Showing 313–324 of 372 results
Shop
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
In stock
₹230.00 (Incl. GST)Specifications:
Operating Voltage: 3.4-4.4V DC
Peak Current: 2A
TTL serial port for serial port, you can link directly to the micro-controller.
Don’t need MAX232.
The power module automatically boots, homing network.
Onboard signal lights all the way.
It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SIM900A GSM GPRS Module with RS232 Interface and SMA Antenna
In stock
₹945.00 (Incl. GST)Features:
Dual-band GSM/GPRS engine
Operates on frequencies: EGSM 900MHz and DCS 1800MHz
GPRS multi-slot class 10/ class 8 (optional)
Supports GPRS coding schemes: CS-1, CS-2, CS-3, and CS-4
Utilizes GPRS/GSM technology for communication with a mobile SIM card
Compatible with various microcontrollers such as Arduino and Raspberry Pi
Suitable for embedded applications
RS232 interface for direct communication with a computer or MCU kit
Compact size
Suitable for IoT-based projects and embedded systems
SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
In stock
₹420.00 (Incl. GST)Model: SIMONK 30A.
Constant Current: 30A (Max 40A < 10 sec).
BEC: 5V 2A.
Suitable Batteries: 2-3S LiPo.
Single Motor Electric Longboard Skateboard Controller ESC Replace Control
In stock
₹10,000.00 (Incl. GST)Specification:
Single Motor Drive ESC:
Rated Voltage: 36V
Current: 12A
Power: 430W (36V)
Rotate Speed: 3000rpm
Speed: 35km/h
Drive Mode: FOC
Sensing Mode: Hall
Load Bearing: 120kg
Protection: Over-voltage, Under-voltage, Overheat, Stall, CW/CCW, Overcurrent, Speed Control
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio
In stock
₹40.00 (Incl. GST)Specifications:
Operating Voltage: 3.3V to 5V DC
Operating Current: 15mA
Output Digital – 0V to 5V, Adjustable trigger level from preset
Output Analog – 0V to 5V based on infrared radiation from fire flame falling on the sensor
LEDs indicating output and power
PCB Size: 3.2cm x 1.4cm
LM393 based design
Easy to use with Microcontrollers or even with normal Digital/Analog IC
Small, cheap and easily available
Compatible with Arduino , raspberry pi.
Soil NPK Sensor 5V RS485 JXCT
In stock
₹3,540.00 (Incl. GST)Soil NPK Sensor – 5V RS485 (JXCT)
The Soil NPK Sensor is an advanced agricultural-grade sensor that measures the concentration of essential soil nutrients: Nitrogen (N), Phosphorus (P), and Potassium (K). Ideal for precision farming, this sensor uses RS485 communication and is built by JXCT, a trusted name in environmental sensing.
Solar for DIY Square Shape Mini Solar Panel 6V-100 mAh
In stock
₹141.00 (Incl. GST)Specifications:
Voltage: 6V 100mAh
Material：Polycrystalline
Size: 70x70mm
Weight: 16g
SOLDRON 25W/230volts Soldering Iron
In stock
Original price was: ₹368.00.₹350.00Current price is: ₹350.00. (Incl. GST)- Attains full operating Temperature within a seconds.
- Maintains constant tip temperature.
- Low Leakage Current.
- Safe for the use on dedicated and sensitive Components.
- Maximum Heat transfer efficiency.
- Slide on a Replaceable tip.
- Cool Grip Insulating Nylon Handle
- High Quality Built Material.
Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino
In stock
₹45.00 (Incl. GST)Specifications:
Operating Voltage: 3.3V to 5V DC
LM393 comparator with threshold preset
PCB Size: 3.4cm * 1.6cm
Induction distance: 0.5 Meter
Operating current: 4~5 mA
Microphone Sensitivity (1kHz): 52 to 48 dB
Speed Measuring Sensor Groove Coupler Module For Arduino
In stock
₹49.00 (Incl. GST)Specifications:
Using imported groove optical coupling sensor, width 5mm.
It have the output state light, if output high level, the lights are off. if output low level ,it on.
If it covered, it will output high level; otherwise it output low level.
Good signal and waveform, with strong driving ability for more than 15mA.
The working voltage of 3.3V to 5V
Output: digital switch output (0 and 1)
Equipped with a fixed bolt hole, easily install.
Use the LM393 wide voltage comparer
Speed measuring sensor groove coupler module for Arduino
ST Link V2 Programmer For STM8 and STM32
In stock
₹137.00 (Incl. GST)Specifications:
PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
Interface definition directly marked on the shell, clear, convenient and practical!
5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
Shell characters using laser engraving, never fade off! Permanent clarity!
500MA internal resettable fuse, complete protection of your expensive computer motherboard!
SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
STM32F103C8T6 Minimum System Board Micro-computer STM32 ARM Core Board
In stock
₹189.00 (Incl. GST)Specifications:
2.0-3.6V power, I/O.
Operating voltage:3.3V
Analog inputs:10
Digital I/O pins:37
DC source/sink from I/O pins:6mA
Flash memory (KB):64/128
SRAM:20KB
Frequency (clock speed):72MHz max.
Communication:I2C, SPI, UART, CAN, USB