Showing 481–492 of 1108 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
CD4081 SMD IC
In stock
Specifications
-
IC Type: Quad 2-Input AND Gate
-
Model: CD4081
-
Logic Family: CMOS 4000 Series
-
Gates: 4 AND Gates
-
Inputs per Gate: 2
-
Operating Voltage: 3V to 15V
-
Low Power Consumption: Yes
-
Package Type: SMD (SOIC-14 / TSSOP-14, variant dependent)
-
Operating Temperature: -40°C to +85°C
-
RoHS Compliance: Yes
CD4093BE-XBLW-4uA 3V~15V 90ns With Non-Gate DIP-14 Logic Gates ROHS
In stock
₹25.00 (Incl. GST)MPN: CD4093BE(XBLW)
CD74HC4067 High Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module
In stock
₹61.00 (Incl. GST)Specifications:
2V to 6V operation
“On” resistance: 70 Ohms @ 4.5V
6ns break-before-make @ 4.5V
Wide operating temperature range: -55C to 125C
Cellmeter-7 Digital Battery Capacity Checker Controller
In stock
₹510.00 (Incl. GST)The Cellmeter-7 is a digital battery capacity checker designed to measure voltage, cell balance, and remaining capacity of various battery types including LiPo, LiFe, Li-ion, NiMH, and NiCd. Ideal for RC models, battery testing, charging setup, and field diagnostics.
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
In stock
₹59.00 (Incl. GST)- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Microcomputer with cold start reset button
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software and Driver
In stock
₹234.00 (Incl. GST)Features:
Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
With 24/25 status indicator lamp
Support USB to TTL conversion support 24EEPROM and 25 SPI flash 8pin/ 16pin chip
Recognize 25 series chip automatically
Supports download STC series procedure of single chip
SPI pin to support expanding the utility
STC microcontroller supports a full range of program download
Support expanding the utility by SPI pin
With SOP8 SOP16 to DIP8 converter board
Supports Windows XP, Vista, Win7 and Win8 (32/64bit) system
Provide 5V-3.3V power supply output
CJMCU MCP4725 I2C DAC Breakout Development Board
In stock
₹127.00 (Incl. GST)Feature:
12-bit resolution
I2C Interface (Standard, Fast, and High-Speed supported)
Small package
2.7V to 5.5V supply
Internal EEPROM to store settings
CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board
In stock
₹75.00 (Incl. GST)Features :
Low Standby Current.
1-to-8 Bidirectional Translating Switches.
I2C Bus and SMBus Compatible.
5-V Tolerant Inputs.
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
In stock
₹105.00 (Incl. GST)Features:
0.1 ohm 1% 2W current sense resistor
Up to +26V target voltage
Up to ±3.2A current measurement, with ±0.8mA resolution
Senses Bus Voltages from 0 to 26 V
2C- or SMBus-compatible interface. The
Reports Current, Voltage, and Power.
CJMCU-2551 MCP2551 CAN Protocol Controller High-speed Interface Module
In stock
Original price was: ₹249.00.₹121.00Current price is: ₹121.00. (Incl. GST)Features:
Supports 1 Mb/s operation
Suitable for 12V and 24V systems
The externally-controlled slope for reduced RFI emissions
Detection of ground fault (permanent Dominant) on TXD input
Power-on Reset and voltage brown-out protection
An unpowered node or brown-out event will not disturb the CAN bus
Low current standby operation
Protection against damage due to short-circuit conditions (positive or negative battery voltage)
Protection against high-voltage transients
Automatic thermal shutdown protection
Up to 112 nodes can be connected
High-noise immunity due to differential bus implementation
Temperature ranges:
– Industrial (I): -40°C to +85°C
– Extended (E): -40°C to +125°C