Showing 277–288 of 1105 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
5MM Red Flicker Led
In stock
₹1.80 (Incl. GST)Specifications:
Color: Red
Peak Wavelength: 590 nm
Package: Round 5 mm (T-1 3/4)
Lens type: Water-clear
Viewing angle: 20 degrees
Intensity: 2200 mCd typ. at 20 mA
DC forward current: 30 mA
Forward voltage (typical): 2.1 V
Lead-free (RoHS compliant)
Manufacturer: Betlux Electronics
Manufacturer part number: BL-L513UYC-B-S3
5MM Red On-Off Led
In stock
₹1.80 (Incl. GST)Specifications:
Colour: Red
Peak Wavelength: 590 nm
Package: Round 5 mm (T-1 3/4)
Lens type: Water-clear
Viewing angle: 20 degrees
Intensity: 2200 mCd typ. at 20 mA
DC forward current: 30 mA
Forward voltage (typical): 1.9V – 2.1 V
Lead-free (RoHS compliant)
5mm Red/Yellow-Green Bi-Colour (Common Cathode) 3 Pin LED Clear Lens
In stock
₹6.00 (Incl. GST)
5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
In stock
₹284.00 (Incl. GST)Resolution: 5 MP
Interface Type: CSI(Camera Serial Interface)
Dimensions: 25x23x8 (LxWxH) mm
Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
Fully Compatible with Raspberry Pi 3 and 4 Model B
Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
5V 1 Channel Relay Module
In stock
₹45.00 (Incl. GST)Specification
Trigger Voltage: 5 VDC
Trigger Current : 20 mA
Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
Single Pole Double Throw (SPDT) Configuration
Power supply indicator lamp
5V 1 Channel Single Relay Module 30A Power Failure Relay
In stock
₹153.00 (Incl. GST)Specifications:
Voltage version: 5V
The static current: 5mA
Working current: 190mA
Trigger current: 2-4mA
The module can be set high level or low-level trigger by the jumper
Rated current of the interface is 16A
5V 1A DC Power Supply Adapter with DC Pin
In stock
₹118.00 (Incl. GST)-
Input Voltage: 100–300V AC, 50/60Hz
-
Output Voltage: 5V DC
-
Output Current: 1A
-
Output Connector: DC Pin
-
Output Type: Stabilized DC
-
Ripple & Noise: Low ripple, low interference
-
Indicator: Power LED monitor
-
Protection: Short circuit & overload protection
-
Efficiency: High efficiency, low power consumption
-
Application: Arduino, electronic modules, routers, DIY projects
5V 2A DC Power Supply Adapter with DC Pin
In stock
₹236.00 (Incl. GST)-
-
Input Voltage: 100–300V AC, 50/60Hz
-
Output Voltage: 5V DC
-
Output Current: 2 Amp
-
Output Connector: DC Pin
-
Output Type: Stabilized DC
-
Ripple & Noise: Low ripple, low interference
-
Indicator: Power LED monitor
-
Protection: Short circuit & overload protection
-
Efficiency: High efficiency, low power consumption
-
Application: Arduino, Raspberry Pi, electronic modules, routers, LED devices
-
5V 2Channel Relay Module (with Optocoupler)
In stock
₹90.00 (Incl. GST)Features
High current relay, AC250V 10A, D 30V 10A
2 LEDs to indicate when relays are on
Supply voltage – 3.75V to 6V
Trigger current – 5mA
Current when relay is active – ~70mA (single), ~140mA (both)
Relay maximum contact voltage – 250VAC, 30VDC
Relay maximum current – 10A
Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
5V 4 Channel Relay Module (with Optocoupler)
In stock
₹140.00 (Incl. GST)Specifications:
1. Supply voltage – 3.75V to 6V
2. Trigger current – 5mA
3. Current when the relay is active – ~70mA (single), ~300mA (all four)
4. Relay maximum contact voltage – 250VAC, 30VDC
5. Relay maximum current – 10A
6. Triode drive, increasing relay coil
7. High impedance controller pin
8. Pull-down circuit for avoidance of malfunction
9. Power supply indicator and Control indicator lamp
10. Power supply and relay instructions, lit, disconnect is off
11. Input signal, signal, common Terminal and start conducting
12. Useful for appliance control
13. DC or AC signal, control, you can control the 220V AC load
5V 7A Sugar Cube Relay
In stock
₹25.00 (Incl. GST)Features:
Trigger Voltage (Voltage across coil) : 5V DC
Trigger Current (Nominal current) : 70mA
Maximum AC load current: 7A @ 240/125V AC
Maximum DC load current: 7A @ 30/28V DC
Compact 5-pin configuration with plastic moulding
Operating time: 10msec Release time: 5msec
Maximum switching: 300 operating/minute (mechanically)
5V Buzzer
In stock
₹13.00 (Incl. GST)Input Voltage(Max.) : 5V
Resistance: 42 Ω
Resonance Frequency: 2048 Hz
Body Size : 12 x 8mm
Pin Pitch: 6mm
External Material: Plastic;
Color: Black