Showing 193–204 of 377 results
Shop
ICM-20602 6DOF 6-Axis Accelerometer Gyroscope Motion Sensor
In stock
₹1,298.00 (Incl. GST)Model Name- ICM-20602
Graphics Card Interface Integrated System Bus Standard Supported- SATA 3
Infrared Obstacle Avoidance Sensor Module
In stock
₹72.00 (Incl. GST)Detection distance: 2-40cm
IO Interface: 4-wire interfaces (- / + / S / EN)
Output signal: TTL level
Adjustment: adjust multi-turn resistance
Effective angle: 35 °
INMP441 MEMS High Precision Omnidirectional Microphone Module I2S
In stock
₹190.00 (Incl. GST)Specifications:
Digital I2S interface with high precision 24-bit data
High signal to noise ratio is 61 dBA
High sensitivity – 26 dBFS
Stable frequency response from 60 Hz to 15 kHz
Low power consumption: low current consumption 1.4 mA
High PSR: -75 dBFS
IR Line Sensor 5 ARRAY (DIGITAL)
In stock
₹250.00 (Incl. GST)Specifications:
Input voltage: 5V DC
High accuracy in tracking black / white line.
Front Obstacle Sensor, distance can be adjusted
Size – 127 mm X 50mm (L X W)
Mounting Holes for good fitting
IR Proximity Sensor Module Kit
In stock
₹150.00 (Incl. GST)Specifications:
Operating Voltage: 5V DC
Sensing Range: Adjustable (typically 2 cm to 30 cm)
Sensor Type: TSOP-based IR receiver
Transmitter: Infrared (IR) LED
Control IC: NE555 Timer IC
Output Type: Digital (High/Low)
Output Indicator: Onboard LED
Adjustment: Onboard Potentiometer for range tuning
Connector Type: 3-pin relimate (VCC, GND, OUT)
Mounting Holes: Yes (for easy installation)
PCB Size: Approx. 3.5cm x 2.0cm
Applications: Obstacle detection, line-following robots, home automation, security systems
IR Sensor Digital Single Array Line Sensor
In stock
₹29.00 (Incl. GST)Specifications:
There is an obstacle, the green indicator light on the circuit board
Detection distance: 2 ~ 30cm
Detection angle: 35 °
Comparator chip: LM393
3mm screw holes for easy mounting
IRF520 MOSFET Driver Module for Arduino ARM Raspberry Pi
In stock
₹47.00 (Incl. GST)Specification:
Voltage: 3.3V and 5V
Port: Digital level
Output load voltage: 0-24V
Platform: MCU, ARM , Raspberry Pi
Size: 33*24mm
Weight: 10 g
ISD1820 Voice Recording Module With Speaker
In stock
₹169.00 (Incl. GST)Specifications:
An easy to use 10 seconds of voice recording.
High-quality, natural voice restored.
Can be used as a propaganda module.
With looping, jog playback, single-pass play function.
Available single-chip control.
This module can directly drive a small speaker 8 ohms 0.5W.
Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control.
JHD 20×4 character LCD Display with Green/Yellow Backlight
In stock
₹411.00 (Incl. GST)Specifications:
20 Characters x 4 Lines
Works directly with ATMEGA, ARDUINO, PIC, and many other microcontrollers/kits.
4 or 8 bit data I/O interface
Low power consumption
Color: Yellow/Green
Jumper Wire assorted Set of MM-MF-FF 10pc each 20cm
In stock
₹45.00 (Incl. GST)This combo of breadboard wires is a must have, it has 10 male to male connecting wires, 10 female to male connecting wires, and 10 female to female connecting wires that can help you in making all types of breadboard module connections. The connector wires will provide neat and secure connections, helping you with fast prototyping. This is a combo set of 10-10 rainbow color different jumper wires. They can be used for interconnecting electronic components on breadboard or berg strips. The wires are 20 cm long.