5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
In stock
₹284.00 (Incl. GST)Resolution: 5 MP
Interface Type: CSI(Camera Serial Interface)
Dimensions: 25x23x8 (LxWxH) mm
Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
Fully Compatible with Raspberry Pi 3 and 4 Model B
Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
ADS1115 16 Bit I2C ADC Analog to Digital Converter Module
In stock
₹164.00 (Incl. GST)Specifications:
Single-shot mode: automatically turns off
Low current consumption: Continuous mode 150 μA
Wide supply voltage range: 2.0V to 5.5V
Interfacing is done via I2C
Programmable data rate: 8SPS to 860SPS
Low drift internal voltage reference
Internal Oscillator
Internal PGA up to 860 samples per second (SPS)
Four single-ended or two differential inputs (ADS1115)
Operating temperature: -40 ° C to + 140 ° C
Programmable comparator
ARDUINO LELY PAD BIG ATMEGA328P
Out of stock
₹372.00 (Incl. GST)Features
Microcontroller : ATmega168V or ATmega328V
Operating Voltage 2.7-5.5 V
Input Voltage 2.7-5.5 V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
Flash Memory 16 KB (of which 2 KB used by bootloader)
SRAM 1 KB
EEPROM 512 bytes Clock Speed 8 MHz
Arduino Mega 2560 R3 Board A16U
In stock
₹1,199.00 (Incl. GST)Features
Microcontroller : ATmega2560
Operating Voltage : 5V
Input Voltage (recommended) : 7-12V
Input Voltage (limit) : 6-20V
Digital I/O Pins : 54 (of which 15 provide PWM output)
Analog Input Pins : 16
DC Current per I/O Pin : 20 mA
DC Current for 3.3V Pin : 50 mA
Flash Memory : 256 KB of which 8 KB used by bootloader
SRAM : 8 KB
EEPROM : 4 KB
Clock Speed : 16 MHz
LED BUILTIN : 13
Arduino Sensor Shield V5 Expansion Board
In stock
₹95.00 (Incl. GST)Quick Overview:
Retain the merits of the V4.0 version
Laminated design
PCB immersion gold processing technology
IIC interface
Bluetooth module communication interface
SD card module communication interface
APC220 wireless rf modules communication interface
RB URF v1.1 ultrasonic sensors interface
12864 LCD string of line and parallel interface
32 servo controller interface
Compatible With Arduino Uno
Arduino Uno R3 DIP
In stock
₹454.00 (Incl. GST)Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)
The Arduino Uno R3 is an open-source microcontroller board based on the ATmega328 chip. It features 14 digital input/output pins, 6 analog input pins, an onboard 16 MHz ceramic resonator, a USB connection port, a DC power jack, an ICSP header, and a reset button for the microcontroller. This board includes everything needed to support the microcontroller, making it easy to get started—simply connect it to a computer via a USB cable or power it with a DC adapter or battery.
Unlike previous models, the Uno does not use the FTDI USB-to-serial driver chip. Instead, it incorporates the Atmega16U2 (or Atmega8U2 up to version R2) as a USB-to-serial converter. The Arduino Uno can be powered through the USB connection or an external power supply, with the power source selected automatically.
External power can be supplied via an AC-to-DC adapter (wall-wart) or battery. The adapter connects through a 2.1mm center-positive plug into the board’s power jack, while battery leads can be connected to the GND and VIN pin headers of the power connector. The board can operate on an external supply ranging from 6 to 20 volts. However, if supplied with less than 7V, the 5V pin may output less than five volts, potentially leading to instability. Conversely, using more than 12V could cause the voltage regulator to overheat and damage the board. The recommended voltage range for the Arduino Uno is 5V to 12V.
Features
Operating Voltage: 5V
MCU: ATMEGA 328P
Input Voltage (recommended): 7-12V.
Input Voltage (limit): 6-20V.
Digital I/O Pins: 14
PWM Digital I/O Pins: 6
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB
Flash Memory for Bootloader: 0.5 KB
SRAM: 2 KB
EEPROM: 1 KB
Clock Speed: 16 MHz
Arduino Uno R3 with Cable
In stock
₹520.00 (Incl. GST)Specifications:
ATmega328 Controller
Digital IO 13
PWM Channel 6
Working Freq. 16MHz
DC current / IO 40mA
DC current / IO 50mA (3.3V)
Input Voltage 6V to 20V DC
Flash 32Kb
SRAM 2Kb
EEPROM 1Kb
ATTINY85 USB Development Board
In stock
₹242.00 (Incl. GST)Specification:
Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
Power via USB or External Source or 7-16 v to 5 v (automatic selection).
The Onboard, 150 ma 5 v Regulator.
Built-in USB and serial were debugging).
6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
8 k Flash Memory (about 6 k after bootloader).
The I2C and SPI (vis USI).
The Power LED and the Test/Status LEDs.
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software and Driver
In stock
₹234.00 (Incl. GST)Features:
Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
With 24/25 status indicator lamp
Support USB to TTL conversion support 24EEPROM and 25 SPI flash 8pin/ 16pin chip
Recognize 25 series chip automatically
Supports download STC series procedure of single chip
SPI pin to support expanding the utility
STC microcontroller supports a full range of program download
Support expanding the utility by SPI pin
With SOP8 SOP16 to DIP8 converter board
Supports Windows XP, Vista, Win7 and Win8 (32/64bit) system
Provide 5V-3.3V power supply output
CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board
In stock
₹75.00 (Incl. GST)Features :
Low Standby Current.
1-to-8 Bidirectional Translating Switches.
I2C Bus and SMBus Compatible.
5-V Tolerant Inputs.
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
CP2102(6-pin) USB 2.0 to TTL UART serial converter
In stock
₹110.00 (Incl. GST)Specifications:
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector.
All handshaking and modem interface signals.
Baud rates: 300 bps to 1 Mbps.
Byte receives buffer; 640 bytes transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Works with existing COM port PC Application
Digispark ATTINY85 Mini USB Development Board
In stock
₹279.00 (Incl. GST)Specifications :
High Performance, Low Power AVR® 8-Bit Microcontroller
Non-volatile Program and Data Memories
8K Bytes of In-System Programmable Program Memory Flash
Endurance: 10,000 Write/Erase Cycles
512 Bytes In-System Programmable EEPROM
512 Bytes Internal SRAM
Peripheral Features
Two High-Frequency PWM Outputs with Separate Output Compare Registers
USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
10-bit ADC