Showing 253–264 of 1105 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
47µH (47uH) CD104 SMD Inductor – Power Inductor
In stock
Specifications
-
Inductance Value: 47µH (47uH)
-
Series: CD104
-
Component Type: Power Inductor
-
Mounting Type: Surface Mount (SMD)
-
Core Type: Ferrite
-
Tolerance: ±20% (typical)
-
Low DC Resistance: Yes
-
High Current Handling: Yes
-
RoHS Compliance: Yes
49E Hall Effect Sensor
In stock
₹25.00 (Incl. GST)Specification:
Supply Voltage – 3 to 6.5 V
Max Output Current – 20 mA
Quiescent Output Voltage- ½ of VCC
Sensitivity- 2.5 mV/G
Minimum Output Voltage – 0.86 V
Max Output Voltage – 4.21 V
4mH (4 milliHenry) Inductor – Through Hole Coil
In stock
₹12.00 (Incl. GST)Specifications
-
Inductance Value: 4mH (4 milliHenry)
-
Component Type: Inductor / Coil
-
Mounting Type: Through Hole (THT)
-
Core Type: Ferrite (typical)
-
Tolerance: ±20% (typical)
-
Rated Current: Varies by model
-
RoHS Compliance: Yes
4N35 IC – Optocoupler Phototransistor IC
In stock
₹17.70 (Incl. GST)IC Name: 4N35
Package/Case: DIP-6
4N90 MOSFET – 900V N-Channel Power MOSFET
In stock
₹22.00 (Incl. GST)SPECIFICATION
-
Transistor Type: N-Channel MOSFET
-
Drain–Source Voltage (Vds): 900V
-
Continuous Drain Current (Id): 4A (typical)
-
Package: TO-220
-
RDS(on): Low resistance for efficient switching
-
Gate Threshold Voltage: Standard MOSFET gate level
-
High-speed switching performance
-
Low gate charge for efficient operation
4S 14.8V 10A BMS Li-ion 18650 Battery Protection Board
Out of stock
₹161.00 (Incl. GST)Specifications :
Over charge protection voltage : 4.225±0.050 V
Over charge recovery voltage : 4.125±0.050 V
Over charge protection delay time : 1S
Continuous Discharge Current :10A
Over discharge protection voltage : 2.70±0.050 V
Over discharge recovery voltage : 3.00±0.050 V
Over discharge protection delay time : 1S
Over current protection current : 14A
Short circuit delay time : 300uS
PCM Size : 35 mm * 35 mm.
4X4 Matrix Membrane Keypad
In stock
₹40.00 (Incl. GST)Specifications:
Operating Voltage (V): 12 DC
Operating temperature: 32 to 122 °F
Maximum Rating: 24 VDC, 30 mA
Keypad Dimensions: 6.9 cm X 7.9 cm
Cable dimensions: 2.0 cm X 8.8 cm
Maximum rating: 24 VDC, 30 mA
Pin counts: 8
Compatible with: Arduino, controller, processor etc
5 in 1 Sensor Kit for Arduino
In stock
₹260.00 (Incl. GST)Features:
-
Compatible with Arduino, ESP32, ESP8266, Raspberry Pi, and other microcontrollers
-
Easy to use – plug and play with jumper wires
-
Great for DIY projects, robotics, and IoT applications
-
Ideal for students, hobbyists, and makers
5-36v Switch Drive High-power MOSFET Trigger Module
In stock
₹37.00 (Incl. GST)Specifications:
Operating Voltage: 5V to 36V DC.
Trigger Voltage:
Low-level trigger: 0V to 2.5V
High-level trigger: 3V to 24V
MOSFET Type: Typically N-channel.
Maximum Load Current: Depends on the specific MOSFET used, often up to 10A or higher.
Power Dissipation: Varies, but ensure proper heat sinking for high-power applications.
Switching Frequency: Can handle high frequencies, often in the range of 10kHz to 100kHz.
Control Signal Isolation: Optical isolation or separate ground to protect the control circuit.
Dimensions: Varies, but commonly compact for integration into larger systems (e.g., 50mm x 26mm).
Protection Features: May include overcurrent, overvoltage, and thermal protection, depending on the module design.
Typical Applications: Motor control, LED lighting, heater control, and other high-power switching applications.
5-Way DIP Switch – 5 Position Dual In-Line Slide Switch for PCB
In stock
₹15.00 (Incl. GST)Specifications:
Type: 5-Position DIP (Dual In-Line Package)
Switch Type: SPST (Single Pole Single Throw)
Number of Switches: 5 individual ON/OFF
Contact Rating: 24V DC / 25mA
Pitch: 2.54 mm standard
Actuator Type: Slide switch
Mounting Type: Through-Hole PCB mount
Body Color: Red / Blue (varies by model)
Insulation Resistance: ≥100 MΩ
Operating Temperature: -25°C to +85°C
Material: Flame-retardant plastic housing
Durability: Over 2,000 operations per switch
5.5 x 2.1mm Female DC Power Jack PCB Mount
In stock
₹10.00 (Incl. GST)Specification:
Plug Type: 5.5 x 2.1mm
Rating : DC 30V 3A
Insulation Resistance : ≥100MΩ (DC250V)
Insertion And Extraction Force : 3 – 20N
5.5×2.1mm DC Power Jack Socket Panel Mount (Female)
In stock
₹10.00 (Incl. GST)Features:
Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
Supports DC Power Jack: 2.1 x 5.5 mm
Diameter: 14mm