Showing 337–348 of 372 results
Shop
TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB BMS
In stock
₹23.00 (Incl. GST)Specifications:-
Input interface: Mini USB.
Current: 1A adjustable.
Charge precision: 1.5%.
Input voltage: 4.5V-5.2V.
Full charge voltage: 4.2V.
Battery over-current protection: 3 A
The battery Undervoltage protection: 2.5 V
TP4056 Module 1.2 A Li-Ion Battery Charging Board Micro USB with Current Protection
In stock
₹20.00 (Incl. GST)Specifications:
No MOSFET, Sense Resistor or Blocking Diode Required
Complete Linear Charger in SOP-8 Package for Single Cell Lithium-Ion Batteries
Constant-Current/Constant-Voltage Charges Single Cell Li-Ion Batteries Directly from USB Port
Preset 4.2V Charge Voltage with 1.5% Accuracy
Two Charge Status Output PinsC/10 Charge Termination
2.9V Trickle Charge Threshold (TP4056)
Soft-Start Limits Inrush Current
TP4056 Module 1.2 A Li-Ion Battery Charging Board Micro USB with Current Protection
In stock
₹20.00 (Incl. GST)Specifications:
No MOSFET, Sense Resistor or Blocking Diode Required
Complete Linear Charger in SOP-8 Package for Single Cell Lithium-Ion Batteries
Constant-Current/Constant-Voltage Charges Single Cell Li-Ion Batteries Directly from USB Port
Preset 4.2V Charge Voltage with 1.5% Accuracy
Two Charge Status Output PinsC/10 Charge Termination
2.9V Trickle Charge Threshold (TP4056)
Soft-Start Limits Inrush Current
TP5000 3.6V/4.2V 1A Lithium Battery Charger Module
In stock
₹83.00 (Incl. GST)Single Battery Charger Module
Programable Charge Curren Form 0.1A to 2A
Programable Precharge Current Form 10% to 100%
Based on Tp5000 Battery Charger IC
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Lion Battery Compatible 2A Charging Board
In stock
₹63.00 (Incl. GST)Features:
Input voltage: 5-15V DC power supply.
Charge status: full and unloaded blue lights, charging red.
Double 8.4v / 4.2v lithium rechargeable single .
Programmable charge current. 0. 1A-2A .
Programmable steady pre-charge current 10% -100%.
Wide operating voltage, maximum reach I8V.
Red and green LED charge status indicator.
Chip temperature protection, overcurrent protection, under voltage protection.
Battery temperature protection, reverse battery shutdown, short circuit protection.
Switching frequency 400Khz, usable inductance 20uH and more.
PWR_ON Power battery for switching control.
TPA3116D2 12 to 24V DC Dual Channel 2 x 80W Audio Power Amplifier
In stock
₹697.00 (Incl. GST)Chip type: TPA3116D2
Chip protection: overvoltage under-voltage superheat DC detection short circuit
Supply voltage: DC 12V to 24V
Output power: 80W X 2
Power efficiency > 90%
Number of channels: double channel output
Module Size: 60 x 32 x 14mm
TSOP 1838 IR Receiver Module – IR Sensor for Remote Control Systems
In stock
₹20.00 (Incl. GST)
TTL to RS485 Power Supply Converter Board 3.3V 5V Hardware Auto Control Module
In stock
₹95.00 (Incl. GST)Specifications:-
Operating Voltage (VDC):3 ~ 30
Compatible Signals:3.3V and 5.0V
Working Temperature Range (°C):-40 to 85
Baud Rate:110 to 256000bps
Support multi-machine communication, at least 40 nodes can be connected to the same network
can be hot-swapped and there will be no signal thrombosis.
With standard 2.54 pitch pin headers
TTP223 Capacitive Single Touch Sensor Module (Red)
In stock
₹8.00 (Incl. GST)Specifications:
Input Voltage : 2 Volt – 5.5 Volts DC.
The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
Sensitivity can adjust by the capacitance(0~50pF).
Stable touching detection of the human body for replacing traditional direct switch key.
Provides direct mode toggle mode by pad option(TOG pin).
After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
TTP223B Capacitive Single Touch Sensor Module
In stock
₹31.00 (Incl. GST)Specifications:
Power supply voltage(VCC): 2.0, 3, 5.5 V.
Output high VOH: 0.8VCC V
Output low VOL: 0.3VCC V
Response time (touch mode) : 60 mS
Response time (low power mode) : 220 mS
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy installation
TTP224 4-way Capacitive Touch Switch Module
In stock
₹75.00 (Incl. GST)Onboard TTP224 capacitive touch sensor IC 4 keys
4 board-level status indicator
Working voltage: 2.4V-5.5V
Advanced Pins breakout, so that the output mode and working mode selectable.
Low power selection
Turbidity Sensor with Module
In stock
₹571.00 (Incl. GST)Specifications:
Operating Voltage: 5VDC.
Current: 30mA (MAX).
Operating temperature: -30 ° C to 80 ° C.
Compatible with Arduino, Raspberry Pi, AVR, PIC, etc.
Measuring Range: 0 ~ 1000 NTU.