Showing 313–324 of 377 results
Shop
SIM A7672S 4G LTE TTL Modem with GNSS + BLE
In stock
₹1,416.00 (Incl. GST)Features:
Supports Voice Calls, Data, SMS, GPS and Bluetooth.
Works on 5V @ 500mA
Suitable for LTE networks
Supports LTE-FDD as well as LTE-TDD frequency bands.
Basically control via AT commands .
Additionally Nano SIM Card Holder.
Power LED as well as Network Status LED
Powerful TCP/IP protocol stack for internet data transfer.
Supports maximum 10Mbps downlink rate and 5Mbps uplink rate.
Abundant software functions: FOTA, LBS, SSL
SMA connector for external antenna
On board UART TTL logic level conversion (Both 3.3V and 5V)
Supported Band: LTE-FDD B1/B3/B5/B8 , LTE-TDD B34/B38/B39/B40/B41
On board pins for RING, NETLIGHT, STATUS, DTR(DTE ready) and Reset
SIM800C LM39302 TTL Board
In stock
₹1,004.00 (Incl. GST)SIM800C is a Quad-Band GSM/GPRS module in an LCC type that supports GPRS up to 85.6kbps data transfer. It has strong extension capability with abundant interfaces including UART, USB2.0, GPIO, etc. The module provides much flexibility and ease of integration for customer’s applications. Few of its advantages are as follows
Small-size quad-band GSM/GPRS module
LCC form factor, easy for solder
Abundant software functions: DTMF, MMS, MUX
Low Power consumption
Embedded TCP/UDP protocols
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
In stock
₹230.00 (Incl. GST)Specifications:
Operating Voltage: 3.4-4.4V DC
Peak Current: 2A
TTL serial port for serial port, you can link directly to the micro-controller.
Don’t need MAX232.
The power module automatically boots, homing network.
Onboard signal lights all the way.
It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SIM900A GSM GPRS Module with RS232 Interface and SMA Antenna
In stock
₹945.00 (Incl. GST)Features:
Dual-band GSM/GPRS engine
Operates on frequencies: EGSM 900MHz and DCS 1800MHz
GPRS multi-slot class 10/ class 8 (optional)
Supports GPRS coding schemes: CS-1, CS-2, CS-3, and CS-4
Utilizes GPRS/GSM technology for communication with a mobile SIM card
Compatible with various microcontrollers such as Arduino and Raspberry Pi
Suitable for embedded applications
RS232 interface for direct communication with a computer or MCU kit
Compact size
Suitable for IoT-based projects and embedded systems
SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
In stock
₹420.00 (Incl. GST)Model: SIMONK 30A.
Constant Current: 30A (Max 40A < 10 sec).
BEC: 5V 2A.
Suitable Batteries: 2-3S LiPo.
Single Motor Electric Longboard Skateboard Controller ESC Replace Control
In stock
₹10,000.00 (Incl. GST)Specification:
Single Motor Drive ESC:
Rated Voltage: 36V
Current: 12A
Power: 430W (36V)
Rotate Speed: 3000rpm
Speed: 35km/h
Drive Mode: FOC
Sensing Mode: Hall
Load Bearing: 120kg
Protection: Over-voltage, Under-voltage, Overheat, Stall, CW/CCW, Overcurrent, Speed Control
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio
In stock
₹40.00 (Incl. GST)Specifications:
Operating Voltage: 3.3V to 5V DC
Operating Current: 15mA
Output Digital – 0V to 5V, Adjustable trigger level from preset
Output Analog – 0V to 5V based on infrared radiation from fire flame falling on the sensor
LEDs indicating output and power
PCB Size: 3.2cm x 1.4cm
LM393 based design
Easy to use with Microcontrollers or even with normal Digital/Analog IC
Small, cheap and easily available
Compatible with Arduino , raspberry pi.
Soil NPK Sensor 5V RS485 JXCT
In stock
₹3,540.00 (Incl. GST)Soil NPK Sensor – 5V RS485 (JXCT)
The Soil NPK Sensor is an advanced agricultural-grade sensor that measures the concentration of essential soil nutrients: Nitrogen (N), Phosphorus (P), and Potassium (K). Ideal for precision farming, this sensor uses RS485 communication and is built by JXCT, a trusted name in environmental sensing.
Solar for DIY Square Shape Mini Solar Panel 6V-100 mAh
In stock
₹141.00 (Incl. GST)Specifications:
Voltage: 6V 100mAh
Material：Polycrystalline
Size: 70x70mm
Weight: 16g
SOLDRON 25W/230volts Soldering Iron
In stock
Original price was: ₹368.00.₹350.00Current price is: ₹350.00. (Incl. GST)- Attains full operating Temperature within a seconds.
- Maintains constant tip temperature.
- Low Leakage Current.
- Safe for the use on dedicated and sensitive Components.
- Maximum Heat transfer efficiency.
- Slide on a Replaceable tip.
- Cool Grip Insulating Nylon Handle
- High Quality Built Material.
Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino
In stock
₹45.00 (Incl. GST)Specifications:
Operating Voltage: 3.3V to 5V DC
LM393 comparator with threshold preset
PCB Size: 3.4cm * 1.6cm
Induction distance: 0.5 Meter
Operating current: 4~5 mA
Microphone Sensitivity (1kHz): 52 to 48 dB
Speed Measuring Sensor Groove Coupler Module For Arduino
In stock
₹49.00 (Incl. GST)Specifications:
Using imported groove optical coupling sensor, width 5mm.
It have the output state light, if output high level, the lights are off. if output low level ,it on.
If it covered, it will output high level; otherwise it output low level.
Good signal and waveform, with strong driving ability for more than 15mA.
The working voltage of 3.3V to 5V
Output: digital switch output (0 and 1)
Equipped with a fixed bolt hole, easily install.
Use the LM393 wide voltage comparer
Speed measuring sensor groove coupler module for Arduino