Shop

Proto Screw Shield 1.0 For Arduino Uno

SKU: S-111

In stock

226.00 (Incl. GST)

Specifications:
Arduino terminal to provide the IO, port connection.
3.81 posts quality, reliable, convenient, durable.
Combined with the Proto Shield, the middle can be used as a prototype expansion board.
Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
The middle section can be placed small bread plate, convenient test extend

PS2 Joystick Module Breakout Sensor

SKU: S-032

In stock

40.00 (Incl. GST)

specifications:

2 potentiometers for 2 axes
Connector: +5Vcc – GND – VRx – VRy – SW
Dimensions:4 X 2.6 X 3.2CM
1 x switch

PT1000-S Waterproof 1m 30mm Stainless Steel Pole Probe Temperature Sensor

SKU: S-150

In stock

158.00 (Incl. GST)

Model number: FTARP05 series.

Mounting form Polish rod probe
The Probe material: Stainless steel.
Probe diameter: 4mm.
Length of the probe: 30mm.
Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated).
Accuracy ±(0.3°C+0.5%|t|).
Thermal response time: <0.5 sec.

R307S Optical Fingerprint Reader Sensor Module

SKU: S-056

In stock

866.00 (Incl. GST)

Specifications:
Supply voltage: DC 4.2 ~ 6.0V
Working current: 50mA (typical)
Peak current: 80mA
Fingerprint image input time: <0.3 seconds
Window area: 14×18 mm
Matching mode:1: 1 and 1:N
Characteristic file size: 256 bytes
Template size: 512 bytes
Storage capacity: 1000 pieces
Security Level: 5 (from low to high: 1,2,3,4,5)
Fake rate (FAR): <0.001%
Refusal rate (FRR): <1.0%
Search time: <1.0 seconds (1: 1000 hours, mean value)
Host interface: UART USB1.1
Baud rate (UART): (9600xN) bps Where N = 1 ~ 12 (default N = 6, ie 57600bps)
Compatible with Raspberry Pi, Arduino

Raindrop Water drop Sensor

SKU: S-010

In stock

60.00 (Incl. GST)

Specifications:-

Function: rain detection and rainfall intensity measurement and monitoring
Weight: aprx 8g
PCB or module size: 30mm x 16mm
Control board size: 54mm x 40mm
Colour and shape: as shown in image

Raspberry Pi 4 Model-B with 4 GB RAM

SKU: Rasp Board

In stock

Original price was: ₹5,649.00.Current price is: ₹5,310.00. (Incl. GST)

Specifications

Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
1GB, 2GB or 4GB LPDDR4-2400 SDRAM (depending on model)
2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
Gigabit Ethernet
2 USB 3.0 ports; 2 USB 2.0 ports.
Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
2 × micro-HDMI ports (up to 4kp60 supported)
2-lane MIPI DSI display port
2-lane MIPI CSI camera port
4-pole stereo audio and composite video port
H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
OpenGL ES 3.0 graphics
Micro-SD card slot for loading operating system and data storage
5V DC via USB-C connector (minimum 3A*)
5V DC via GPIO header (minimum 3A*)
Power over Ethernet (PoE) enabled (requires separate PoE HAT)
Operating temperature: 0 – 50 degrees C ambient
* A good quality 2.5A power supply can be used if downstream USB peripherals consume less than 500mA in total.

Raspberry Pi 4B Aluminum Heatsink Set of 4

SKU: SB-085b

In stock

53.00 (Incl. GST)

Raspberry Pi Zero 2 W with Header

SKU: SB-004

In stock

2,054.00 (Incl. GST)

Specifications:
Model: Raspberry Pi Zero 2 W
CPU: 1 GHz quad-core Arm Cortex-A53
RAM: 512 MB
Wireless: Wi-Fi (2.4 GHz) and Bluetooth 4.2
Ports: Mini HDMI®, micro USB, microSD slot
Camera: CSI-2 connector

Raspberry Pi Zero W Pre-Soldered Header

SKU: SB-004a

Out of stock

1,731.00 (Incl. GST)

Specifications:
Fully HAT compatible
40pin GPIO (Unpopulated)
Stream and watch Hi-definition video output at 1080P
512MB RAM and Micro SD Slot for OS
Tiny Current Draw ~ 140mA at 5V!
Mini-HDMI for Video
Micro-USB OTG Host for Data and Power
Micro-CSI Camera Port
On-Board Bluetooth and WiFi.

RCWL-0516 Microwave Radar Sensor

SKU: S-038

In stock

45.00 (Incl. GST)

Specifications:
Input Voltage – 4V to 28V
Operating current – 3mA (max.)
Operating frequency – 3.2GHz
Transmission power – 30mW (max.)
Regulated output voltage – 3.3V, max. 100mA
Sensing distance – 5 to 7 meters

RF Transmitter Receiver Module 433MHz Wireless Link Kit For Arduino FS1000A

SKU: S-151

In stock

90.00 (Incl. GST)

Specifications:

Wide input supply (2.5 V to 12V)
Easy to integrate (V+, GND, and Data)
The device in deep sleep mode when Data pin is grounded
Very small dimension.

RFID Reader/Writer RC522 SPI S50 with 13.56MHz RFID Card and Tag

SKU: S-034

In stock

90.00 (Incl. GST)

Specifications:

Operating Voltage: 2.5V to 3.3V
Operating Current:13-26mA
Idle Current:10-13mA
Peak current: <30mA
Sleep current: <80uA
Operating Frequency: 13.56MH
Communication: SPI, I2C protocol, UART