Showing 577–588 of 1117 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board
In stock
₹97.00 (Incl. GST)Model: ESP32-CAM-MB
Color: Black
Chipset: CH340G
Connectivity Technology: USB
ESP32-S3 Microcontroller, 2.4GHz Wi-Fi Development Board, 240MHz Dual Core Processor, ESP32-S3-DEV-KIT-N16R8 Module, 16MB Flash – Solder Version
Out of stock
₹950.00 (Incl. GST)Features
Adopts ESP32-S3-WROOM-1-N16R8 module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz.
Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, and 16MB Flash memory.
Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance.
Type-C connector, easier to use.
Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface.
Rich peripheral interfaces, pin compatible with ESP32-S3-DevKitC-1 development board, high compatibility and expandability.
Castellated module allows soldering directly to carrier boards.
Supports multiple low-power operating states, the adjustable balance between communication distance, data rate, and power consumption to meet the power requirements of various application scenarios.
ESP8266 ESP-01S Relay module relay WIFI smart socket
In stock
₹349.00 (Incl. GST)Microproessor: ESP8266 microcontroller with a 32-bit Tensilica L106 RISC CPU
Wireless Connectivity: WiFi 802.11 b/g/n (2.4 GHz) for connecting to local networks and the internet.
Relay: 250VAC, 10A Single relay switch (Normally Open) for controlling electrical loads
GPIO Pins: GPIO0 and GPIO2 are commonly used for relay control and status indication
Serial Communication: UART up to 115200 bps
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
In stock
₹261.00 (Incl. GST)Features :
LDR Light Sensor on board
WS2812 Led on board
3x tactile buttons (1x in the Witty board and 2x in theCH340 board)
Micro USB connection for power and/or programming
Uses latest ESP-12F module with 4M flash and integrated antenna
Includes CH340G USB-to-UART programmer
Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
RGB LED connected to GPIO 12,13 and 15
It supports 3 modes AP, STA, AP+STA
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
In stock
Original price was: ₹960.00.₹674.00Current price is: ₹674.00. (Incl. GST)Specifications:
Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
Stackable Design, can directly be supported by Arduino official Ethernet Library.
Supports up to four simultaneous socket connections
Can be used to store files for serving over the network.
Can be accessed using the Mini SD TF library.
IEEE802.3af compliant
Low output ripple and noise (100mVpp)
Overload and short-circuit protection
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
In stock
₹685.00 (Incl. GST)Wheelbase: 450mm
Material: Glass Fiber + Polyamide-Nylon
Motor Mounting Hole Diameter: 3 mm
Arm Size: 220 x 40 (LxW) mm
Arm mounting holes (on frame): 3 mm
Arm mounting holes (on arm): 2 mm
F450 / Q450 Quadcopter Frame(PCB Version with Integrated PCB) + Plastic Landing Gear Combo Kit – Made in INDIA
In stock
₹860.00 (Incl. GST)- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Weight: 330 gm
- Motor Mounting Hole Dia.: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Landing Gear Material: ABS
- Landing Gear Height: 200 mm
Female to Female Jumper Wire 40 Pin 20CM (Standard)
In stock
₹60.00 (Incl. GST)Features
40P color DuPont line
Length: 200mm
Weight: 30 gm
Compatible with 2.54mm spacing pin headers
40pcs chromatic female to female color jump wire
High quality and in good working condition
Durable and reusable
Easy to install and use
Female to Female Jumper Wire Set of 10pc 20cm
In stock
₹15.00 (Incl. GST)Features
10P color DuPont line
Length: 200mm
Compatible with 2.54mm spacing pin headers
40pcs chromatic female to female color jump wire
High quality and in good working condition
Durable and reusable
Easy to install and use
Flame Sensor
In stock
₹29.00 (Incl. GST)Specifications:
Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm
Detection distance: 20cm (4.8V) ~ 100cm (1V)
Detection angle about 60 degrees, it is sensitive to the flame spectrum.
Comparator chip LM393 makes module readings stable.
Adjustable detection range.
Operating voltage 3.3V-5V
Digital and Analog Output
DO digital switch outputs (0 and 1)
AO analog voltage output
Power indicator and digital switch output indicator
Flysky FS-i6X 2.4GHz 6CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver
In stock
₹4,850.00 (Incl. GST)Transmitter: FS-i6X (6 Channels)
Receiver: FS-iA10B (10 Channels)
RF Range: 2.408-2.475 GHz
RF Power : < 20 dBm
RF Channel: 135
Bandwidth: 500 kHz
Total Weight: 392 gm
Power: 6V DC 1.5A
Flysky FS-IA6B RF 2.4GHz 6CH PPM output with iBus port receiver
In stock
Original price was: ₹1,649.00.₹1,200.00Current price is: ₹1,200.00. (Incl. GST)Specifications:
- Item Name: FS-iA6B
- Channel: 6
- Frequency Range: 2.4055–2.475GHZ
- Band Width Number: 140
- Transmitting Power: ≤ 20dBm
- RF Receiver Sensitivity: -105dbm
- 2.4G Mode: The second generation of an enhanced version of the automatic FM digital system
- Encoding: GFSK
- Antenna Length: 26mm * 2 (dual antenna)
- Input Power: 4.0-6.5V DC
- Dimension: 47 x 26.2 x 15mm
- Color: Black
- i-Bus Interface: Yes
- Data Acquisition Interface: Yes
- Model Type: Airplane / Glider / Helicopter
- Compatible Transmitter: Compatible with FS-i4,FS-i6,FS-i10,FS-GT2E,FS-GT2G