prolonged tasks
High Strength: Built with high tensile strength to withstand heavy-duty use
Rust Resistance: Made from stainless steel to prevent rust and corrosion
Precision Cutting: Designed for clean cuts and accurate wire stripping
Applications
Ideal for electricians, technicians, and hobbyists
Suitable for various electrical tasks including wiring, looping, and installation
Effective for cutting fiber cables and other types of wires
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
In stock
₹240.00 (Incl. GST)Operating Voltage (logic level): 5V
With USB cable and Soldered Connector
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
In stock
₹204.00 (Incl. GST)Specifications:
Operating Voltage (logic level): 5V
With Soldered Connector
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
NANO IO Shield Expansion Board For Arduino Screw Terminals
In stock
₹159.00 (Incl. GST)Specifications:
Compatible with Arduino NANO
All digital and analog pins breakout
Compact size.
Leads all pins out, convenient for wiring and doing experiments.
Dimensions: 53 x 36 x 12 (LxWxH) mm.
Weight: 22 gm.
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V
In stock
₹75.00 (Incl. GST)Specifications:
Module based on the NE555 chip.
Input voltage: DC 12V
Adjustable time: 0-10 s
AC Control voltage: 250V/max. 10A
DC Control Voltage: 30V/max. 10A
Max. load: 2200W