Shop

LM324N PDIP-14 Operational Amplifier

SKU: D028

In stock

13.00 (Incl. GST)

Wide supply voltage ranges
Low supply-current drain independent of supply voltage
Common-mode input voltage range includes ground, allowing direct sensing near ground
Low input bias and offset parameters
Internal frequency compensation
Common mode input voltage range includes ground, allowing direct sensing near ground
Input offset voltage is typical 3mV
Input offset current is typical 2nA
A differential input voltage range of 32V equal to the maximum rated supply voltage

LM336 Precision Adjustable Voltage Reference – 2.5V Reference Diode

SKU: D182

In stock

7.08 (Incl. GST)

Specification:

Parameter Value
Device Type Precision Voltage Reference
Output Reference Voltage 2.5V
Adjustability ±10% trimming range
Temperature Stability ±6 mV max
Dynamic Impedance 0.6 Ω typical
Operating Current 400 µA – 10 mA
Operating Temperature −25°C to +85°C
Package TO-92 / SMD (varies by variant)

LM336-2.5V Precision Voltage Reference IC

SKU: D093

In stock

8.00 (Incl. GST)

Specifications:

  • Reference Voltage: 2.5V

  • Output Tolerance: ±1% (typical)

  • Temperature Stability: 20 ppm/°C (typical)

  • Operating Current: 400 µA to 10 mA

  • Adjustable output: ±10 mV trim range

  • Operating Temperature: 0°C to +70°C

  • Package Type: TO-92 / SOIC (depending on variant)

lm339 IC

In stock

35.00 (Incl. GST)

Features:
Contains 7 high-voltage and high current Darlington pairs
Each pair is rated for 50V and 500mA
Input pins can be triggered by +5V
All seven Output pins can be connected to gather to drive loads up to (7×500mA) ~3.5A.
Can be directly controlled by logic devices like Digital Gates, Arduino, PIC etc
Available in 16-pin DIP, TSSOP, SOIC packages

LM339 Low Power Low Offset Voltage Quad Comparator IC DIP-14 Package

SKU: D029

In stock

31.00 (Incl. GST)

The LM346N is a quad programmable bipolar operational amplifier in a DIP-16 package, ideal for signal conditioning, amplification, and filtering. Its precision and flexibility make it suitable for industrial, automotive, and consumer electronics applications.

Features:
Quad Amplifier Design: Four independent operational amplifiers in a single IC.
Programmable Functionality: Adjustable gain and feedback for versatile applications.
High Precision: Bipolar architecture ensures accurate linear performance.
DIP-16 Package: Compact design for easy integration into various circuits.
Wide Application Range: Suitable for signal conditioning, filtering, and analog computations.
Reliable Performance: Designed for industrial, automotive, and consumer electronics use.

LM35 Temperature Sensor (original)

SKU: D082

In stock

60.00 (Incl. GST)

Specifications

Calibrated Directly in Celsius (Centigrade)
Linear + 10-mV/°C Scale Factor
0.5°C Ensured Accuracy (at 25°C)
Rated for Full −55°C to 150°C Range
Suitable for Remote Applications
Low-Cost Due to Wafer-Level Trimming
Operates From 4 V to 30 V
Less Than 60-µA Current Drain
Low Self-Heating, 0.08°C in Still Air
Non-Linearity Only ±¼°C Typical
Low-Impedance Output, 0.1 Ω for 1-mA Load
Body Temperature Measurement

LM358 SMD IC – Dual Operational Amplifier (Op-Amp)

SKU: SIC-075

In stock

Specifications

  • IC Type: Dual Operational Amplifier (Op-Amp)

  • Model: LM358

  • Channels: 2

  • Supply Voltage: 3V to 32V (single) / ±1.5V to ±16V (dual)

  • Package Type: SMD (SOIC-8 / MSOP-8, variant dependent)

  • Low Power Consumption: Yes

  • Unity Gain Stable: Yes

  • Operating Temperature: -40°C to +85°C

  • RoHS Compliance: Yes

LM358P PDIP-8 High Gain Operational Amplifier

SKU: D030

In stock

15.00 (Incl. GST)

Features:
Wide supply voltage ranges
Low supply-current drain independent of supply voltage
Common-mode input voltage range includes ground, allowing direct sensing near ground
Low input bias and offset parameters
Internal frequency compensation
Applications: Sensing & Instrumentation, Communications & Networking, Audio.

LM385Z-2.5G – 2.5V 20mA Micropower Voltage Reference 3pin TO-92

SKU: D092

In stock

27.00 (Incl. GST)

IC Name: LM385Z-2.5G
Package/Case: SMD-3

LM386 Audio Amplifier Module

Out of stock

60.00 (Incl. GST)

Specifications:

Onboard LM386 Chip.
200 multiplier benefits circuit design.
On-board speaker wiring Block.
On-board 10K variable resistor, you can adjust the volume of the enlarged.
Onboard power indicator.

LM386 Low Voltage Audio Power Amplifier IC DIP-8 Pin

SKU: D031

In stock

13.00 (Incl. GST)

Specifications:

Part number: LM386
Audio input type: Analog Input
Architecture: Class-AB
Speaker channels (Max): Mono
Power stage supply (Min) : 4(V)
Power stage supply (Max) : 18(V)
Output power (W): 0.325
Load (Min)(ohms): 4
THD + N @ 1 kHz (%): 0.2
Analogue supply (Min) (V): 4
Analog supply (Max )(V): 18

LM393 Low Power Low Offset Voltage Dual Comparator IC DIP

SKU: D032

In stock

10.00 (Incl. GST)

IC Name: LM393
Package/Case: DIP-8
supply current: 0.45 mA
voltage range: 2 V to 36 V (single), ±1 V to ±18 V (dual)