Showing 145–156 of 373 results
Shop
Dual Led 0.28 ” Display for DC0-100V Voltage and Current Test Digital Instrument Digital Meter Panel Amplifier Red Blue 10A
In stock
₹112.00 (Incl. GST)Specification:
Voltage supply range: 4.5V to 24V
Voltage measurement range: 0-100V
Current measurement range: 0-10A
Voltage error: ±0.1%
Current error: ±1%
Working temperature: -10℃ to 65℃
Dual USB 5V 2.4A Micro/Type-C LED USB Mobile Power Bank 18650 Charging Module Lithium Battery Charger Board Circuit Protection
In stock
₹241.00 (Incl. GST)Specifications:
The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!!!!
This module is a portable backup power supply with an input that matches the 5.0V adapter to charge the internal battery. Use built-in battery for portable device to provide 5.0V/3.0A USB2.0 supply output for external devices.
Protection: overcharge protection, overdischarge protection, short circuit protection, constant current.
Charging cable: support three USB data cable charging, including Iphone and Android.
Size: 6.5 * 2.5 * 0.1cm; Dual output current: 5V 2.4A; Input voltage B+ to B-: 3.0 – 4.2V.
E18-D80NK IR NPN NO Proximity Sensor
In stock
₹183.00 (Incl. GST)Sensing range: 3 – 80cm.
Input voltage: 5VDC.
Current Consumption: 100mA.
Digital Output.
Cable length: 1 m.
Diffuse reflective type.
ENC28J60 Ethernet LAN Network SPI Module(10 Pin)
In stock
₹320.00 (Incl. GST)Features:
3.3 V power supply pin.
SPI Interface with Clock Speeds Up to 20 MHz
The board 25MHZ crystal
Fully Compatible with 10/100/1000Base-T Networks
Integrated MAC and 10Base-T PHY
Supports One 10Base-T Port with Automatic Polarity Detection and Correction
Supports Full and Half-Duplex modes
Programmable Automatic Retransmit on Collision
SPI Interface with Clock Speeds Up to 20 MHz
For Arduino, SPI, AVR, PIC, LPC, STM32.
ERD UC-50/UC-252 Micro USB/V8 Cable
In stock
₹60.00 (Incl. GST)Key Features:
Connector Type: Micro USB (V8)
Length: Approx. 1 meter
Supports: Fast charging & high-speed data transfer
Compatibility: ESP32, ESP8266, Arduino, Raspberry Pi Zero, Android phones, power banks, and other Micro USB devices
Build: Flexible, tangle-free cable with strong insulation
Usage: Ideal for powering and programming development boards like ESP32
Perfect for:
Students, hobbyists, and developers working on microcontroller and IoT projects.
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
In stock
₹104.00 (Incl. GST)Specifications:
Module Type: ESP-01 ESP8266
Function: Wireless transceiver module for Wi-Fi connectivity
Features: Serial communication interface
Usage: Provides Wi-Fi connectivity to microcontrollers or devices via UART (Universal Asynchronous Receiver-Transmitter) communication
Compatibility: Widely used with microcontrollers for IoT (Internet of Things) projects and various DIY electronics applications
Capabilities: Enables devices to connect to Wi-Fi networks, facilitating data transmission and communication over Wi-Fi.
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
In stock
₹149.00 (Incl. GST)WS2812 Led on board.
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLL, regulators, DCXO and power management units
ESP-WROOM-32 38 Pins WIFI Bluetooth Networking Smart Component Development Board
In stock
₹400.00 (Incl. GST)Specifications:
NodeMCU based on ESP-WROOM-32 module
ESP32 is a dual core 32-bit processor with built-in 2.4 GHz Wi-Fi and Bluetooth
Wi-Fi:802.11 b/g/n
Bluetooth V4.2 – Supports BLE and Classic Bluetooth
520KByte RAM
3.3V Operating voltage range
Maximum Operating Frequency : 240 MHz.
Analog Input Pins: 12 bit, 18 channels.
Based on ESP32 DEVKIT DOIT
30 GPIO Version
4MByte flash memory
In breadboard-friendly breakout
USB micro B for power and Serial communication, use to load program and serial debugging
ESP-WROOM-32 WIFI Bluetooth Networking Smart Component Development Board-30 Pins
In stock
₹355.00 (Incl. GST)Specifications:
Ultra-low-power management.
4 MB Flash.
Current: 80 mA.
Supply Voltage: 3.0 V ~ 3.6 V.
Data Rate: 150 Mbps.
Frequency: 2.4 GHz.
ESP32 (38 Pin) WiFi + Bluetooth NodeMCU-32 Development Board
In stock
₹450.00 (Incl. GST)ESP32 Development board is based on the ESP WROOM32 WIFI + BLE
Module.It’s a low-footprint, minimal system development board powered by
the latest ESP-WROOM-32 module and can be easily inserted into a
solderless breadboard.
It contains the entire basic support circuitry for the ESP-WROOM-32,
including the USB-UART bridge, reset- and boot-mode buttons, LDO
regulator and a micro-USB connector. Every important GPIO is available
ESP32-CAM WiFi + bluetooth Camera Module Development Board ESP32 With Camera Module OV2640
In stock
₹650.00 (Incl. GST)Specifications:
Power Supply Range: 3.6V to 5V
Bluetooth: 4.2 BR / EDR and BLE standards
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Custom IO Port: 9
Low-power dual-core 32-bit CPU for application processors
RAM: 520KB SRAM +4M PSRAM
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
UART Baudrate: Default 115200 bps
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Operating Temperature (°C): -20 to 80
Support OV2640 and OV7670 cameras with built-in flash
Support for images WiFI upload
Support TF card