Showing 937–948 of 1105 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
RS232 To TTL Serial Converter Module
In stock
₹55.00 (Incl. GST)Specifications:
IC Chip: MAX3232
Operating Voltage: 3.3-5.5V
Operates up to 250 kbit/s
Power supply: external dc
interface: TXD, RXD, GND, VCC
Dimensions: 33mm*32mm*16mm
RS232 to TTL SP3232 UART Transceiver Communication Serial Module
In stock
₹292.00 (Incl. GST)IC Chip: SP3232E
Operating Voltage: 3.0V – 5.5V
Pre-assembled compact size board
Suitable for use with most microcontrollers
ESD enhanced
Hardware flow control supported
RS555 5000RPM 12V Dc Motor
In stock
₹210.00 (Incl. GST)Specifications:
Voltage: 12V
RPM: 5000 approx.
Amp Rating: 2 Amp (max 5 Amp)
SanDisk Micro SDXC USH-I 64GB Class 10 Memory Card
In stock
₹1,111.00 (Incl. GST)It has a memory size of 64GB
It has a data transfer rate of 98Mb/sec.
It is a Class 10 micro SD card.
The high speed SD Card is compatible with mobile phones and even Raspberry pi.
It has 5 years of manufacturing defect Warranty given by SanDisk.
The SD card does not come with pre-installed NOOBS. If you want the SD card to be installed with NOOBS, then select the OS given in the drop down.
SanDisk Ultra Micro SD 32GB UHS-I, 120MB/s R , Class 10 Memory Card
In stock
₹826.00 (Incl. GST)- SanDisk 32GB Memory Card
- Card Type: Ultra Micro SD
- Speed: up to 98MB/s
- Class: 10
- High-speed Card can be used for both Mobile phone and Raspberry Pi
- 5 years of manufacturing defect Warranty Given by Sandisk.
SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A
In stock
₹373.00 (Incl. GST)Specifications:
Frequency: 50HZ-150KHZ
Input Current : 0-30A
Output Mode: 0-1V @ 30mA
Output Plug 3.5mm
Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
Dielectric Strength 6000V AC/1min
Meet UL94-V0 flame retardant properties
Seeed Studio XIAO ESP32C3 – tiny MCU board with Wi-Fi and BLE, battery charge supported, power efficiency and rich Interface
Out of stock
₹550.00 (Incl. GST)Brand: Seeed Studio
Product: XIAO ESP32C3 – tiny MCU board with Wi-Fi and BLE
Circuit operating voltage: 3.3V@200mA
Charging current: 50mA/100mA
Input voltage (VIN): 5V
Seeed Studio XIAO ESP32S3 – 2.4GHz WiFi, BLE 5.0
Out of stock
₹749.00 (Incl. GST)Model: XIAO ESP32S3
Processor: Xtensa LX7 dual-core, 32-bit processor running up to 240 MHz
Wireless: Complete 2.4GHz WiFi subsystem, BLE: Bluetooth 5.0, Bluetooth mesh
On-chip Memory: 8M PSRAM & 8MB Flash
Working Temperature: -40°C ~ 65°C
Seeed Studio XIAO ESP32S3 Sense – 2.4GHz Wi-Fi, BLE 5.0, OV2640 camera sensor, digital microphone, battery charge supported, rich Interface, IoT, embedded ML
Out of stock
₹1,463.00 (Incl. GST)Item: Seeed Studio XIAO ESP32S3 Sense
Processor: ESP32-S3R8 , Xtensa LX7 dual-core,32-bit processor that operates at up to 240 MHZ
Wireless: Complete 2.4GHz Wi-Fi subsystem ,BLE: Bluetooth 5.0, Bluetooth mesh
Built-in Sensors: oV2640 camera sensor for 1600*1200 ,Digital Microphone
Servo 25KG DS3225MG 180Degree Metal Gear Digital Servo Motor Arduino High Torque
In stock
₹1,150.00 (Incl. GST)Specifications:
Item: DS3225MG 25KG Large Torque Digital Servo
Operating Voltage: 4.8 – 6.8 DC V
Running degree: 180 Degrees
Weight: 60 g (2.12 oz)
Motor Type: DC Motor
Gear Type: Stainless Steel & Aluminum
Working frequency: 50-333Hz
Size: 40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in)
Set of Aluminum Heatsink for Raspberry Pi (Large and Small)
In stock
₹49.00 (Incl. GST)Specifications:
Dimensions
Large Heatsink: 14 x 14 x 6 (L x W x H) mm
Small Heatsink: 9 x 9 x 5 (L x W x H) mm
Teeth Number
Large Heatsink: 7 Teeth
Small Heatsink: 5 Teeth
Compatible with most Raspberry Pi cases
Can be used with other devices such as the Beagle bone
Can be used with stepper motors, motor driver boards etc.
SHARP Distance Measuring Sensor unit 20 to 150 cm – GP2Y0A02YK0F
In stock
₹529.00 (Incl. GST)- Distance measuring range: 20 cm to 150 cm (8″ to 60″)
- Output type: Analog voltage
- Output voltage differential over distance range: 2.05 V (typical)
- Update period: 38 ± 10 ms