1 Channel 12V Low Level Trigger Relay Module for Arduino
In stock
₹70.00 (Incl. GST)Specifications
250VAC 10A, 28VDC 10A
Indicator LEDs
12V control voltage
Module size: 43mm x 17mm
1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator
In stock
₹78.00 (Incl. GST)Specifications:
Voltage range: DC6V – 28V
Current range: Within 3A
Switch function: None
Speed range: 0-100%
Dimension: 65 x 30 x 15mm
Weight: 25 g
12V Sugar Cube Relay
In stock
₹25.00 (Incl. GST)Specification:
Product type: SPDT sugar cube relay
Voltage: 12v
Number of pins: 5
Pin type: through hole
Package contains: 1 X sugar cube SPDT relay switch
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In stock
₹244.00 (Incl. GST)Specifications:
Adjustable frequency PWM up to about 1.6 KHz
12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
Configurable push-pull or an open-drain output
The output enable pin to quickly disable all the outputs
Terminal block for power input
Reverse polarity protection on the terminal block input
Green power-good LED
3V 6V 12V 24V 35V PWM DC Motor Speed Regulator
In stock
₹79.00 (Incl. GST)Specifications:
Operating voltage: DC 4.5V- DC 35V
Output current: 0-5A
Output power: 90W (max)
Quiescent current: 7uA (standby)
PWM duty cycle: 1% -100%
PWM frequency: 20khz
Size: 30mm x 26mm x 14mm
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In stock
₹542.00 (Incl. GST)Specifications
Module Type: 4 Channel Solid State Relay
Control Voltage (Input): 5V DC
Control Signal Current: 5–12 mA per channel
Load Voltage (Output): 100–240V AC
Load Current (Output): Up to 2A per channel
Trigger Voltage: 0–2.5V (Low), 3–5V (High)
Isolation: Opto-isolated inputs for protection
Dimensions: ~ 73mm × 55mm × 25mm
5V 1 Channel Relay Module
In stock
₹45.00 (Incl. GST)Specification
Trigger Voltage: 5 VDC
Trigger Current : 20 mA
Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
Single Pole Double Throw (SPDT) Configuration
Power supply indicator lamp
5V 1 Channel Relay Module (with Optocoupler)
In stock
₹68.00 (Incl. GST)Features
Operating Voltage(VDC) : 5V
Max. Current(mA) : 0.20 mA
Current Capacity : 10A
Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
5V 2Channel Relay Module (with Optocoupler)
In stock
₹72.00 (Incl. GST)Features
High current relay, AC250V 10A, D 30V 10A
2 LEDs to indicate when relays are on
Supply voltage – 3.75V to 6V
Trigger current – 5mA
Current when relay is active – ~70mA (single), ~140mA (both)
Relay maximum contact voltage – 250VAC, 30VDC
Relay maximum current – 10A
Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
5V 4 Channel Relay Module (with Optocoupler)
In stock
₹135.00 (Incl. GST)Specifications:
1. Supply voltage – 3.75V to 6V
2. Trigger current – 5mA
3. Current when the relay is active – ~70mA (single), ~300mA (all four)
4. Relay maximum contact voltage – 250VAC, 30VDC
5. Relay maximum current – 10A
6. Triode drive, increasing relay coil
7. High impedance controller pin
8. Pull-down circuit for avoidance of malfunction
9. Power supply indicator and Control indicator lamp
10. Power supply and relay instructions, lit, disconnect is off
11. Input signal, signal, common Terminal and start conducting
12. Useful for appliance control
13. DC or AC signal, control, you can control the 220V AC load
5V 7A Sugar Cube Relay
In stock
₹25.00 (Incl. GST)Features:
Trigger Voltage (Voltage across coil) : 5V DC
Trigger Current (Nominal current) : 70mA
Maximum AC load current: 7A @ 240/125V AC
Maximum DC load current: 7A @ 30/28V DC
Compact 5-pin configuration with plastic moulding
Operating time: 10msec Release time: 5msec
Maximum switching: 300 operating/minute (mechanically)
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
In stock
₹113.00 (Incl. GST)Specifications:
Operating voltage: 6-30V
Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
Optocoupler Isolation.