Shop

Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino

SKU: S-025

In stock

50.00 (Incl. GST)

Operating voltage: 3.3 to 5VDC
Ball Rolling type of tilt sensor.
This small module is easy to use.
A fixed bolt hole for easy installation
Wide voltage LM393 comparator

TJA1050 CAN Controller Bus Driver Interface Module

SKU: SB-114

In stock

77.00 (Incl. GST)

Features :
Onboard TJA1050 CAN controller interface chip
Chip commonly used pin has led, convenient connection to use
Pin 5 v to the power supply
PCB board size: 22 (mm) x11.5 (mm)
Fully compatible with the ISO 11898 standard
High speed (up to 1 Mbaud)
Very low Electro-Magnetic Emission (EME)
Differential receiver with wide common-mode range for high Electro-Magnetic Immunity (EMI)
An unpowered node does not disturb the bus lines
Transmit Data (TXD) dominant time-out function
A silent mode in which the transmitter is disabled
Bus pins protected against transients in an automotive environment
Input levels compatible with 3.3 V and 5 V devices
Thermally protected
Short-circuit proof to the battery and to ground

TowerPro MG90S Micro Digital Servo Motor (180° Rotation)

SKU: SB-160

In stock

119.00 (Incl. GST)

Specifications

Model: MG90S
Weight: 13 gm
Operating voltage: 4.8V~ 6.6V
Servo Plug: JR
Stall torque @4.8V : 1.8kg-cm
Stall torque @6.6V : 2.2kg-cm

TowerPro MG995 Plastic Gear Servo Motor (180° Rotation)-Standard Quality

SKU: SB-161

In stock

283.00 (Incl. GST)

Specifications:

Weight : 30g
Dimension : 40.7 × 19.7 × 42.9 mm
Operating Speed (4.8V no load): 20sec / 60 deg
Operating Speed (6.0V no load): 16sec / 60 deg ( no load)
Stall Torque (4.8V): 2kg/cm
Stall Torque (6.0V): 3kg/cm
Operation Voltage : 4.8 – 7.2Volts
Gear Type: Plastic
Stable and shock proof double ball bearing design
Dead band width: 5 µs
Temperature range: 0 ºC – 55 ºC.
Control System: Analog
Operating Angle: 120degree
Required Pulse: 900us-2100us

TowerPro SG90 1.2kgCm 180 Degree Rotation Servo Motor

SKU: SB-159

In stock

94.00 (Incl. GST)

Specifications:

Operating Voltage is +5V typically
Torque: 2.5kg/cm
Operating speed is 0.1s/60°
Gear Type: Plastic
Rotation : 0°-180°
Weight of motor : 9gm
Package includes gear horns and screws
Cable Length: 15 cm

TowerPro SG90 Continuous Rotation 360 Degree Servo Motor

SKU: SB-159B

Out of stock

135.00 (Incl. GST)

Specifications:
Model: SG90
Weight: 9 gm
Operating voltage: 3.0V~ 7.2V
Servo Plug: JR
Stall torque @4.8V : 1.2kg-cm

TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB BMS

SKU: SB-142A

In stock

23.00 (Incl. GST)

Specifications:-

Input interface: Mini USB.
Current: 1A adjustable.
Charge precision: 1.5%.
Input voltage: 4.5V-5.2V.
Full charge voltage: 4.2V.
Battery over-current protection: 3 A
The battery Undervoltage protection: 2.5 V

TP4056 Module 1.2 A Li-Ion Battery Charging Board Micro USB with Current Protection

SKU: S-142

In stock

20.00 (Incl. GST)

Specifications:

No MOSFET, Sense Resistor or Blocking Diode Required
Complete Linear Charger in SOP-8 Package for Single Cell Lithium-Ion Batteries
Constant-Current/Constant-Voltage Charges Single Cell Li-Ion Batteries Directly from USB Port
Preset 4.2V Charge Voltage with 1.5% Accuracy
Two Charge Status Output PinsC/10 Charge Termination
2.9V Trickle Charge Threshold (TP4056)
Soft-Start Limits Inrush Current

TP4056 Module 1.2 A Li-Ion Battery Charging Board Micro USB with Current Protection

SKU: S-121

In stock

20.00 (Incl. GST)

Specifications:
No MOSFET, Sense Resistor or Blocking Diode Required
Complete Linear Charger in SOP-8 Package for Single Cell Lithium-Ion Batteries
Constant-Current/Constant-Voltage Charges Single Cell Li-Ion Batteries Directly from USB Port
Preset 4.2V Charge Voltage with 1.5% Accuracy
Two Charge Status Output PinsC/10 Charge Termination
2.9V Trickle Charge Threshold (TP4056)
Soft-Start Limits Inrush Current

TP5000 3.6V/4.2V 1A Lithium Battery Charger Module

SKU: S-122

In stock

83.00 (Incl. GST)

Single Battery Charger Module

Programable Charge Curren Form 0.1A to 2A

Programable Precharge Current Form 10% to 100%

Based on Tp5000 Battery Charger IC

TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Lion Battery Compatible 2A Charging Board

SKU: S-123

In stock

63.00 (Incl. GST)

Features:
Input voltage: 5-15V DC power supply.
Charge status: full and unloaded blue lights, charging red.
Double 8.4v / 4.2v lithium rechargeable single .
Programmable charge current. 0. 1A-2A .
Programmable steady pre-charge current 10% -100%.
Wide operating voltage, maximum reach I8V.
Red and green LED charge status indicator.
Chip temperature protection, overcurrent protection, under voltage protection.
Battery temperature protection, reverse battery shutdown, short circuit protection.
Switching frequency 400Khz, usable inductance 20uH and more.
PWR_ON Power battery for switching control.

TPA3116 2.1 50Wx2+100W Bluetooth CSR4.0 Class D Power Amplifier

In stock

2,360.00 (Incl. GST)

Working mode: Class D
Operating voltage: DC18V to DC24V
Rated output power: 100W + 2 x 50W
Quiescent current: 60mA
Work efficiency: 90%