Showing 49–60 of 372 results
Shop
400 Point Breadboard
In stock
₹50.00 (Incl. GST)Specifications:
Body Material: ABS Plastic (White or Transparent) with color printed legend
ABS Heat Distortion Temp is 84°C / 183°F
Hole Style: Square Wire Holes
Hole Pitch: 0.1″ / 2.54mm
Spring Clip Contact: Phosphor Bronze with Plated Nickel Finish
Contact Life: 50,000 insertions
Rating: 36 Volts, 2 Amps
Insertion Wire Size: 21 to 26 AWG wire, or 0.025″ square post headers 0.016 – 0.028″ / 0.4 – 0.7mm diameter
Backing: Peel-able adhesive tape for attaching to a surface Metal back plate (0.031 “/ 0.8mm thickness)
Internal Connections: 60 vertical columns in the circuit area and 4 horizontal “rails” as distribution strips for power and ground
4000W High-Power Thyristor Electronic Regulator, Dimming Speed Regulation
In stock
₹255.00 (Incl. GST)Input Voltage: 220V AC.
Maximum Power: 4000W.
Adjustable Voltage: 0-220V AC.
AC frequency: 50-60Hz.
Size(LxWxH): Approx 85 x 55 x 38 mm.
4S 14.8V 10A BMS Li-ion 18650 Battery Protection Board
In stock
₹161.00 (Incl. GST)Specifications :
Over charge protection voltage : 4.225±0.050 V
Over charge recovery voltage : 4.125±0.050 V
Over charge protection delay time : 1S
Continuous Discharge Current :10A
Over discharge protection voltage : 2.70±0.050 V
Over discharge recovery voltage : 3.00±0.050 V
Over discharge protection delay time : 1S
Over current protection current : 14A
Short circuit delay time : 300uS
PCM Size : 35 mm * 35 mm.
4X4 Matrix Membrane Keypad
In stock
₹40.00 (Incl. GST)Specifications:
Operating Voltage (V): 12 DC
Operating temperature: 32 to 122 °F
Maximum Rating: 24 VDC, 30 mA
Keypad Dimensions: 6.9 cm X 7.9 cm
Cable dimensions: 2.0 cm X 8.8 cm
Maximum rating: 24 VDC, 30 mA
Pin counts: 8
Compatible with: Arduino, controller, processor etc
5.5 x 2.1mm Female DC Power Jack PCB Mount
In stock
₹10.00 (Incl. GST)Specification:
Plug Type: 5.5 x 2.1mm
Rating : DC 30V 3A
Insulation Resistance : ≥100MΩ (DC250V)
Insertion And Extraction Force : 3 – 20N
5.5×2.1mm DC Power Jack Socket Panel Mount (Female)
In stock
₹10.00 (Incl. GST)Features:
Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
Supports DC Power Jack: 2.1 x 5.5 mm
Diameter: 14mm
50MM, 15mm/S, 64N, 6V Mini Linear Actuator
In stock
₹2,708.00 (Incl. GST)Specifications:
Input Voltage: 6V DC
Stroke Length: 50mm
Speed: 15mm/s
Max Load Capacity: 64N
Duty Cycle: 25% (max 1 minute continuous use, 3 minutes rest)
Operating Temperature: -20°C to +65°C
Protection Class: IP54 (resistant to dust and splashing water)
Connection: 2-wire configuration for easy installation
5mm Clear Orange LED
In stock
₹1.80 (Incl. GST)Specifications:
Forward voltage: DC3V-3.2V
Current: 20mA
Lens: 5mm diameter / transparent / round
Emitting color: blue (455-465nm)
Luminous intensity:7000-8000mcd
Viewing angle: 30 degree
Polarity: anode(+) (longer part), cathode(-) (shorter part)
5MM Red Flicker Led
In stock
₹1.80 (Incl. GST)Specifications:
Color: Red
Peak Wavelength: 590 nm
Package: Round 5 mm (T-1 3/4)
Lens type: Water-clear
Viewing angle: 20 degrees
Intensity: 2200 mCd typ. at 20 mA
DC forward current: 30 mA
Forward voltage (typical): 2.1 V
Lead-free (RoHS compliant)
Manufacturer: Betlux Electronics
Manufacturer part number: BL-L513UYC-B-S3
5MM Red On-Off Led
In stock
₹1.80 (Incl. GST)Specifications:
Colour: Red
Peak Wavelength: 590 nm
Package: Round 5 mm (T-1 3/4)
Lens type: Water-clear
Viewing angle: 20 degrees
Intensity: 2200 mCd typ. at 20 mA
DC forward current: 30 mA
Forward voltage (typical): 1.9V – 2.1 V
Lead-free (RoHS compliant)
5mm Red/Yellow-Green Bi-Colour (Common Cathode) 3 Pin LED Clear Lens
In stock
₹6.00 (Incl. GST)
5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
In stock
₹284.00 (Incl. GST)Resolution: 5 MP
Interface Type: CSI(Camera Serial Interface)
Dimensions: 25x23x8 (LxWxH) mm
Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
Fully Compatible with Raspberry Pi 3 and 4 Model B
Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.