Showing 97–108 of 372 results
Shop
Arduino Uno/Mega USB Cable (USB A To B)
In stock
₹50.00 (Incl. GST)Specifications:
USB type: A-B
30cm long cable
Long life
Good quality
Fully compatible with the PC.
Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions.
Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference.
Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
ATTINY85 USB Development Board
In stock
₹242.00 (Incl. GST)Specification:
Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
Power via USB or External Source or 7-16 v to 5 v (automatic selection).
The Onboard, 150 ma 5 v Regulator.
Built-in USB and serial were debugging).
6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
8 k Flash Memory (about 6 k after bootloader).
The I2C and SPI (vis USI).
The Power LED and the Test/Status LEDs.
Ball Caster Wheel Small
In stock
₹25.00 (Incl. GST)Specifications:
Base plate diameter: 27.5mm
Caster wheel diameter: 13.5mm.
Wheel height: 18mm
Ball Material: Steel.
Cap Material: Plastic.
Weight: 15 gm.
Load Capacity: 5 kg
Black 2 Pin Jumper Cap Pack of
In stock
₹5.00 (Incl. GST)Specifications:
Position- 2 Pin
Height -6 mm
Pressure Resistance- 500V AC/ minute
Contact Thermal Resistance -20mOhm (Maximum)
Dielectric Resistance -1000 MOhm
Accessory Type: Shunt
Type: Shorting Jumper
Termination Style: Through Hole
Mounting Angle: Straight
Contact Material: Copper Alloy
Current Rating: 2 A
Housing Material: Thermoplastic
Operating Temperature Range: – 25 °C to + 105°
Color Black
Bluetooth Module
In stock
₹230.00 (Incl. GST)Specifications:
Bluetooth protocol: Bluetooth Specification v2.0+EDR.
Frequency: 2.4GHz ISM band.
Modulation: GFSK(Gaussian Frequency Shift Keying).
Emission power: =4dBm, Class 2.
Sensitivity: =-84dBm at 0.1% BER.
BMP 180 PRESSURE SENSOR
In stock
₹236.00 (Incl. GST)Specifications:
Vin: 3 to 5VDC
Logic: 3 to 5V compliant
Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
Up to 0.03hPa / 0.25m resolution
-40 to +85°C operational range, +-2°C temperature accuracy
This board/chip uses I2C 7-bit address 0x77.
Compatible with Andriod Board.
BTI-30 Terminal for Panel Mounting
In stock
₹36.00 (Incl. GST)Specifications
Type Screw Type
Color Black
Mounting Type PCB Mount
Material Plastic
Bump Sensor – Limit Switch with Roller Lever
In stock
₹36.00 (Incl. GST)Specifications:-
Function Type : SPDT
Contact Type : 1CO,1NO,1NC
Action Type : Momentary
Current : 5A
Voltage : 250 VAC
Roller Hand
Number of Pin : 3 pin
BUZZER MODULE (5V)
In stock
₹35.00 (Incl. GST)Specifications:
SPU: MH-FMD
Material: ABS
Color: Blue
Work Voltage: 3.3-5V
PCB Dimension: 31 x 13 mm.
VCC : 3.3V-5V
GND : The Ground
I/O : I/O Interface of SCM
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B)
In stock
₹40.00 (Incl. GST)Features:
Long life
Good quality
USB Type: USB 2.0 A to USB 2.0 Mini B
Capacitive Touch Switch HTTM Touch Button Sensor Module- GREEN
In stock
₹72.00 (Incl. GST)Specifications:
Color: Green
Input Voltage Range: 2.7 to 6
Output Voltage (VDC): 3.3
Operating Temperature Range (°C): -30 to +70
Length (mm): 15
Width (mm): 15
Height (mm): 3
Weight (gm): 10
Case for XH-W1209 Temperature Controller
In stock
₹50.00 (Incl. GST)An acrylic case for an XH-W1209 temperature controller is a protective enclosure made of acrylic (a type of plastic) that is designed to hold and protect the XH-W1209 temperature controller. It may have openings for the various connectors and controls on the temperature controller, as well as ventilation holes to allow air to circulate and prevent overheating. An acrylic case can help to prevent damage to the temperature controller from impact, dust, and other environmental factors.
It can also improve the appearance of the temperature controller by enclosing it in a clear or colored enclosure. Acrylic cases are often used to protect and display electronic devices such as temperature controllers, Raspberry Pi boards, and other hobbyist or DIY projects. It includes all assembly hardware. It is shipped unassembled, assembly is required.