Shop

DRV8825 Stepper Motor Driver with Aluminum Heat Sink

SKU: SB-149

In stock

83.00 (Incl. GST)

Specifications:
Supply Voltage: 8.2 – 42 VDC.
Current Capacity: 2.2A max(24V).
Continuous current per phase: 1.5 A.
Minimum Logic voltage: 2.5V.
Maximum Logic Voltage: 5V.
Micro step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
Dimensions: 15 x 20 mm.
Weight: 4 gm.

DRV8833 2 Channel DC Motor Driver

SKU: SB-150

In stock

72.00 (Incl. GST)

Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
Operating voltage: 2.7‌‌ V to 10.8 V
Output current: 1.2 A continuous (2 A peak) per motor
Inputs are 3V- and 5V-compatible

Dry Reed Pipe Magnetron Magnetic switch Module

SKU: S-016

In stock

70.00 (Incl. GST)

Specifications:
Clean, good waveform driving ability, more than 15mA.
Working voltage 3.3V-5
Output format: digital switching output (0 and 1)
A fixed bolt holes for easy installation
PCB size: 3.2cm x 1.4cm

DS 1307 IC

SKU: D052

In stock

67.00 (Incl. GST)

Specifications
I2C Interface RTC IC
Operating Voltage: 5V
Less than 500nA current when operating with battery
56bytes SVRAM
Operates in power or battery mode
Programmable square wave output pin
Available in PDIP and SO package

DS1307 RTC Module

SKU: S-064

In stock

58.00 (Incl. GST)

Specifications:
This is the DS1307 Real Time Clock developed by one of our designers.
Two-wire I2C interface.
Hour: Minutes: Seconds AM/PM.
Day Month, Date – Year.
1Hz output pin.
Consumes less than 500nA in battery backup mode with oscillator running
Available in 8-pin DIP or SOIC
Underwriters Laboratory (UL) recognized
Real-time clock (RTC) counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year compensation valid up to 2100
56-byte non-volatile RAM for data storage
56 Bytes of Non-volatile memory available to the user.
The DS1307 is accessed via the I2C protocol.
The module comes fully assembled and pre-programmed with the current time.

DS1307 SMD IC – I²C Real-Time Clock (RTC)

SKU: SIC-051

In stock

26.00 (Incl. GST)

Specifications

  • IC Type: Real-Time Clock (RTC)

  • Model: DS1307

  • Package Type: SMD (Surface Mount Device)

  • Interface: I²C (Two-Wire Serial Interface)

  • Time Format: Seconds, Minutes, Hours, Day, Date, Month, Year

  • Supply Voltage: 4.5V to 5.5V

  • Backup Power: External battery supported

  • Oscillator: External 32.768 kHz crystal required

  • Alarms: Not supported

  • RAM: 56 bytes battery-backed RAM

  • Operating Temperature: 0°C to +70°C

DS18B20 Temperature Sensor Module For Arduino

SKU: S-114

In stock

119.00 (Incl. GST)

Specifications:
Programmable Digital Temperature Sensor
Communicates using 1-Wire method
Operating voltage: 3V to 5V
Temperature Range: -55°C to +125°C
Accuracy: ±0.5°C
Output Resolution: 9-bit to 12-bit (programmable)
Unique 64-bit address enables multiplexing
Conversion time: 750ms at 12-bit
Programmable alarm options
Available as To-92, SOP and even as a waterproof sensor

DS18B20 Water Proof Temperature Probe – Black (1m)

SKU: S-058

In stock

80.00 (Incl. GST)

Specifications:

Programmable Digital Temperature Sensor
Communicates using 1-Wire method
Operating voltage: 3V to 5V
Temperature Range: -55°C to +125°C
Accuracy: ±0.5°C
Output Resolution: 9-bit to 12-bit (programmable)
Unique 64-bit address enables multiplexing
Conversion time: 750ms at 12-bit
Programmable alarm options
Available as To-92, SOP and even as a waterproof sensor

DS3231 Real Time Clock Module 3.3V 5V Precise, with battery

SKU: S-138

In stock

134.00 (Incl. GST)

Specifications:

Highly Accurate RTC Completely Manages All
Timekeeping Functions
• Real-Time Clock Counts Seconds, Minutes, Hours,
Date of the Month, Month, Day of the Week, and
Year, with Leap-Year Compensation Valid Up to 2100
• Accuracy ±2ppm from 0°C to +40°C
• Accuracy ±3.5ppm from -40°C to +85°C
• Digital Temp Sensor Output: ±3°C Accuracy
• Register for Aging Trim
• RST Output/Pushbutton Reset Debounce Input
• Two Time-of-Day Alarms
• Programmable Square-Wave Output Signal

DS3231 RTC Module Precise Real Time Clock I2C AT24C32

SKU: S-017

In stock

110.00 (Incl. GST)

Specifications:

Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
Time Format: HH: MM: SS (12/24 hr).
1 Hz output pin SQW.
Date Format: YY-MM-DD-dd.
DS 3231 based RTC with 2032 Battery Holder.
32 KHz output pin 32K.
Size: 38mm x22mm x14mm

DS3231 SMD IC – High-Accuracy Real-Time Clock (RTC)

SKU: SIC-049

In stock

161.00 (Incl. GST)

Specifications

  • IC Type: Real-Time Clock (RTC)

  • Model: DS3231

  • Package Type: SMD (Surface Mount Device)

  • Interface: I²C

  • Oscillator: Built-in TCXO (Temperature Compensated)

  • Time Accuracy: ±2 ppm (0°C to +40°C)

  • Supply Voltage: 2.3V to 5.5V

  • Backup Power: Battery input supported

  • Time Format: Seconds, Minutes, Hours, Day, Date, Month, Year

  • Alarms: 2 programmable alarms

DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered

In stock

1,374.00 (Incl. GST)

Specifications :

Input Supply Voltage (VDC) – 9
Impedance (Ω) – 1MΩ
Maximum Real-time Sampling Rate -1MspsSampling Buffer Depth – 1024 bytes
Analog Bandwidth – 0-200KHz
Vertical Sensitivity – 10mV / Div – 5V / Div (1-2-5 progressive manner)
Accuracy – 12Bit
Coupling Modes- DC / AC / GND
The Horizontal Time Base Range – 10μs / Div – 50s / Div (1-2-5 progressive manner)