Showing 1–12 of 1091 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
0.01µF Ceramic Capacitor
In stock
₹1.00 (Incl. GST)Specifications:
Capacitance: 0.01µF (10nF / 10,000pF)
Type: Ceramic Capacitor
Tolerance: ±5% / ±10% (varies by type)
Mounting Type: Available in Through Hole or SMD
Dielectric Type: C0G/NP0 or X7R (depending on version)
Applications: Filters, decoupling, timing, coupling, and noise suppression circuits
0.25W 16 Ohms Type Round Plastic Shell Magnet Speaker
In stock
₹28.00 (Incl. GST)Specifications:
Resistance: 16 ohms
Power: 0.25 W
Speaker Diameter: ~35MM
Thickness: ~07mm
0.28 Inch 0-100V Three Wire DC Voltmeter
In stock
₹70.00 (Incl. GST)Operating Voltage: 0-100 VDC
Measuring Voltage: 0 to 100 VDC
It is a 3-wire display.
LED Color: BLUE
Current Consumption : < 20 mA.
Accuracy: 0.1 V.
Refresh Speed : Approx. 200mS/time.
The display on Voltage: 3 V.(but not measure accurately up to 3.6V).
0.28inch 3.5-30V Two Wire DC Voltmeter Blue
In stock
₹60.00 (Incl. GST)Specifications
Type Voltmeter
Color Black
Power Supply 30
Body Material Plastic casing with electronic components
Power Source DC
0.91 inch IIC 4-Pin OLED Display Module SSD1306 – White
In stock
₹185.00 (Incl. GST)Specifications:
Size: 0.91 inch
Resolution: 128 x 32
Controlling Chip: SSD1306
Display Area: 22.384 x 5.584mm
Driving Voltage: 3-5V
Operating Temperature: -40~70 celsius
Interface Type: IIC
Light Color: White
0.96inch 128×64 OLED 4 Pin Display Module Arduino Compatible (Blue)
In stock
₹169.00 (Incl. GST)Specifications:
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Mini Size: 2.7 x 2.8cm
Only Need 2 I/O Port Control
Full Compatible with Arduino
Working temperature: -30°C ~ 70°C
Module volume: 32 x 35.5 x 4mm
02DX Self Adjusting Wire Cutter – Stripper
In stock
₹288.00 (Incl. GST)Flawless Finish
Optimum Strength
Best Quality
Cutting range of wire 0.5mm to 2.5mm & 6mm
Also Suitable for Electronic, Aviation & Automobile sectors
1 Channel 12V Low Level Trigger Relay Module for Arduino
In stock
₹70.00 (Incl. GST)Specifications
250VAC 10A, 28VDC 10A
Indicator LEDs
12V control voltage
Module size: 43mm x 17mm
1 channel 5V 10A Relay Control Board Module with Optocoupler
In stock
₹62.00 (Incl. GST)Specifications:
Channel: 1 channel
Relay Voltage: 5V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
1-Inch Single Digit 7-Segment LED Display Module
In stock
₹40.00 (Incl. GST)Specifications
Type 7 segment
Display Type 7 Segment
Battery Type AA
Color Black
Shape LED Display, 7 Segment
Material Plastic
D