Showing 85–96 of 372 results
Shop
Ai Thinker A9G GSM/GPRS+GPS/BDS Development Board Original
In stock
₹1,888.00 (Incl. GST)R, AM R voice coding
Support voice calls and SMS messages
Embedded network service protocol stack
Support standard GSM07.07.07.05AT command
Specifications:-
Model : A9G
Frequency : 850/900/1800/1900MHz
GPRS Multi-Slot : Class 12
GPRS Mobile Station : Class B
Compatible with GSM : Class 4 (2W@850/ 900MHz) & Class 1 (1W@1800/1900MHz)
Power Supply :3.5~4.2V typical value 4.0V
Current : 1.14mA@DRX=5 & 1.03mA@DRX=9
AT command : 3GPP TS 27.007, 27.005
Working Temperature Range (°C) : -40 to 85
Ai Thinker ESP-07 ESP8266 Serial WiFi Module
In stock
₹234.00 (Incl. GST)Features:
Compact Design: The smallest 802.11b/g/n Wi-Fi SOC module, ideal for space-constrained projects.
High Performance: Equipped with a low power 32-bit CPU that can serve as the application processor, clocked at up to 160MHz for efficient data processing.
Integrated Features: Built-in 10-bit high precision ADC, supports UART/GPIO/IIC/PWM/ADC interfaces for versatile connectivity.
Easy Integration: SMD-16 package for easy welding onto PCBs, ensuring quick and reliable assembly.
Comprehensive Connectivity: Integrated Wi-Fi MAC/BB/RF/PA/LNA, supports STA/AP/STA+AP operation modes.
Advanced Technologies: Supports Smart Config/AirKiss technology for easy setup, remote firmware upgrade (FOTA) for convenient maintenance.
Fast Communication: UART baud rate up to 4Mbps, supports general AT commands for quick configuration.
Ai Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module
In stock
₹460.00 (Incl. GST)Specifications:
LoRa ™ spread spectrum modulation technology
Super-far-distance communication 15KM
+20dBm-100mW voltage constant when the RF power output
High sensitivity: low to -148dBm
Half duplex SPI communication
Programmable bitrates up to 300kbps
Supports FSK, GFSK, MSK, GMSK, LoRa ™ and OOK modulation
127dB RSSI dynamic range
Automatic RF signal detection, CAD models and ultra high-speed AFC
With the CRC, up to 256 bytes of packet engine
Small double stamp hole size SMD package
Shielding shell
IPEX external antenna (Ra-02)
Ai Thinker NF-03 Wireless Transceiver Module
In stock
₹94.00 (Incl. GST)Built-in 2.4G antenna, compact size, easy to use
Support data reception of six channels
Modulation method: GFSK / FSK
Support 2Mbps/1Mbps/250Kbps data rate
Internally integrated high PSRR LDO
Alligator Clips Electrical DIY Test Leads 10pcs of Double-ended Crocodile Clips Roach Clip
In stock
₹90.00 (Incl. GST)Features:
Colour: Red, Green, Yellow, White, and Black, etc.
Cable length: 45 cm.
Net weight: 82 gm.
They are very useful for connecting components to wires.
It is insulation covered clips connected to the wire from both ends.
Analog TDS Sensor Module Normal Quality
In stock
₹441.00 (Incl. GST)Specifications:
Wide voltage operation: 3.3~5.5V
0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
The excitation source is an AC signal, effectively preventing probe polarization
Waterproof probe for long-term immersion in water
ARDUINO LELY PAD BIG ATMEGA328P
Out of stock
₹372.00 (Incl. GST)Features
Microcontroller : ATmega168V or ATmega328V
Operating Voltage 2.7-5.5 V
Input Voltage 2.7-5.5 V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
Flash Memory 16 KB (of which 2 KB used by bootloader)
SRAM 1 KB
EEPROM 512 bytes Clock Speed 8 MHz
Arduino Mega 2560 R3 Board A16U
In stock
₹1,199.00 (Incl. GST)Features
Microcontroller : ATmega2560
Operating Voltage : 5V
Input Voltage (recommended) : 7-12V
Input Voltage (limit) : 6-20V
Digital I/O Pins : 54 (of which 15 provide PWM output)
Analog Input Pins : 16
DC Current per I/O Pin : 20 mA
DC Current for 3.3V Pin : 50 mA
Flash Memory : 256 KB of which 8 KB used by bootloader
SRAM : 8 KB
EEPROM : 4 KB
Clock Speed : 16 MHz
LED BUILTIN : 13
Arduino Sensor Shield V5 Expansion Board
In stock
₹95.00 (Incl. GST)Quick Overview:
Retain the merits of the V4.0 version
Laminated design
PCB immersion gold processing technology
IIC interface
Bluetooth module communication interface
SD card module communication interface
APC220 wireless rf modules communication interface
RB URF v1.1 ultrasonic sensors interface
12864 LCD string of line and parallel interface
32 servo controller interface
Compatible With Arduino Uno
Arduino Uno R3 DIP
In stock
₹454.00 (Incl. GST)Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)
The Arduino Uno R3 is an open-source microcontroller board based on the ATmega328 chip. It features 14 digital input/output pins, 6 analog input pins, an onboard 16 MHz ceramic resonator, a USB connection port, a DC power jack, an ICSP header, and a reset button for the microcontroller. This board includes everything needed to support the microcontroller, making it easy to get started—simply connect it to a computer via a USB cable or power it with a DC adapter or battery.
Unlike previous models, the Uno does not use the FTDI USB-to-serial driver chip. Instead, it incorporates the Atmega16U2 (or Atmega8U2 up to version R2) as a USB-to-serial converter. The Arduino Uno can be powered through the USB connection or an external power supply, with the power source selected automatically.
External power can be supplied via an AC-to-DC adapter (wall-wart) or battery. The adapter connects through a 2.1mm center-positive plug into the board’s power jack, while battery leads can be connected to the GND and VIN pin headers of the power connector. The board can operate on an external supply ranging from 6 to 20 volts. However, if supplied with less than 7V, the 5V pin may output less than five volts, potentially leading to instability. Conversely, using more than 12V could cause the voltage regulator to overheat and damage the board. The recommended voltage range for the Arduino Uno is 5V to 12V.
Features
Operating Voltage: 5V
MCU: ATMEGA 328P
Input Voltage (recommended): 7-12V.
Input Voltage (limit): 6-20V.
Digital I/O Pins: 14
PWM Digital I/O Pins: 6
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB
Flash Memory for Bootloader: 0.5 KB
SRAM: 2 KB
EEPROM: 1 KB
Clock Speed: 16 MHz
Arduino Uno R3 with Cable
In stock
₹520.00 (Incl. GST)Specifications:
ATmega328 Controller
Digital IO 13
PWM Channel 6
Working Freq. 16MHz
DC current / IO 40mA
DC current / IO 50mA (3.3V)
Input Voltage 6V to 20V DC
Flash 32Kb
SRAM 2Kb
EEPROM 1Kb