Showing 1033–1044 of 1105 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
TPA3116D2 12 to 24V DC Dual Channel 2 x 80W Audio Power Amplifier
In stock
₹899.00 (Incl. GST)Chip type: TPA3116D2
Chip protection: overvoltage under-voltage superheat DC detection short circuit
Supply voltage: DC 12V to 24V
Output power: 80W X 2
Power efficiency > 90%
Number of channels: double channel output
Module Size: 60 x 32 x 14mm
TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier Module
In stock
₹144.00 (Incl. GST)Specifications:
Working Voltage: DC 8-24V
Power Output: 60W
Applicable Speaker Impedance: 4-8 Ω
The sound quality is very good by using this module.
Mono digital audio power amplifier chip.
High output and low power consumption.
TPS3895ADRYR – Single-Channel Adjustable Supervisor IC
In stock
₹75.00 (Incl. GST)The TPS3895ADRYR is a precision voltage supervisor IC from Texas Instruments designed for single power rail monitoring. It operates from 1.7 V to 6.5 V, features an adjustable threshold (≥0.5 V), low 6 µA quiescent current, and a push-pull active-high output. With an adjustable delay via CT pin and enable control, it ensures reliable power sequencing in compact systems. Housed in a USON-6 package, it operates across –40 °C to +125 °C, ideal for low-power and industrial applications.
Transistor Set For Epson T1100 L1300 L1800 1390 Printer (A2210 C6082)
In stock
₹213.00 (Incl. GST)SPECIFICATION
A2210 (PNP Transistor)
-
Type: PNP
-
Maximum Voltage: 160V
-
Current: 1.5A
-
Package: TO-220
C6082 (NPN Transistor)
-
Type: NPN
-
Maximum Voltage: 400V
-
Current: 7A
-
Package: TO-220F
Common Features:
-
High switching speed
-
Low saturation voltage
-
High reliability for printer circuits
-
Suitable for Epson power and motor control boards
TSOP 1838 IR Receiver Module – IR Sensor for Remote Control Systems
In stock
₹20.00 (Incl. GST)
TSOP1738 Infrared Receiver Module
In stock
₹30.00 (Incl. GST)Specification:
-
Carrier Frequency: 38 kHz
-
Supply Voltage: 2.5V – 5.5V
-
Output Type: Active low
-
Reception Angle: ±45°
-
High Sensitivity Range: Up to 5 m (typical)
-
Ambient Light Immunity: Very high
-
Package Type: 3-pin epoxy package
-
Power Use: Very low current
TSOP31238 Infrared Receiver Sensor 38kHz
In stock
₹91.00 (Incl. GST)Specification:
-
Carrier Frequency: 38 kHz
-
Operating Voltage: 2.5V – 5.5V
-
Output Type: Active low
-
Reception Angle: ±45°
-
Detection Range: Up to 5 m (typical)
-
Ambient Light Immunity: High
-
Package: 3-pin epoxy package
-
Power Use: Low current
TTL to RS485 Power Supply Converter Board 3.3V 5V Hardware Auto Control Module
In stock
₹95.00 (Incl. GST)Specifications:-
Operating Voltage (VDC):3 ~ 30
Compatible Signals:3.3V and 5.0V
Working Temperature Range (°C):-40 to 85
Baud Rate:110 to 256000bps
Support multi-machine communication, at least 40 nodes can be connected to the same network
can be hot-swapped and there will be no signal thrombosis.
With standard 2.54 pitch pin headers
TTP223 Capacitive Single Touch Sensor Module (Red)
In stock
₹8.00 (Incl. GST)Specifications:
Input Voltage : 2 Volt – 5.5 Volts DC.
The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
Sensitivity can adjust by the capacitance(0~50pF).
Stable touching detection of the human body for replacing traditional direct switch key.
Provides direct mode toggle mode by pad option(TOG pin).
After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
TTP223B Capacitive Single Touch Sensor Module
In stock
₹31.00 (Incl. GST)Specifications:
Power supply voltage(VCC): 2.0, 3, 5.5 V.
Output high VOH: 0.8VCC V
Output low VOL: 0.3VCC V
Response time (touch mode) : 60 mS
Response time (low power mode) : 220 mS
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy installation
TTP224 4-way Capacitive Touch Switch Module
In stock
₹75.00 (Incl. GST)Onboard TTP224 capacitive touch sensor IC 4 keys
4 board-level status indicator
Working voltage: 2.4V-5.5V
Advanced Pins breakout, so that the output mode and working mode selectable.
Low power selection
Turbidity Sensor with Module
In stock
₹571.00 (Incl. GST)Specifications:
Operating Voltage: 5VDC.
Current: 30mA (MAX).
Operating temperature: -30 ° C to 80 ° C.
Compatible with Arduino, Raspberry Pi, AVR, PIC, etc.
Measuring Range: 0 ~ 1000 NTU.