Showing 349–360 of 372 results
Shop
U-blox NEO-6M GPS Module with EPROM
In stock
₹250.00 (Incl. GST)Specifications:
Standalone GPS receiver
Anti-jamming technology
UART Interface at the output pins (Can use SPI ,I2C and USB by soldering pins to the chip core)
Under 1 second time-to-first-fix for hot and aided starts
Receiver type: 50 Channels – GPS L1 frequency – SBAS (WAAS, EGNOS, MSAS, GAGAN)
Time-To-First-fix: For Cold Start 32s, For Warm Start 23s, For Hot Start <1s
Maximum navigation update rate: 5Hz
Default baud rate: 9600bps
EEPROM with battery backup
Sensitivity: -160dBm
Supply voltage: 3.6V
Maximum DC current at any output: 10mA
Operation limits: Gravity-4g, Altitude-50000m, Velocity-500m/s
Operating temperature range: -40ºC TO 85°C
Ultrasonic sensor
In stock
₹66.00 (Incl. GST)Specifications:
Working Voltage : 5V (DC)
Output Signal : 5V
Sensor Angle : Less than 15 Degrees
Detection Distance : 2 cm to 450 cm
Input Trigger Signal : 10µs TTL impulse
Echo Signal : Output TTL PWL Signal
Theoretical Measuring Distance : 2cm to 450cm
Practical Measuring Distance : 2cm to 80cm
Accuracy : 3mm
Measuring angle covered : <15°
Operating Current : <15mA
Operating Frequency : 40Hz
High sensitivity ultrasonic range sensor
Works with Arduino board
UNO R3 CH340G ATMega328P compatible with arduino + Cable
In stock
₹280.00 (Incl. GST)A basic Arduino Kit including everything to get started.
It includes a quality proven Arduino Cable.
Microcontroller ATmega328 (SMD) – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Digital I / O Pins 14 (of which 6 provide PWM output)
Analog Input Pins: 6
Uno R3 CH340G ATMega328P Development Board Compatible with Arduino
In stock
₹219.00 (Incl. GST)Specifications:
Microcontroller ATmega328 (SMD) – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 5-20V
Digital I / O Pins 14 (of which 6 provide PWM output)
Analog Input Pins: 6
US-100 Ultrasonic Sensor Distance Measuring Module with Temperature Compensation
In stock
₹198.00 (Incl. GST)Voltage: DC 2.4V – 5V
Average Current Consumption: < 2mA
Output mode: level or UART
Detection distance: 2cm – 450cm
Working temperature: -20°C to +70°C
It features temperature compensation.
Provides two output modes level or UART.
USB HOST SHIELD ADK Arduino Compatible
In stock
₹641.00 (Incl. GST)Specifications:
Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
The following device classes are currently supported by the shield:
HID devices, such as keyboards, mice, joysticks, etc.
game controllers – Sony PS3, Nintendo Wii, Xbox360
USB to serial converters – FTDI, PL-2303, ACM, as well as certain cell phones and GPS receivers
ADK-capable Android phones and tables
Digital cameras – Canon EOS, Powershot, Nikon DSLRs and P&S, as well as generic PTP
Mass storage devices, such as USB sticks, memory card readers, external hard drives
Bluetooth dongles.
USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool
In stock
₹376.00 (Incl. GST)Specifications:
Logical light indication: a small light indicate CHO electrical level.
Input feature: 5PF,100K Ohm.
USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits
8-Channels USB logic analyzer with a 24Mhz sampling frequency
Can analyze UART, IIC, and SPI, etc automatically
Great for MCU, ARM system and FPGA development
Voltage: 0-5.5V
Threshold Voltage: 1.5V
USB to RS485 Converter Adapter Support WIN7 XP Vista Linux Mac OS
In stock
₹70.00 (Incl. GST)Specifications:
USB to RS485 Converter Adapter
USB connector: to your PC
RS485 connector: to your RS485 device
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side)
Better than using CH341D chip or similar chip to support the laptop USB port
Communication distance up to 1.2KM, with the anti-jamming performance of the industrial site
No need external power, powered by USB port
USB To UART TTL 5V 3.3V FT232RL FTDI Download Cable To Serial Adapter Module
In stock
₹128.00 (Incl. GST)Specification :
Material: PCB + Electronic Component
Support 3.3V, 5V
Main Color: Red
Chipset: FT232RL
USB power has over current protection, using 500MA self-restore fuse
RXD/TXD transceiver communication indicator
Pin definition: DTR,RXD,TX,VCC,CTS,GND
Pitch:2.54mm
Module Size: About 36mm(length)*17.5mm(width)
Interface : Mini USB
USB To UART TTL Serial CP2102 Module STC Download Cable Pl2303 for Arduino
In stock
₹149.00 (Incl. GST)Chipset: CP2102
Power: USB, 3.3V (<40mA), 5V, GND, TX, RX
Baud Rate: 300bps to 1Mbps.
Signal Levels: 3.3V, positive logic.
OS Support: Windows, Mac OS, Linux.
Format Support: 5-8 data bits, 1/2 stop bits
Vibration sensor module alarm Motion sensor module vibration switch SW-420
In stock
₹58.00 (Incl. GST)Specifications:
Operating Voltage: 3.3V to 5V DC
Operating Current: 15mA
Using SW-420 normally closed type vibration sensor
LEDs indicating output and power
It uses wide voltage LM393 comparator
Output format: digital switching output (0 and 1)
VL53L0X TOF Based LIDAR Laser Distance Sensor
In stock
₹175.00 (Incl. GST)Operating voltage: 2.6V to 5.5V
Supply Current: 10mA
Communication: I2C protocol
940 nm safe and long-ranging laser VCSEL
In-built 2.8V linear voltage regulator