Filter by price
Filter by brands
Filter by category
- (ESC) Drone Speed Controller
- 12V Relays Modules
- 12x12 Tact Switch and Caps
- 18650 BMS
- 24V Relays Modules
- 5V Relay Modules
- 6.0*6.0 Tact switch and Caps
- 8-bit Microcontrollers IC
- Accelerometer / Gyro
- ADC ICs
- Ai-Thinker Dev. Boards & Modules
- Amplifier & Comparator IC
- Antenna
- Arduino
- Arduino Shields
- Arduino, Boards
- ARM
- ARM Microcontrollers IC
- Audio Amplifier Modules
- Batteries, Power Supply and Accessories
- Battery Cell Holders
- Battery Charger Module
- Bluetooth
- Breadboard
- Breakout Boards
- Brush Motor Drivers
- Burg Strip
- Buzzer
- Buzzer / Speaker
- Capacitor
- Caster Wheel
- Chargers & Charging Modules
- CNC
- Comparator ICs
- Connectors
- Controller
- Counter ICs / CMOS Logic ICs
- Cutters and Tweezers
- DB9/DB15/DB25 Connectors
- DC Geared Motors
- DC Motors
- DC Pumps and Accessories
- Development Boards
- Digital Multimeters
- Digital-to-Analog Converter (DAC) IC
- Diodes
- DIP
- DIP LED
- Display for Arduino
- Displays
- DIY & Maker Kits
- DIY Educational Kits Sale
- Drone Accessories
- Drone Frame and Parts
- Drone Motors
- Drone Parts
- Drone Transmitter and Receiver
- Dust Particle Sensor
- ECG / Heart Beats Sensor
- Electronic Components
- Electronic Modules and Displays
- Electronic Switches/Keypads Modules
- Embedded Controllers
- Emergency Switch
- Enclosures & Control Boxes
- Encoders
- End Stop / Limit Switch Sensor
- Espressif
- Fans & Blowers
- Fans & Blowers
- Finger Print Sensor
- Flight Controller & Accessories
- FORCE / FLEX AND PRESSURE
- FRC Connectors
- Fuses & Fuse Holders
- Gas & Dust Sensor
- Gas Sensor
- Gas Sensors
- Gate ICs
- Generic Mini DC Pumps
- Glue Gun & Sticks
- GPS
- GSM/GPRS
- GSM/GPRS
- HDMI Cables
- Heat Sinks
- IGBT
- Inductive Proximity Sensor
- Integrated Circuits
- Interface IC
- IoT and Wireless Modules
- IR/TSOP/PIR MOTION SENSOR
- Jumper Dupont Wires
- keypad
- KIT
- LCDs
- LED
- LED Dot Matrix Display
- LED MODULES
- Lidar Sensor
- Light Sensors
- Limit Switch
- Linear Actuator
- Linear voltage regulator IC
- Lithium ion
- Lithium Polymer (Lipo) Battery Pack
- Load Sensor
- Logic IC
- Measurement & Workbench Tools
- Mecanum Wheels
- Mechanical Parts, Measurement & Workbench Tools
- Metal sensor
- Microcontroller IC
- Mini Fit Connector
- Miscellaneous Tools
- Motor Couplings
- Motor Driver IC
- Motor drivers
- Motors
- Motors | Drivers | Pumps | Actuators
- Multi-Chemistry Batteries
- Multimeter Accessories
- N20 Micro Geared Motors
- NODEMCU
- Non Rechargeable Batteries
- NPK Sensor
- Optocouplers
- Other Cell Holders
- Other Development Boards
- Other ESP WIFI Modules
- Other ESP WIFI Modules
- Other Metal Geared Motors
- Other Wires & Cables
- Passive / Active Components
- PIC Programmer Development Board
- Piezo Buzzers
- Planetary Gear Motors
- Potentiometer Module
- Power management IC
- Power Management ICs
- Programmers / Interface Modules
- Proximity Sensors
- Raspberry Pi
- Raspberry Pi Boards
- Relays
- Resistor
- RF
- RFID
- Robot Wheels
- Round Shell Connectors
- RTC Module
- Screwdrivers and Sets
- Sensors/Modules
- Servo Motor
- Servo Motor Controller
- Signal Generator Module & Oscilloscopes
- Single Relays
- SMD LED
- Solar Panel
- Soldering Accessories
- Soldering Accessories
- Soldering Tools
- Sound Sensor and Modules
- Spur Gear Motors
- Step UP-Down Modules
- Stepper Motor Drivers
- STM32 MICROCONTROLLER
- Switch
- Temperature & Humidity Sensors
- Thermo-electric cooler
- Timer Circuits
- TIMER IC
- Tools & Equipments
- Ultrasonic / LiDAR Sensors
- Ultrasonic Humidifier Module
- USB Cables
- USB Interface Module
- Vibration and Motion Sensor
- Voltage / Current (AC-DC)
- Voltage Regulators ICs
- Water / Flow / PH / Moisture
- Wheels
- WIFI
- Wireless Modules
- Wires & Cables
- Workbench Tools
Raspberry Pi Zero 2 W
Available on backorder
₹2,054.00 (Incl. GST)Specifications:
Model: Raspberry Pi Zero 2 W
CPU: 1 GHz quad-core Arm Cortex-A53
RAM: 512 MB
Wireless: Wi-Fi (2.4 GHz) and Bluetooth 4.2
Ports: Mini HDMI®, micro USB, microSD slot
Camera: CSI-2 connector
Raspberry Pi Zero W Pre-Soldered Header
Out of stock
₹1,731.00 (Incl. GST)Specifications:
Fully HAT compatible
40pin GPIO (Unpopulated)
Stream and watch Hi-definition video output at 1080P
512MB RAM and Micro SD Slot for OS
Tiny Current Draw ~ 140mA at 5V!
Mini-HDMI for Video
Micro-USB OTG Host for Data and Power
Micro-CSI Camera Port
On-Board Bluetooth and WiFi.
RS232 To TTL Serial Converter Module
In stock
₹49.00 (Incl. GST)Specifications:
IC Chip: MAX3232
Operating Voltage: 3.3-5.5V
Operates up to 250 kbit/s
Power supply: external dc
interface: TXD, RXD, GND, VCC
Dimensions: 33mm*32mm*16mm
SanDisk Micro SDXC USH-I 64GB Class 10 Memory Card
In stock
₹625.00 (Incl. GST)It has a memory size of 64GB
It has a data transfer rate of 98Mb/sec.
It is a Class 10 micro SD card.
The high speed SD Card is compatible with mobile phones and even Raspberry pi.
It has 5 years of manufacturing defect Warranty given by SanDisk.
The SD card does not come with pre-installed NOOBS. If you want the SD card to be installed with NOOBS, then select the OS given in the drop down.
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
In stock
₹421.00 (Incl. GST)Features:
5V power supplied by a USB connector
USB 2.0 full speed compatible interface
USB standard A to mini B cable
1.65V to 5.5V application voltage supported on SWIM interface
SWIM low speed and high-speed modes supported
STM32F103C8T6 Minimum System Board Micro-computer STM32 ARM Core Board
In stock
₹189.00 (Incl. GST)Specifications:
2.0-3.6V power, I/O.
Operating voltage:3.3V
Analog inputs:10
Digital I/O pins:37
DC source/sink from I/O pins:6mA
Flash memory (KB):64/128
SRAM:20KB
Frequency (clock speed):72MHz max.
Communication:I2C, SPI, UART, CAN, USB
STM32F401CCU6 Minimum System Board Microcomputer STM32 ARM Core Board
Available on backorder
₹304.00 (Incl. GST)Specifications:
Item Type: Other Board
Based On: STM32 Based
USB Connector: Type-C
Length (mm): 53
Width (mm): 20
Height (mm): 5
Weight (g): 7
STM32F411CEU6 Minimum System Board Microcomputer STM32 ARM Core Board
Available on backorder
100% Brand new and high-quality STM32 Board
Model: STM32F411CEU6
Core: ARM 32 Cortex-M4 CPU.
Debug mode: SWD.
72MHz work frequency.
512K flash memory, 128K SRAM.
TJA1050 CAN Controller Bus Driver Interface Module
In stock
₹77.00 (Incl. GST)Features :
Onboard TJA1050 CAN controller interface chip
Chip commonly used pin has led, convenient connection to use
Pin 5 v to the power supply
PCB board size: 22 (mm) x11.5 (mm)
Fully compatible with the ISO 11898 standard
High speed (up to 1 Mbaud)
Very low Electro-Magnetic Emission (EME)
Differential receiver with wide common-mode range for high Electro-Magnetic Immunity (EMI)
An unpowered node does not disturb the bus lines
Transmit Data (TXD) dominant time-out function
A silent mode in which the transmitter is disabled
Bus pins protected against transients in an automotive environment
Input levels compatible with 3.3 V and 5 V devices
Thermally protected
Short-circuit proof to the battery and to ground
TTL to RS485 Power Supply Converter Board 3.3V 5V Hardware Auto Control Module
In stock
₹95.00 (Incl. GST)Specifications:-
Operating Voltage (VDC):3 ~ 30
Compatible Signals:3.3V and 5.0V
Working Temperature Range (°C):-40 to 85
Baud Rate:110 to 256000bps
Support multi-machine communication, at least 40 nodes can be connected to the same network
can be hot-swapped and there will be no signal thrombosis.
With standard 2.54 pitch pin headers
UNO R3 CH340G ATMega328P compatible with arduino + Cable
In stock
₹280.00 (Incl. GST)A basic Arduino Kit including everything to get started.
It includes a quality proven Arduino Cable.
Microcontroller ATmega328 (SMD) – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Digital I / O Pins 14 (of which 6 provide PWM output)
Analog Input Pins: 6
Uno R3 CH340G ATMega328P Development Board Compatible with Arduino
In stock
₹230.00 (Incl. GST)Specifications:
Microcontroller ATmega328 (SMD) – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 5-20V
Digital I / O Pins 14 (of which 6 provide PWM output)
Analog Input Pins: 6