Showing 289–300 of 372 results
Shop
PT1000-S Waterproof 1m 30mm Stainless Steel Pole Probe Temperature Sensor
In stock
₹158.00 (Incl. GST)Model number: FTARP05 series.
Mounting form Polish rod probe
The Probe material: Stainless steel.
Probe diameter: 4mm.
Length of the probe: 30mm.
Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated).
Accuracy ±(0.3°C+0.5%|t|).
Thermal response time: <0.5 sec.
R307S Optical Fingerprint Reader Sensor Module
In stock
₹866.00 (Incl. GST)Specifications:
Supply voltage: DC 4.2 ~ 6.0V
Working current: 50mA (typical)
Peak current: 80mA
Fingerprint image input time: <0.3 seconds
Window area: 14×18 mm
Matching mode:1: 1 and 1:N
Characteristic file size: 256 bytes
Template size: 512 bytes
Storage capacity: 1000 pieces
Security Level: 5 (from low to high: 1,2,3,4,5)
Fake rate (FAR): <0.001%
Refusal rate (FRR): <1.0%
Search time: <1.0 seconds (1: 1000 hours, mean value)
Host interface: UART USB1.1
Baud rate (UART): (9600xN) bps Where N = 1 ~ 12 (default N = 6, ie 57600bps)
Compatible with Raspberry Pi, Arduino
Raindrop Water drop Sensor
In stock
₹60.00 (Incl. GST)Specifications:-
Function: rain detection and rainfall intensity measurement and monitoring
Weight: aprx 8g
PCB or module size: 30mm x 16mm
Control board size: 54mm x 40mm
Colour and shape: as shown in image
Raspberry Pi 4 Model-B with 4 GB RAM
In stock
Original price was: ₹5,649.00.₹5,310.00Current price is: ₹5,310.00. (Incl. GST)Specifications
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
1GB, 2GB or 4GB LPDDR4-2400 SDRAM (depending on model)
2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
Gigabit Ethernet
2 USB 3.0 ports; 2 USB 2.0 ports.
Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
2 × micro-HDMI ports (up to 4kp60 supported)
2-lane MIPI DSI display port
2-lane MIPI CSI camera port
4-pole stereo audio and composite video port
H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
OpenGL ES 3.0 graphics
Micro-SD card slot for loading operating system and data storage
5V DC via USB-C connector (minimum 3A*)
5V DC via GPIO header (minimum 3A*)
Power over Ethernet (PoE) enabled (requires separate PoE HAT)
Operating temperature: 0 – 50 degrees C ambient
* A good quality 2.5A power supply can be used if downstream USB peripherals consume less than 500mA in total.
Raspberry Pi Zero 2 W with Header
In stock
₹2,054.00 (Incl. GST)Specifications:
Model: Raspberry Pi Zero 2 W
CPU: 1 GHz quad-core Arm Cortex-A53
RAM: 512 MB
Wireless: Wi-Fi (2.4 GHz) and Bluetooth 4.2
Ports: Mini HDMI®, micro USB, microSD slot
Camera: CSI-2 connector
Raspberry Pi Zero W Pre-Soldered Header
Out of stock
₹1,731.00 (Incl. GST)Specifications:
Fully HAT compatible
40pin GPIO (Unpopulated)
Stream and watch Hi-definition video output at 1080P
512MB RAM and Micro SD Slot for OS
Tiny Current Draw ~ 140mA at 5V!
Mini-HDMI for Video
Micro-USB OTG Host for Data and Power
Micro-CSI Camera Port
On-Board Bluetooth and WiFi.
RCWL-0516 Microwave Radar Sensor
In stock
₹45.00 (Incl. GST)Specifications:
Input Voltage – 4V to 28V
Operating current – 3mA (max.)
Operating frequency – 3.2GHz
Transmission power – 30mW (max.)
Regulated output voltage – 3.3V, max. 100mA
Sensing distance – 5 to 7 meters
RF Transmitter Receiver Module 433MHz Wireless Link Kit For Arduino FS1000A
In stock
₹90.00 (Incl. GST)Specifications:
Wide input supply (2.5 V to 12V)
Easy to integrate (V+, GND, and Data)
The device in deep sleep mode when Data pin is grounded
Very small dimension.
RFID Reader/Writer RC522 SPI S50 with 13.56MHz RFID Card and Tag
In stock
₹90.00 (Incl. GST)Specifications:
Operating Voltage: 2.5V to 3.3V
Operating Current:13-26mA
Idle Current:10-13mA
Peak current: <30mA
Sleep current: <80uA
Operating Frequency: 13.56MH
Communication: SPI, I2C protocol, UART
RGB LED – 5mm – Common Anode
In stock
₹6.00 (Incl. GST)Specifications:-
LED Configuration : Common Anode
Forward Voltage : 2 ~ 5 VDC
Forward Current : 20 mA
Led Diameter : 5mm
LED Type : RGB
No of Pin : 4
Mounting Type : Through Hole
RGB LED – 5mm – Common Cathode
In stock
₹6.00 (Incl. GST)Specifications:-
LED Configuration : Common Cathode
Forward Voltage : 2 ~ 5 VDC
Forward Current : 20 mA
Led Diameter : 5mm
LED Type : RGB
No of Pin : 4
Mounting Type : Through Hole