Showing 529–540 of 1111 results
Shop
Filter by brands
AdafruitAdafruit 1- Atmel 1
- DOAT 1
- FLYSKY 1
- FUTABA 1
- IDEAL 8
- Johnson 8
- MASTECH 1
- OMRON 5
- OZO 1
- POSH 1
- Raspberry Pi 3
- SanDisk 2
- Seeed Studio 2
- SOLDRON 6
- Tower Pro 5
WaveshareWaveshare 6
DFRobot Gravity: 1602 LCD Keypad Shield For Arduino
In stock
₹1,059.00 (Incl. GST)Product: 1602 LCD Keypad Shield
Operating Voltage: 5V
Expanded available I/O pins
Compatible with Arduino
DHT-11 Temperature And Humidity Sensor
In stock
₹100.00 (Incl. GST)Specifications:
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA (measuring) 60uA (standby)
Output: Serial data
Temperature Range: 0°C to 50°C
Humidity Range: 20% to 90%
Resolution: Temperature and Humidity both are 16-bit
Accuracy: ±1°C and ±1%
DHT11 Temperature And Humidity Sensor Module
In stock
₹65.00 (Incl. GST)Input Supply voltage (VDC): 3.3 ~ 5
Supply Current (mA): measurement 0.3mA standby 60μA.
Temperature measurement range: 0~50 degrees
Temperature measurement error: ±2 degrees
Humidity measurement range: 20%~95%RH
Humidity measurement error: ±5%RH
DHT22 Digital Temperature and Humidity Sensor Module AM2302
In stock
₹129.00 (Incl. GST)Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
High precision
Capacitive type
Full range temperature compensated
Relative humidity and temperature measurement
Calibrated digital signal
Outstanding long-term stability
DHT22 Digital Temperature and Humidity Sensor-Standard Quality
Out of stock
₹130.00 (Incl. GST)Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA (measuring) 60uA (standby)
Output: Serial data
Temperature Range: -40°C to 80°C
Humidity Range: 0% to 100%
Resolution: Temperature and Humidity both are 16-bit
Accuracy: ±0.5°C and ±1%
Digispark ATTINY85 Mini USB Development Board
In stock
₹279.00 (Incl. GST)Specifications :
High Performance, Low Power AVR® 8-Bit Microcontroller
Non-volatile Program and Data Memories
8K Bytes of In-System Programmable Program Memory Flash
Endurance: 10,000 Write/Erase Cycles
512 Bytes In-System Programmable EEPROM
512 Bytes Internal SRAM
Peripheral Features
Two High-Frequency PWM Outputs with Separate Output Compare Registers
USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
10-bit ADC
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
In stock
₹120.00 (Incl. GST)Specifications:
Offer 3 modes to check servos or ESC
Supply voltage: 4.8V-6.0V
Output Signal: 1.5ms±0.5ms
Three mode selection [Manual, Neutral and Auto]
Enclosure Box
Mode selection LED Indicator
Adjustable Knob for manual speed control
Operating Temperature Range: -40~+85°C
The Manual Mode allows you to turn the knob to different speeds and check the reaction time
The Neutral mode makes the servo go back to the neutral point
The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
Connect to up to 3 servos simultaneously.
Digitek (DCR-007) USB-A 3.0 & Type C High-Speed Multi-Card Reader DCR-007
In stock
₹284.00 (Incl. GST)- USB-A 3.0 Port + Type C Port
- 2 in 1 Connector Card Reader:
- Compact Card Reader: Supports All Standard SD / SDHC / SDXC and Micro SD / Micro SDHC / Micro SDXC Cards.
- Type C OTG Support Function: Reads SD / T-Flash card directly on your
- USB C and OTG Supported Devices. When adding an Memory Cards, your Card Reader is turned into a U Flash Disk.
- Plug and Play : No Driver Installation Required.
- Supports Android Smartphones, Tablets, PCs, Laptops
- System Supports : Windows, Mac OS and Android Compatible.
- Speed: Super Speed up to 5Gbps
DK1203 Charger IC – 2 Pieces | High-Efficiency Power Management IC
In stock
₹40.00 (Incl. GST)SPECIFICATIONS
IC Type: Charger / Power Management IC
Model: DK1203
Quantity: 2 Pieces
Input Voltage: Typically 5V – 12V
Output: Regulated charging voltage for Li-ion/Li-Po batteries
Features: Overcurrent protection, thermal shutdown, high efficiency
Package: DIP / SMD (depending on stock)
DM860H Digital Stepper Motor Driver with Micro Stepping 24 to 80V 7.2A
In stock
Original price was: ₹3,299.00.₹3,186.00Current price is: ₹3,186.00. (Incl. GST)Specifications:
- Input Voltage : AC18-80V, DC24-110V 7.2A
- Material: Aluminium Alloy
- Pulse Width: <2.5us
- Pulse input frequency up to 300 KHz
- Pulse Signal: +12V/+24V (Requires Cross-Resistance to Limit Current)
- Colour: As Pictures Shown
- Weight: About 550g
Dot Matrix MAX 7219 DISPLAY 4 in 1
Out of stock
₹305.00 (Incl. GST)Specifications:
Dimensions: 128 x 32 x 1.5 cm(L x W x H)(All 4 in 1)
A single module can drive an 8×8 dot matrix common cathode
Operating voltage: 5V
Weight: 55 gm
Fixing screws with 64 holes with a diameter 3mm
Module with input and output interfaces
Support for cascading multiple modules
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
In stock
₹254.00 (Incl. GST)Specifications:
Input voltage(V): 6 – 27.
Maximum current(A): 43.
Input level(V): 3.3 – 5.
Duty cycle: 0 – 100%.
Path resistance: 16 mΩ at 25°C.
Low quiescent current: 7 µA at 25°C.