Showing 745–756 of 1105 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
MAX9814 High Performance Microphone AGC Amplifier Module CMA- 4544PF-W
In stock
₹216.00 (Incl. GST)Supply Voltage: 2.7v-5.5v @ 3mA current
Output: 2Vpp on 1.25V bias
Frequency Response: 20Hz – 20 KHz
Programmable Attack and Release Ratio
Automatic gain, selectable max from 40dB, 50dB, or 60dB
MAX98357 I2S 3W Class D Amplifier Interface Audio Decoder Module Filterless Board For Raspberry Pi ESP32
In stock
₹135.00 (Incl. GST)Specifications:
3.2 W output at 10% THD, 4 Ω impedance of the speaker and 5 V power supply
2.7 – 5.5 V operating voltage
77 dB PSRR at 1 kHz
Selectable gains: 3 dB, 6 dB, 9 dB, 12 dB, 15 dB
MB10M Bridge Rectifier (DIP Package)
In stock
₹10.00 (Incl. GST)Specifications:
Type: Bridge Rectifier
Maximum Repetitive Peak Reverse Voltage (VRRM): 1000V
Average Forward Current (Io): 0.5A
Peak Forward Surge Current (Ifsm): 30A
Forward Voltage Drop (Vf): 1.1V per diode (typical)
Operating Temperature Range: -55°C to +150°C
Package Type: MB10 (DIP / SIL package)
Mounting Type: Through-hole / PCB mount
MBR2590 Schottky Rectifier – 25A 90V High-Current Schottky Diode (TO-220)
In stock
₹236.00 (Incl. GST)SPECIFICATION
-
Diode Type: Schottky Rectifier
-
Package: TO-220
-
Maximum Forward Current (If): 25A
-
Reverse Voltage (Vr): 90V
-
Low Forward Voltage Drop: Yes
-
Fast switching capability
-
High surge current handling
-
Low power loss & high efficiency
MC14024BCP 7-Stage Binary Ripple Counter IC
In stock
₹70.00 (Incl. GST)Specifications:
Logic Family: CMOS 4000 Series
Type: 7-Stage Ripple Binary Counter
Supply Voltage Range: 3 V to 18 V
Trigger Type: Negative-edge triggered
Reset Type: Asynchronous (active high)
Propagation Delay (Clock to Q1): ~295 ns
Maximum Frequency: Up to 2.5 MHz (at 5 V)
Operating Temperature: −55 °C to +125 °C
Package Type: DIP-14 (Through Hole)
Manufacturer: ON Semiconductor / Motorola
Status: Discontinued (available as replacement CD4024B)
MC14503BCP CMOS Hex Buffer IC (DIP Package)
In stock
₹24.00 (Incl. GST)Specifications:
Type: Hex Non-Inverting Buffer
Technology: CMOS
Number of Channels: 6
Supply Voltage Range: 3V to 18V
Input Current: ±1 µA (max)
Output Current: ±6.8 mA at 15V
Propagation Delay: 60 ns (typical at 10V)
Operating Temperature Range: -55°C to +125°C
Package Type: 16-Pin DIP
Mounting Type: Through-Hole
Manufacturer: ON Semiconductor / Motorola
MC1458P-Texas Instruments-Operational Amplifier, 2 Channels, 1 MHz, 0.5 V/µs, ± 5V to ± 15V, DIP, 8 Pins
In stock
₹64.00 (Incl. GST)MPN: MC1458P
Brand: Texas Instruments
MCP1700T-3302 SMD Low Dropout Voltage Regulator – 3.3V LDO
In stock
₹55.00 (Incl. GST)Specifications
-
IC Type: Low Dropout (LDO) Voltage Regulator
-
Model: MCP1700T-3302
-
Output Voltage: 3.3V (Fixed)
-
Output Current: Up to 250mA
-
Input Voltage Range: 2.3V to 6.0V
-
Dropout Voltage: Typical 178mV @ 250mA
-
Quiescent Current: 1.6 µA (typical)
-
Output Accuracy: ±3%
-
Protection: Overcurrent & thermal shutdown
-
Operating Temperature: -40°C to +125°C
-
Package Type: SMD (SOT-23)
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
In stock
₹91.00 (Incl. GST)Specifications :
Input Supply voltage: 5V
Input Supply Current: 5 mA
Communication Rate: 1 Mbps
Support CAN V2.0B technical standard, communication rate 1Mb / S.
0 to 8 bytes long data field.
Use High-speed CAN transceiver TJA1050
SPI control for expanding Multi CAN bus interface
Use serial port could view the communication data
With the independent key, LED indicator, Power indicator
With power pin
Positioning screw hole center spacing 23 mm x 38 mm
The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
MCP4921-E/P-MICROCHIP-Digital to Analogue Converter, 12 bit, 3 Wire, Serial, 2.7V to 5.5V, DIP, 8 Pins
In stock
₹620.00 (Incl. GST)Resolution (Bits): 12bit
Data Interface: 3 Wire, Serial
Supply Voltage Range: 2.7V to 5.5V
No. of Pins: 8Pins
ADC / DAC Case Style: DIP
Input Channel Type: Serial
Operating Temperature: -40 to 125°C
MCP4921-E/sn 12-Bit DAC IC – SPI Digital to Analog Converter (SMD)
Out of stock
₹260.00 (Incl. GST)| Parameter | Value |
|---|---|
| Part Number | MCP4921-E/P |
| Package | SMD |
| Resolution | 12-bit DAC |
| Interface | SPI Serial Interface |
| Output Type | Voltage output (Rail-to-Rail) |
| Supply Voltage | 2.7V – 5.5V |
| Output Buffer | Built-in Output Buffer |
| Operating Temperature | –40°C to +125°C |
| Compatibility | Arduino, ESP32, STM32, PIC, ARM, Raspberry Pi (SPI) |
MCP4921-ESN SMD IC – 12-Bit SPI DAC Digital to Analog Converter
In stock
Applications
-
Digital to Analog Conversion
-
Signal generation
-
Microcontroller interfacing
-
Embedded systems
-
Industrial automation
-
Instrumentation
-
Control systems