Showing 373–384 of 1105 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
A3977 SLPT SMD IC – Microstepping Bipolar Stepper Motor Driver
In stock
Specifications
-
IC Type: Bipolar Stepper Motor Driver
-
Model: A3977 SLPT
-
Microstepping Modes: Full, Half, Quarter, Sixteenth
-
Output Current: Up to 2.5A per phase (with proper cooling)
-
Motor Type: Bipolar Stepper Motor
-
Supply Voltage: Up to 35V
-
Control Method: PWM current control
-
Protections: Thermal shutdown, overcurrent protection
-
Package Type: SMD (TSSOP / Power SOP – SLPT)
-
Operating Temperature: -40°C to +85°C
-
RoHS Compliance: Yes
A4988 Stepper Motor Driver- Good Quality
In stock
Original price was: ₹129.00.₹95.00Current price is: ₹95.00. (Incl. GST)Specifications:
Supply Voltage : 8-35 VDC.
Current : 1.0A (no heatsink ).
Current : 2.0A (with heat-sinking).
logic input : 3 – 5.5V .
ABS Plastic Landing Gear for F450 and S500 quadcopter (Pack of 4) – Made in INDIA
In stock
₹177.00 (Incl. GST)- Color: Black
- Material: ABS Plastic
- Length: ~190mm
- Ground Clearance: 150 mm
- Compatibility: Q450 and S500 Frames
- Weight: 75 gm (total of 4)
ABSD LiPo Battery 11.1V 2200MAH 3S 80C
In stock
₹1,500.00 (Incl. GST)Specifications:
- Capacity (mAh) : 2200
- Weight (gm) : 175
- Output Voltage : 11.1 V
- Charge Rate : 1-3 C (Recommended)
- Discharge Plug : XT-60
- Balance Plug : JST-XH
- Length (mm) : 106
- Width (mm) : 34
- Height (mm) : 23
- Max. Charge Rate : 5 C
- Max. Continuous
- Discharge : 80C(55.0A)
ACS712 20AMP Ac/DC Current Sensor
In stock
₹106.00 (Incl. GST)Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -20A ~ 20A
Sensitivity: 100mV/A
Low-noise analog signal path.
Power-On Time: 35us
5 µs output rise time in response to step input current.
Small footprint, low-profile SOIC8 package.
ACS712 30AMP Ac/DC Current Sensor
In stock
₹86.00 (Incl. GST)Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -30A ~ 30A
Sensitivity: 100mV/A
Low-noise analog signal path.
Power-On Time: 35us
5 µs output rise time in response to step input current.
Small footprint, low-profile SOIC8 package.
ACS712 Current Sensor 5A
In stock
₹100.00 (Incl. GST)Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -5A ~ 5A
Sensitivity: 180mV/A ~190mV/A, Typical: 185mV/A
Low-noise analog signal path.
Device bandwidth is set via the new FILTER pin.
5 µs output rise time in response to step input current.
Small footprint, low-profile SOIC8 package.
AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
In stock
₹450.00 (Incl. GST)Specifications:
Fully integrated single-lead ECG front end
Common-mode rejection ratio: 80 dB (dc to 60 Hz)
Two or three-electrode configurations
Qualified for automotive application
Single-supply operation: 2.0 V to 3.5
Fast restore feature improves filter settling
Adafruit TSL2591 High Dynamic Range Digital Light Sensor – STEMMA QT
In stock
₹1,000.00 (Incl. GST)Approximates Human eye Response
Extremely wide dynamic range 1 to 600,000,000 Counts
Lux Range: 188u Lux sensitivity, up to 88,000 Lux input measurements
Voltage range: 3.3-5V into the onboard regulator
This board/chip uses I2C 7-bit addresses 0x29 and 0x28 (yes BOTH!)
ADS1115 16 Bit I2C ADC Analog to Digital Converter Module
In stock
₹164.00 (Incl. GST)Specifications:
Single-shot mode: automatically turns off
Low current consumption: Continuous mode 150 μA
Wide supply voltage range: 2.0V to 5.5V
Interfacing is done via I2C
Programmable data rate: 8SPS to 860SPS
Low drift internal voltage reference
Internal Oscillator
Internal PGA up to 860 samples per second (SPS)
Four single-ended or two differential inputs (ADS1115)
Operating temperature: -40 ° C to + 140 ° C
Programmable comparator
ADuM1401AR SMD IC – 4-Channel Digital Isolator (Analog Devices)
In stock
₹199.00 (Incl. GST)Specifications
-
IC Type: Digital Isolator
-
Model: ADuM1401AR
-
Manufacturer: Analog Devices (ADI)
-
Channels: 4
-
Data Direction: 3 forward / 1 reverse (typical configuration)
-
Data Rate: High speed
-
Isolation Voltage: High isolation rating
-
Supply Voltage: 3.0V to 5.5V
-
Package Type: SMD (SOIC)
-
Operating Temperature: -40°C to +105°C
-
RoHS Compliance: Yes
Advance Technologies EMG Muscle Sensor V3.0 With Cable And Electrodes
In stock
₹1,250.00 (Incl. GST)The diameter of the Electrode Pad: 52 mm
Cable Length: 2 feet
Weight: 30gm.
Improved adjustable gain (more rugged)
Onboard port for our new cables
Connects to the board straight out of the box
The reduced voltage needed (+-3.5V)