Showing 13–24 of 1105 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
1.2KΩ (1K2) 1/4 Watt Carbon Film Resistor (DIP) – 1 Pc
In stock
₹2.00 (Incl. GST)SPECIFICATIONS
Resistance: 1.2KΩ (1K2 / 1200 ohms)
Power Rating: 1/4 Watt (0.25W)
Tolerance: ±5%
Type: Carbon Film / Through-Hole (DIP)
Mounting: Axial Lead
Quantity: 1 pc
Color Code: Brown – Red – Red – Gold
1.2KΩ (1K2) 1/4 Watt Carbon Film Resistor (DIP) – 5 Pc
In stock
₹6.00 (Incl. GST)SPECIFICATIONS
Resistance: 1.2KΩ (1K2 / 1200 ohms)
Power Rating: 1/4 Watt (0.25W)
Tolerance: ±5%
Type: Carbon Film / Through-Hole (DIP)
Mounting: Axial Lead
Quantity: 5 pc
Color Code: Brown – Red – Red – Gold
1.3 Inch IIC 128×64 OLED Display Module 4 Pin – Blue
In stock
₹289.00 (Incl. GST)Specifications:
Display Colour: Blue
Resolution : 128×48 pixels
Driver IC: SH1106
Fully Compatible with Arduino
Working temperature: -30°C ~ 70°C
Factory configured for SPI protocol (can be easily changed to IIC)
Please note: Product Images are shown for illustrative purposes only and may differ from actual product.
1.3 Inch White OLED Display Module – I2C/IIC 4-Pin 128×64 Screen (White)
In stock
₹169.00 (Incl. GST)-
Specifications
-
Display Size: 1.3 Inch
-
Display Type: OLED
-
Display Color: White
-
Resolution: 128 × 64 pixels
-
Interface: I2C / IIC
-
Pins: 4-Pin (VCC, GND, SCL, SDA)
-
Driver IC: SH1106 / SSD1306 Compatible
-
Operating Voltage: 3.3V – 5V
-
Viewing Angle: Wide
-
Power Consumption: Low
-
Mounting Type: Module / Through-Hole
-
Typical Module Size: Approx. 35 × 34 mm
-
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC DC Boost Converter Module Step Up Board
In stock
₹48.00 (Incl. GST)Input voltage 1.5-4.2V output voltage 5V
Maximum output current: 500 mA
Starting voltage 0.8V, output current 10mA
Operating frequency: 150KHZ
Typical conversion efficiency: 85%
1.8 Inch TFT LCD Module 128 x 160 with 4 IO SPI
In stock
₹390.00 (Incl. GST)Specifications:
Display Size: 1.8″
Driver IC: ST7735
Input Voltage (V): 3.3 to 5
Pixel Resolution: 128 x 160
PCB Size (mm): 62×38 (LxW)
Interface Type: SPI
1×40 Pin 2.54MM Berg Strip Male connector
In stock
₹4.00 (Incl. GST)Specifications:
Pins: 40
Pin Spacing: 2.54mm
Weight: 15 gm.
10 kg.cm 180 Deg MG996R Servo Motor
In stock
₹295.00 (Incl. GST)Specifications:
Operating voltage: 4.8 V a 7.2 V
Running Current 500 mA – 900 mA (6V)
Stall Current 2.5 A (6V)
Temperature range: 0 °C – 55 °C
Control System: Analog
Operating Angle: 180degree
Required Pulse: 900us-2100us
Direction: CCW
Operating speed: 0.17 s/60º (4.8 V), 0.14 s/60º (6 V)
Dead band width: 5 μs
Wire length: 30cm
Connector: 3 pin ‘S’ type female header
Weight: 55 g
Dimension: 40.7 x 19.7 x 42.9 mm approx.
Stall torque: 9.8 kgf·cm (4.8 V ), 11 kgf·cm (6 V)
10 RPM Johnson Motor – 30mm Shaft Length
In stock
₹415.00 (Incl. GST)SPECIFICATIONS
Motor Type: Johnson DC Geared Motor
Rated Speed: 10 RPM (approx.)
Operating Voltage: 6V – 18V DC (12V nominal)
Shaft Length: 30mm
Shaft Diameter: 6mm (D-shaped)
Motor Diameter: ~37mm
Torque: High torque at low speed
Mounting: Compatible with motor brackets and couplers
Applications: Robotics, conveyors, automation, DIY projects
10 x 10 cm General Purpose Zero PCB Prototype Board – Single Sided
In stock
₹50.00 (Incl. GST)Specifications:
-
Board Size: 10 cm x 10 cm
-
Type: Single-sided PCB
-
Material: Phenolic / FR2 laminate
-
Hole Pitch: 2.54 mm (standard spacing)
-
Hole Diameter: ~1 mm
-
Copper Layer: One side
-
Color: Brown
10 x 10 cm Universal PCB Prototype Board – Double Sided
In stock
₹71.00 (Incl. GST)Specifications:
-
Board Size: 10 cm x 10 cm
-
Type: Double-sided PCB
-
Material: FR4 (fiberglass epoxy laminate)
-
Hole Pitch: 2.54 mm (standard spacing)
-
Hole Diameter: ~1 mm
-
Copper Layer: Dual layer
-
Color: Green
100 RPM Johnson Motor – 30mm Shaft Length
In stock
₹415.00 (Incl. GST)SPECIFICATIONS
Motor Type: Johnson DC Geared Motor
Rated Speed: 100 RPM (approx.)
Operating Voltage: 6V – 18V DC (12V nominal)
Shaft Length: 30mm
Shaft Diameter: 6mm (D-shaped)
Motor Diameter: ~37mm
Torque: Medium torque with higher speed than 60 RPM motor
Mounting: Suitable with motor brackets and couplers
Applications: Robotics, conveyor systems, automation, DIY projects