Shop

Multitec 150b Wire Stripper and Cutter

SKU: Stripper

In stock

59.00 (Incl. GST)
  1. An improved handle for extra comfort and grip.
  2. Sharp cutting edge.
  3. Suitable for industrial applications.
  4. H-8mm  L-13cm W-78 gm.
  5. Fast cutting action with black oxide finish.
  6. Strips and cuts wire 12-24 gauge.
  7. Sharp cutting edges for all industrial uses.

MUR1560 Ultra Fast Diode 600V 15A

SKU: D154

In stock

71.00 (Incl. GST)

Specification:

  • Model: MUR1560

  • Type: Ultra Fast Rectifier

  • Voltage Rating: 600V

  • Current Rating: 15A

  • Reverse Recovery Time: Fast

  • Package: TO-247

N20 6V 200 RPM Micro-Gear DC Motor

SKU: SB-157

In stock

269.00 (Incl. GST)

Specifications:
Voltage: 6V
No-load Speed: 200 RPM
Stall Torque: 0.3-0.5 kg.cm
Stall Current: 1.5-2.5A
No-load Current: 20-70mA
Output Shaft Diameter: 3mm
Motor Dimensions: 12mm x 10mm x 15mm
Gearbox Length: 9mm
Weight: 10-12 grams

N20 6V 600 RPM Micro-Gear DC Motor

SKU: SB-158

In stock

Original price was: ₹269.00.Current price is: ₹249.00. (Incl. GST)

Specifications:
Voltage: 6V DC
RPM: 500 RPM (Revolutions Per Minute)
Torque: Lower torque compared to slower RPM models, but sufficient for lightweight applications
Current: Usually around 40-150mA (no load) and up to 1A (stall)
Shaft Diameter: Typically around 3mm
Shaft Length: Approximately 9mm
Gearbox Type: Metal gears for enhanced durability
Dimensions: Similar to other N20 motors, around 12mm x 10mm x 26mm

Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)

SKU: SB-003a

In stock

240.00 (Incl. GST)

Operating Voltage (logic level): 5V
With USB cable and Soldered Connector
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.

Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)

SKU: SB-003

In stock

204.00 (Incl. GST)

Specifications:
Operating Voltage (logic level): 5V
With Soldered Connector
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.

NANO IO Shield Expansion Board For Arduino Screw Terminals

SKU: SB-011

Out of stock

159.00 (Incl. GST)

Specifications:
Compatible with Arduino NANO
All digital and analog pins breakout
Compact size.
Leads all pins out, convenient for wiring and doing experiments.
Dimensions: 53 x 36 x 12 (LxWxH) mm.
Weight: 22 gm.

NCE55H12 N-Channel Power MOSFET – 55V, 120A, TO-220 / TO-252

SKU: D153

In stock

71.00 (Incl. GST)

SPECIFICATION

  • Transistor Type: N-Channel MOSFET

  • Package: TO-220 / TO-252 (varies by model)

  • Drain-Source Voltage (VDS): 55V

  • Continuous Drain Current (ID): 120A

  • Gate-Source Voltage (VGS): ±20V

  • RDS(on): 4.5mΩ – 6mΩ (Typical)

  • Gate Threshold Voltage: 2V – 4V

  • Power Dissipation: 140W (approx.)

  • Operating Temperature: –55°C to +175°C

  • Mounting Type: Through-Hole / SMD

  • Switching: Fast switching, low gate charge

NCE65TF099T – 650V 38A N-Channel Power MOSFET

SKU: odd ic 4

In stock

207.00 (Incl. GST)

Brand -NCE
Part Number -NCE65TF099T
Mounting Type -DIP
Current -38A
Voltage -650V

NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V

SKU: SB-140

In stock

75.00 (Incl. GST)

Specifications:

Module based on the NE555 chip.
Input voltage: DC 12V
Adjustable time: 0-10 s
AC Control voltage: 250V/max. 10A
DC Control Voltage: 30V/max. 10A
Max. load: 2200W

NE555 delay monostable switch module Time delay switch Delay on vehicle electrical delay 5V

SKU: SB-133

In stock

112.00 (Incl. GST)

Specification:

Module based on the NE555 chip.
Input voltage: DC 5V
Adjustable time: 0-10 s
AC Control voltage: 250V/max. 10A
DC Control Voltage: 30V/max. 10A
Max. load: 2200W

NE555 SMD IC – Precision Timer IC (SOIC-8 / SMD Package)

SKU: SIC-040

In stock

10.00 (Incl. GST)

Specifications

  • IC Number: NE555

  • IC Type: Precision Timer IC

  • Operating Modes: Monostable, Astable, Bistable

  • Supply Voltage: 4.5V to 16V

  • Output Current: Up to 200mA

  • Timing Range: Microseconds to hours (with external RC)

  • Output Type: Digital

  • Package Type: SMD (SOIC-8)